eob is limited by GetCoeffs

Change-Id: Ie5c0d024796fe6c9b2db0374892544e421bd5d09

Change-Id: I0027483e47900de84394de47c3273cc8292e6119

Change-Id: Ie9a26be7c9baa54a0e43a63ed6c77f2746477a9c

Change-Id: I289564a5a27f0d03ddc6f19c7838542ff22719be

Change-Id: Ic084c475844b24092a433ab88138cf58af3abbe4

For non-static functions, change the prefix to vp9_. For static functions,
remove the prefix. Also fix some comments, remove unused code or unused
function prototypes.

Change-Id: I1f8be05362f66060fe421c3d4c9a906fdf835de5

This change encompasses VP8_PTR, VP8_COMP, VP8D_COMP, VP8_COMMON,
VP8Decompressor and VP8Common.

Change-Id: I514ef4ad4e682370f36d656af1c09ee20da216ad

For local symbols, make them static instead.

Change-Id: I13d60947a46f711bc8991e16100cea2a13e3a22e

Change-Id: Ic5a5f60e1ff9d9ccae4174160d36529466eeb509

Change-Id: Ie2e3652591b010ded10c216501ce24fd95d0aec5

Change-Id: Ie8ba934a757acec1c80ac37ab9307c9a2783254e

Change-Id: I23aa5547b1e74f31327258dda0e330aae7ca1d35

Preparation for project restructuring.
Added vp9_ prefix on some function names that have global scope.
Added static declaration on some that dont.

Change-Id: If072f78b4300e8c17cfeed82c5d17b59946dcc5e

Change-Id: Ie33f7d0f90d0e5862be975d676a700d06f79eec6

Change-Id: Ibb51f3f8c3575d4621890220b20887a13a46a04e

Change-Id: Ibc4425bb6e01606751021e57c93106c365a2da21

Change-Id: I99f1982b30a630a9a070a8326d83b34a33cba14c

For splitmv, where partitioning is 8x16, 16x8 or 8x8, this patch
uses the 8x8 transform (instead of the 4x4) if txfm_mode is
ALLOW_8X8 or ALLOW_16X16. For TX_MODE_SELECT, splitmv can indicate
which of the 2 transform sizes (4x4 or 8x8) it wants to use.

Gains (with hybridtx4x4/8x8/16x16 and tx_select experiments
enabled) on derf: +0.9%, HD: +0.4%, STD/HD: +0.8% (SSIM or overall
PSNR, both metrics show similar improvements).

Change-Id: Ide954b000b415548ed92a7ac78e24f36e60fcf06

Separates the logic on transform type selection previously spread out
over a number of files into a separate function. Currently the tx_type
field in b_mode_info is not used, but still left in there to eventually
use for signaling the transform type in the bitstream.

Also, now for tx_type = DCT_DCT, the regular integer DCT is used, as
opposed to the floating point DCT used in conjuction with hybrid
transform.

Results change somewhat due to the transform change, but are within
reasonable limits. The hd/std-hd sets are slightly up, while derf/yt
are slightly down.

Change-Id: I5776840c2239ca2da31ca6cfd7fd1148dc5f9e0f

This way a caller doesn't need to implement the logic for which (and how
many) tokens to write out to stuff one macroblock worth of EOBs. Make
the actual function implementations static, since they are now only used
in tokenize.c; also do some minor stylistic changes so it follows the
style guide a little more closely; use PLANE_TYPE where appropriate,
remove old (stale) frame_type function arguments; hardcode plane type
where only a single one is possible (2nd order DC or U/V EOB stuffing);
support stuffing 8x8/4x4 transform EOBs with no 2nd order DC.

Change-Id: Ia448e251d19a4e3182eddeb9edd034bd7dc16fa3

Change the macros PLANE_TYPE_{Y_NO_DC,Y2,UV,Y_WITH_DC} to a typed enum,
and use this typed enum consistently across all places where relevant.
In places where the type is implied (e.g. in functions that only handle
second order planes or chroma planes), remove it as a function argument
and instead hardcode the proper enum in the code directly.

Change-Id: I93652b4a36aa43163d49c732b0bf5c4442738c47

Also merge the three occurrences of 4x4 chroma block writing into a
single function, and call that function instead of duplicating the
4x4 chroma tokenization code in 3 places.

Change-Id: I7913538d1029f709b0e3ae49fff1148d3be9eeb9

This includes trellis optimization, forward/inverse transform,
quantization, tokenization and stuffing functions.

Change-Id: Ibd34132e1bf0cd667671a57b3f25b3d361b9bf8a

Change-Id: I22aa803ffff330622cdb77277e7b196a9766f882

A variety of issues related to tangling of various hybrid transform
experiments.

