1. 15 Jun, 2012 1 commit
    • Deb Mukherjee's avatar
      Adaptive entropy coding of coefficients, modes, mv. · 1fe85a35
      Deb Mukherjee authored
      This patch incorporates adaptive entropy coding of coefficient tokens,
      and mode/mv information based on distributions encountered in a frame.
      Specifically, there is an initial forward update to the probabilities
      in the bitstream as before for coding the symbols in the frame, however
      at the end of decoding each frame, the forward update to the
      probabilities is reverted and instead the probabilities are updated
      towards the actual distributions encountered within the frame.
      The amount of update is weighted by the number of hits within each
      context.
      
      Results on derf/hd/std-hd are all up by 1.6%.
      
      On derf, the most of the gains come from coefficients, however for the
      hd and std-hd sets, the most of the gains come from the mode/mv
      information updates.
      
      Change-Id: I708c0e11fdacafee04940fe7ae159ba6844005fd
      1fe85a35
  2. 28 Feb, 2012 1 commit
    • Deb Mukherjee's avatar
      Initial refactoring of high_precision mv code. · 3e1cad9c
      Deb Mukherjee authored
      This is the first patch for refactoring of the code related to
      high-precision mv, so that 1/4 and 1/8 pel motion vectors can
      co-exist in the same bit-stream by use of a frame level flag.
      The current patch works fine for only use of 1/4th and
      only use of 1/8th pel mv, but there are some issues with the
      mode switching in between. Subsequent patches on this change Id
      will fix the remaining issues.
      
      Patch 2: Adds fixes to make sure that multiple mv precisions can
      co-exist in the bit-stream. Frame level switching has been tested
      to work correctly.
      
      Patch 3: Fixes lines exceeding 80 char
      
      Patch 4:
      http://www.corp.google.com/~debargha/vp8_results/enhinterp.html
      
      Results on derf after ssse3 bugfix, compared to everything
      enabled but the 8-tap, 1/8-subpel and 1/16-subpel uv. Overall the
      gains are about 3% now. Hopefully there are no more bugs lingering.
      Apparently the sse3 bug affected the quartel subpel results more than
      the eighth pel ones (which is understandabale because one bad predictor
      due to the bug, matters less if there are a lot more subpel options
      available as in the 1/8 subpel case).
      The results in the 4th column correspond to the current settings.
      The first two columns correspond to two settings of adaptive switching
      of the 1/4 or 1/8 subpel mode based on initial Q estimate. These
      do not work as good as just using 1/8 all the time yet.
      
      Change-Id: I3ef392ad338329f4d68a85257a49f2b14f3af472
      3e1cad9c
  3. 23 Feb, 2012 2 commits
    • Deb Mukherjee's avatar
      Clean ups and minor changes in high precision mv with 8-tap interpolation · fb472c5b
      Deb Mukherjee authored
      * Removes EDGE_PIXEL_FILTER for external sanpshot
      * changes the default 8-tap filter based on high precision results
      in http://www.corp.google.com/~debargha/vp8_results/enhinterpn.html
      * changes the default prob tables for high-precision mv encoding to
      favor zeros in the last bit (i.e. quarter pel). This is only important
      for short clips.
      
      Change-Id: I02bb0de8679d9eec06cdbcc8160dbf073cd847a4
      fb472c5b
    • Deb Mukherjee's avatar
      Supporting high precision 1/8-pel motion vectors · 18e90d74
      Deb Mukherjee authored
      This is the initial patch for supporting 1/8th pel
      motion. Currently if we configure with enable-high-precision-mv,
      all motion vectors would default to 1/8 pel. Encode and
      decode syncs fine with the current code. In the next phase
      the code will be refactored so that we can choose the 1/8
      pel mode adaptively at a frame/segment/mb level.
      
      Derf results:
      http://www.corp.google.com/~debargha/vp8_results/enhinterp_hpmv.html
      (about 0.83% better than 8-tap interpoaltion)
      
      Patch 3: Rebased. Also adding 1/16th pel interpolation for U and V
      
      Patch 4: HD results.
      http://www.corp.google.com/~debargha/vp8_results/enhinterp_hd_hpmv.html
      Seems impressive (unless I am doing something wrong).
      
