Took vp9_setup_scale_factors_for_frame() out from
vp9_setup_interp_filters(), so that it is only called once per
frame instead of per macroblock. Decoder tests showed a 1.5%
performance gain.

Change-Id: I770cb09eb2140ab85132f82aed388ac0bdd3a0aa

Almost all arguments for vp9_build_inter32x32_predictors_sb and
vp9_build_inter64x64_predictors_sb can be deduced from the first macroblock
argument.

Change-Id: I5d477a607586d05698d5b3b9b9bc03891dd3fe83

Adding b_mv_pred_row and b_mv_pred_col functions, updating
mi_mv_pred_row and mi_mv_pred_row functions.

Change-Id: I9af068442d4474478375943cc6fce1605d6fc0a5

Adds an experiment to use a weighted prediction of two INTER
predictors, where the weight is one of (1/4, 3/4), (3/8, 5/8),
(1/2, 1/2), (5/8, 3/8) or (3/4, 1/4), and is chosen implicitly
based on consistency of the predictors to the already
reconstructed pixels to the top and left of the current macroblock
or superblock.

Currently the weighting is not applied to SPLITMV modes, which
default to the usual (1/2, 1/2) weighting. However the code is in
place controlled by a macro. The same weighting is used for Y and
UV components, where the weight is derived from analyzing the Y
component only.

Results (over compound inter-intra experiment)
derf: +0.18%
yt: +0.34%
hd: +0.49%
stdhd: +0.23%

The experiment suggests bigger benefit for explicitly signaled weights.

Change-Id: I5438539ff4485c5752874cd1eb078ff14bf5235a

Renaming Width to width, Height to height and Version to version in
several structs and function signatures.

Change-Id: I084c3f7e747cb2ce3345aff27a3dff9b13a87543

Updates the YV12_BUFFER_CONFIG structure to be crop-aware. The
exiting width/height parameters are left unchanged, storing the
width and height algined to a 16 byte boundary. The cropped
dimensions are added as new fields.

This fixes a nasty visual pulse when switching between scaled and
unscaled frame dimensions due to a mismatch between the scaling
ratio and the 16-byte aligned sizes.

Change-Id: Id4a3f6aea6b9b9ae38bdfa1b87b7eb2cfcdd57b6

Use the uv_stride from the framebuffer rather than deriving it from the
y_stride.

Change-Id: I94581cb741539d094ff062b3d008235556903b8c

Change-Id: Iab0176f058045181821ded95ff1cf423af1625f9

This avoids duplicating all the filters twice. Includes fixups to the
convolve routines and associated tests to make this work.

Change-Id: I922f86021594e55072ddb63b42b2313605db6e00

This commit updates the 4x4 prediction to consistently use the
build_2x1_inter_predictor() method. That function is updated to
calculate the scale offset, rather than relying on the caller
to calculate it. In the case that the 2x1 prediction can not
be used, the scale offset is recalculated for each 1x1 block.
The idea here is that the offsets are calculated before each
call to vp9_build_scaled_inter_predictor().

Change-Id: I0ac3343dd54e2846efa3c4195fcd328b709ca04d

This patch allows coding frames using references of different
resolution, in ZEROMV mode. For compound prediction, either
reference may be scaled.

To test, I use the resize_test and enable WRITE_RECON_BUFFER
in vp9_onyxd_if.c. It's also useful to apply this patch to
test/i420_video_source.h:

  --- a/test/i420_video_source.h
  +++ b/test/i420_video_source.h
  @@ -93,6 +93,7 @@ class I420VideoSource : public VideoSource {

     virtual void FillFrame() {
       // Read a frame from input_file.
  +    if (frame_ != 3)
       if (fread(img_->img_data, raw_sz_, 1, input_file_) == 0) {
         limit_ = frame_;
       }

This forces the frame that the resolution changes on to be coded
with no motion, only scaling, and improves the quality of the
result.

Change-Id: I1ee75d19a437ff801192f767fd02a36bcbd1d496

Ensure that all inter prediction goes through a common code path
that takes scaling into account. Removes a bunch of duplicate
1st/2nd predictor code. Also introduces a 16x8 mode for 8x8
MVs, similar to the 8x4 trick we were doing before. This has an
unexpected effect with EIGHTTAP_SMOOTH, so it's disabled in that
case for now.

Change-Id: Ia053e823a8bc616a988a0af30452e1e75a739cba

Replace as_mv.{first, second} with a two element array, so that they
can easily be processed with an index variable.

Change-Id: I1e429155544d2a94a5b72a5b467c53d8b8728190

Update the code to call the new convolution functions to do subpixel
prediction rather than the existing functions. Remove the old C and
assembly code, since it is unused. This causes a 50% performance
reduction on the decoder, but that will be resolved when the asm for
the new functions is available.

There is no consensus for whether 6-tap or 2-tap predictors will be
supported in the final codec, so these filters are implemented in
terms of the 8-tap code, so that quality testing of these modes
can continue. Implementing the lower complexity algorithms is a
simple exercise, should it be necessary.

This code produces slightly better results in the EIGHTTAP_SMOOTH
case, since the filter is now applied in only one direction when
the subpel motion is only in one direction. Like the previous code,
the filtering is skipped entirely on full-pel MVs. This combination
seems to give the best quality gains, but this may be indicative of a
bug in the encoder's filter selection, since the encoder could
achieve the result of skipping the filtering on full-pel by selecting
one of the other filters. This should be revisited.

Quality gains on derf positive on almost all clips. The only clip
that seemed to be hurt at all datarates was football
(-0.115% PSNR average, -0.587% min). Overall averages 0.375% PSNR,
0.347% SSIM.