Change-Id: I84dac65ff513f8b024407760df55fffa95e198de

Separates the entropy coding context models for 4x4, 8x8 and 16x16
ADST variants.

There is a small improvement for HD (hd/std-hd) by about 0.1-0.2%.
Results on derf/yt are about the same, probably because there is not
enough statistics.

Results may improve somewhat once the initial probability tables are
updated for the hybrid transforms which is coming soon.

Change-Id: Ic7c0c62dacc68ef551054fdb575be8b8507d32a8

With this change, even if hybridtransform8x8 experiment is off,
8x8 dct is used for the I8x8 mode. However note that the gains
observed with the hybridtransform8x8 experiment will now be less,
since part of the gain is now merged in.

Change-Id: I9afb3880906fd0a1368a374041fc08efcf060c54

Some cleanups on the transform size and type selection logic.

Change-Id: If2e9675459482242cf83b4f7de7634505e3f6dac

This reverts commit c5af82b7

There was a mismatch bug introduced by this patch. Hence reverting until it is fixed.

Some cleanups that will make it easier to maintain the code
and incorporate upcoming changes on  entropy coding for the
hybrid transforms.

Change-Id: I44bdba368f7b8bf203161d7a6d3b1fc2c9e21a8f

Enable ADST/DCT of dimension 16x16 for I16X16 modes. This change provides
benefits mostly for hd sequences.

Set up the framework for selectable transform dimension.

Also allowing quantization parameter threshold to control the use
of hybrid transform (This is currently disabled by setting threshold
always above the quantization parameter. Adaptive thresholding can
be built upon this, which will further improve the coding performance.)

The coding performance gains (with respect to the codec that has all
other configuration settings turned on) are

derf:   0.013
yt:     0.086
hd:     0.198
std-hd: 0.501

Change-Id: Ibb4263a61fc74e0b3c345f54d73e8c73552bf926

Change-Id: I1ccb2546e29803d0e9d69282409d549a28201967

Further cases of inconsistent naming convention.

Change-Id: Id3411ecec6f01a4c889268a00f0c9fd5a92ea143

The reference motion vector selected by surrounding pixels that has
the best matching score is used as nearest motion vector.

The change has shown consistent gain on all test sets, compression
gains range from .2% to .6%. The variation is largely dependent on
various other experiments on or off.

Change-Id: I5552e1c2f6fc57c3e8818a5ee41ffda89af05e75

Using surrounding reconstructed pixels from left and above to select
best matching mv to use as reference motion vector for mv encoding.

Test results:
       AVGPSNR  GLBPSNR VPXSSIM
Derf:  1.107%   1.062%  0.992%
Std-hd:1.209%   1.176%  1.029%

Change-Id: I8f10e09ee6538c05df2fb9f069abcaf1edb3fca6

Fixed the code review comments.

Under the htrans8x8 experiment the 8X8 DCT in the
I8X8 mode is replaced with a combination of 8X8 ADST and
DCT.

Overall coding gains with the htrans8x8 experiment are:
derf:   0.486
std-hd: 1.040
hd:     1.063
yt:     0.506

Note that part of the gain comes from bigger transforms
(8x8 instead of 4x4) and part comes from replacing the DCT
wth the ADST.

Change-Id: I92ca6bbfce11b4165d612b81d9adfad4d010c775

Set on all 16x16 intra/inter modes

Features:
- Butterfly fDCT/iDCT
- Loop filter does not filter internal edges with 16x16
- Optimize coefficient function
- Update coefficient probability function
- RD
- Entropy stats
- 16x16 is a config option

Have not tested with experiments.

hd:     2.60%
std-hd: 2.43%
yt:     1.32%
derf:   0.60%

Change-Id: I96fb090517c30c5da84bad4fae602c3ec0c58b1c

Apply 2D-DCT transform of dimension 8x8 to encode prediction
residuals of I8X8 mode.
Brought back block type 3 probability context model for 8x8 tokens,
which is used for the coefficients of Y blocks in I8x8 modes. The
coefficient costs estimate of I8X8 mode in rate-distortion is also
changed appropriately.
Performance results:
derf:   0.246
yt:     0.114
std-hd: 0.730
hd:     0.670

Change-Id: If1d970eeb4e1827c9f0d2c5b27d33089b347ea27

The following five experiments are merged:

newentropy
newupdate
adaptive_entropy (also includes a couple of parameter changes
                  that improves results a little
                  in common/entropymode.c and encoder/modecosts.c
                  that were not merged from the internal branch)
newintramodes
expanded_coef_context

Change-Id: I8a142a831786ee9dc936f22be1d42a8bced7d270

Change-Id: Id2bac0597b6dd1ce41bd78cbd9e9d876b71cd8a2