      Patch 5: Added mmx/sse for bilateral filtering, as well as enforced
      use of c-versions of subpel filters with 8-taps and 1/16th pel;
      Also redesigned the 8-tap filters to reduce the cut-off in order to
      introduce a denoising effect. There is a new configure option
      sixteenth-subpel-uv which will use 1/16 th pel interpolation for
      uv, if the motion vectors have 1/8 pel accuracy.
      
      With the fixes the results are promising on the derf set. The enhanced
      interpolation option with 8-taps alone gives 3% improvement over thei
      derf set:
      http://www.corp.google.com/~debargha/vp8_results/enhinterpn.html
      
      Results on high precision mv and on the hd set are to follow.
      
      Patch 6: Adding a missing condition for CONFIG_SIXTEENTH_SUBPEL_UV in
      vp8/common/x86/x86_systemdependent.c
      
      Patch 7: Cleaning up various debug messages.
      
      Patch 8: Merge conflict
      
      Change-Id: I5b1d844457aefd7414a9e4e0e06c6ed38fd8cc04
      18e90d74
  4. 28 Oct, 2010 2 commits
    • Timothy B. Terriberry's avatar
      Eliminate more warnings. · 97b766a4
      Timothy B. Terriberry authored
      This eliminates a large set of warnings exposed by the Mozilla build
       system (Use of C++ comments in ISO C90 source, commas at the end of
       enum lists, a couple incomplete initializers, and signed/unsigned
       comparisons).
      It also eliminates many (but not all) of the warnings expose by newer
       GCC versions and _FORTIFY_SOURCE (e.g., calling fread and fwrite
       without checking the return values).
      There are a few spurious warnings left on my system:
      
      ../vp8/encoder/encodemb.c:274:9: warning: 'sz' may be used
       uninitialized in this function
      gcc seems to be unable to figure out that the value shortcut doesn't
       change between the two if blocks that test it here.
      
      ../vp8/encoder/onyx_if.c:5314:5: warning: comparison of unsigned
       expression >= 0 is always true
      ../vp8/encoder/onyx_if.c:5319:5: warning: comparison of unsigned
       expression >= 0 is always true
      This is true, so far as it goes, but it's comparing against an enum,
       and the C standard does not mandate that enums be unsigned, so the
       checks can't be removed.
      
      Change-Id: Iead6cd561a2afaa3d801fd63f1d8d58953da7426
      97b766a4
    • Timothy B. Terriberry's avatar
      Eliminate more warnings. · c4d7e5e6
      Timothy B. Terriberry authored
      This eliminates a large set of warnings exposed by the Mozilla build
       system (Use of C++ comments in ISO C90 source, commas at the end of
       enum lists, a couple incomplete initializers, and signed/unsigned
       comparisons).
      It also eliminates many (but not all) of the warnings expose by newer
       GCC versions and _FORTIFY_SOURCE (e.g., calling fread and fwrite
       without checking the return values).
      There are a few spurious warnings left on my system:
      
      ../vp8/encoder/encodemb.c:274:9: warning: 'sz' may be used
       uninitialized in this function
      gcc seems to be unable to figure out that the value shortcut doesn't
       change between the two if blocks that test it here.
      
      ../vp8/encoder/onyx_if.c:5314:5: warning: comparison of unsigned
       expression >= 0 is always true
      ../vp8/encoder/onyx_if.c:5319:5: warning: comparison of unsigned
       expression >= 0 is always true
      This is true, so far as it goes, but it's comparing against an enum, and the C
       standard does not mandate that enums be unsigned, so the checks can't be
       removed.
      
      Change-Id: Iaf689ae3e3d0ddc5ade00faa474debe73b8d3395
      c4d7e5e6
  5. 09 Sep, 2010 1 commit
  6. 18 Jun, 2010 1 commit
    • John Koleszar's avatar
      cosmetics: trim trailing whitespace · 94c52e4d
      John Koleszar authored
      When the license headers were updated, they accidentally contained
      trailing whitespace, so unfortunately we have to touch all the files
      again.
      
      Change-Id: I236c05fade06589e417179c0444cb39b09e4200d
      94c52e4d
  7. 04 Jun, 2010 1 commit
  8. 18 May, 2010 1 commit