Change-Id: I7d469716091b1d89b4b08adde5863999319d69ff

Change-Id: If6c88752dffdb566f8d4322f135145270716fb8e

This patch removes the old pred-filter experiment and replaces it
with one that is implemented using the switchable filter framework.

If the pred-filter experiment is enabled, three interopolation
filters are tested during mode selection; the standard 8-tap
interpolation filter, a sharp 8-tap filter and a (new) 8-tap
smoothing filter.

The 6-tap filter code has been preserved for now and if the
enable-6tap experiment is enabled (in addition to the pred-filter
experiment) the original 6-tap filter replaces the new 8-tap smooth
filter in the switchable mode.

The new experiment applies the prediction filter in cases of a
fractional-pel motion vector. Future patches will apply the filter
where the mv is pel-aligned and also to intra predicted blocks.

Change-Id: I08e8cba978f2bbf3019f8413f376b8e2cd85eba4

Change-Id: I0df99742029834a85c4933652b0587cf5b6b2587

3.2% gains on std/hd, 1.0% gains on hd.

Change-Id: I481d5df23d8a4fc650a5bcba956554490b2bd200

Various fixups to resolve issues when building vp9-preview under the more stringent
checks placed on the experimental branch.

Change-Id: I21749de83552e1e75c799003f849e6a0f1a35b07

For coefficients, use int16_t (instead of short); for pixel values in
16-bit intermediates, use uint16_t (instead of unsigned short); for all
others, use uint8_t (instead of unsigned char).

Change-Id: I3619cd9abf106c3742eccc2e2f5e89a62774f7da

Add a function clip_pixel() to clip a pixel value to the [0,255] range
of allowed values, and use this where-ever appropriate (e.g. prediction,
reconstruction). Likewise, consistently use the recently added function
clip_prob(), which calculates a binary probability in the [1,255] range.
If possible, try to use get_prob() or its sister get_binary_prob() to
calculate binary probabilities, for consistency.

Since in some places, this means that binary probability calculations
are changed (we use {255,256}*count0/(total) in a range of places,
and all of these are now changed to use 256*count0+(total>>1)/total),
this changes the encoding result, so this patch warrants some extensive
testing.

Change-Id: Ibeeff8d886496839b8e0c0ace9ccc552351f7628

Adds support for compound inter-intra prediction with superblocks.
Also, fixes a bug that disabled intra modes for superblocks.

Change-Id: I4d711317e1bc19df8c2f32dc645429f7fff31036

Change-Id: Ieefd76e164ca4aa87597da0412977614ddfbacb7

Change-Id: Ia1cce221f8511561b9cbd8edb7726fbc286ff243

Support for gyp which doesn't support multiple objects in the same
static library having the same basename.

Change-Id: Ib947eefbaf68f8b177a796d23f875ccdfa6bc9dc

Removed the rtcd subpixel invoke functions.

Change-Id: I8b7618bd5813333fac66b2817bdf807616e0fb33

A patch on compound inter-intra prediction.

In compound inter-intra prediction, a new predictor for
16x16 inter coded MBs are obtained by combining a single
inter predictor with a 16x16 intra predictor, in a manner
that the weight varies with distance from the top/left
boundary. The current search strategy is to combine the best
inter mode with the best intra mode obtained independently.

Results so far:

derf +0.31%
yt +0.32%
std-hd +0.35%
hd +0.42%

It is conceivable that the results would improve somewhat
with a more thorough search strategy where all intra modes
are searched given the best mv, or even a joint search for
the best mv and the best intra mode.

Change-Id: I7951f1ed0d6eb31ca32ac24d120f1585bcd8d79b

Change-Id: Ia1eddb108ec463835e9de8769572d698e21bca49

Update vpx_scale from current code in master, run style transform, fix
lint warnings.

Change-Id: I47eadeb5b6881d448ea3728537f9b8a5b5aac78e

Change-Id: Ic084c475844b24092a433ab88138cf58af3abbe4

Most of these were picked up by jenkins in the commit that changed
the vp8 namespace to vp9 in common/.

Change-Id: I5cbd56ffc753b92ef805133cda6acc1713a13878

For non-static functions, change the prefix to vp9_. For static functions,
remove the prefix. Also fix some comments, remove unused code or unused
function prototypes.

Change-Id: I1f8be05362f66060fe421c3d4c9a906fdf835de5

This change encompasses VP8_PTR, VP8_COMP, VP8D_COMP, VP8_COMMON,
VP8Decompressor and VP8Common.

Change-Id: I514ef4ad4e682370f36d656af1c09ee20da216ad

Change-Id: Ic5a5f60e1ff9d9ccae4174160d36529466eeb509

There is a macro DEFAULT_INTERP_FILTER defined in encoder/onyx_if.c that
is set as EIGHTTAP for now - so SWITCHABLE is not really used. Ideally,
this should be SWITCHABLE but that would make the encoder quite a bit slower.
We will change the default filter to SWITCHABLE once we find a faster way to
search for switchable filters.

Change-Id: Iee91832cdc07e6e14108d9b543130fdd12fc9874

This can be used to distinguish between 16x8, 8x16, 8x8 and 4x4
partitioning modes when choosing splitmv as a MB mode.

Change-Id: Idc8b59772e1a80ccc4ad44d63c5c2ec3fc061a3c

Change-Id: I76095d5a02edcc5d404ea830157780b24fd509d7

This reinstates reverted commit 2113a831

Change-Id: I9a9af13497d1e58d4f467e3e083fddf06b1b786c

This reverts commit 2113a831

Code clean up - removed rtcd

Change-Id: Id963ecf53c370b1d99484ef18d6befeed7e0c748