1. 12 Jul, 2013 1 commit
    • Johann's avatar
      Remove print_nmvcounts · e6ab476d
      Johann authored
      For some reason iOS builds take a really long time to sort this
      function out.
      
      It's not used anywhere so remove it.
      
      Change-Id: Ia5c8513a0d9c7eb32641cca58ca1c1113e2dd9f4
      e6ab476d
  2. 26 Jun, 2013 1 commit
    • Paul Wilkins's avatar
      Auto adapt step size feature. · 9f3ab834
      Paul Wilkins authored
      Also tweaks to other features and experiments with
      what is on and off at different speed settings.
      
      Change-Id: I3e1d0be0d195216bf17c2ac5df67f34ce0b306b2
      9f3ab834
  3. 25 Jun, 2013 1 commit
  4. 24 Jun, 2013 1 commit
  5. 19 Jun, 2013 1 commit
  6. 07 Jun, 2013 1 commit
    • Ronald S. Bultje's avatar
      Change ref frame coding. · 6ef805eb
      Ronald S. Bultje authored
      Code intra/inter, then comp/single, then the ref frame selection.
      Use contextualization for all steps. Don't code two past frames
      in comp pred mode.
      
      Change-Id: I4639a78cd5cccb283023265dbcc07898c3e7cf95
      6ef805eb
  7. 26 May, 2013 1 commit
    • Ronald S. Bultje's avatar
      Remove splitmv. · 5cac6607
      Ronald S. Bultje authored
      Also do per-partition motion vector referencing in <sb8x8 partitions,
      and adjust mvref finding for sub8x8 partitions.
      
      Change-Id: Id3ed1ed4d2a8910d11d327db6cc63b8eb79f941f
      5cac6607
  8. 23 May, 2013 1 commit
    • Jingning Han's avatar
      Merge 4x4 block level partition into codebase · 7ac5ac52
      Jingning Han authored
      Move 4x4/4x8/8x4 partition coding out of experimental list.
      
      This commit fixed the unit test failure issues. It also resolved
      the merge conflicts between 4x4 block level partition and iterative
      motion search for comp_inter_inter.
      
      Change-Id: I898671f0631f5ddc4f5cc68d4c62ead7de9c5a58
      7ac5ac52
  9. 19 May, 2013 1 commit
    • Jingning Han's avatar
      Enable bit-stream support to 8x4 and 4x8 partition · 810b612c
      Jingning Han authored
      The recursive partition type search is enabled down to 4x4, 4x8 and
      8x4, followed by the corresponding rate-distortion optimization for
      the per-partition encoding mode decisions.
      
      The bit-stream writing/reading synchronized in supporting the
      rectangular partition of 8x8 block.
      
      This provides above 1% coding performance gains on derf.
      
      To do next:
      1. re-design the rate-distortion loop for inter prediction below 8x8.
      2. re-design the rate-distortion loop for intra prediction below 4x4.
      3. make the loop-filter aware of rectangular partition of 8x8 block.
      4. clean the unused probability models.
      5. update default probability values.
      
      Change-Id: Idd41a315b16879db08f045a322241f46f1d53f20
      810b612c
  10. 17 May, 2013 1 commit
    • Jingning Han's avatar
      Make nmv_count update 4x8/8x4 aware · 5f3612c3
      Jingning Han authored
      This commit modifies the vp9_update_nmv_count_ to support rectangular
      partition of 8x8 block.
      
      Change-Id: I3e742f80f18f95b031c1c785d756d9365503c24c
      5f3612c3
  11. 15 May, 2013 1 commit
    • Dmitry Kovalev's avatar
      Combining integer and fractional parts of mvs for entropy coding. · 18375238
      Dmitry Kovalev authored
      Combining encode_nmv_component with encode_nmv_component_fp
      and read_nmv_component with read_nmv_component_fp. Bitstream is slightly
      changed (only the order of bits), here are the results on test sets:
      stdhd: +0.047, yt: -0.038, derf: +0.001, hd: -0.011.
      
      Change-Id: I1be312e976796df78ca63368702d0ee19f2b8c50
      18375238
  12. 17 Apr, 2013 1 commit
  13. 15 Apr, 2013 1 commit
  14. 11 Apr, 2013 1 commit
    • Dmitry Kovalev's avatar
      Encoder code cleanup. · ec299e20
      Dmitry Kovalev authored
      Removing duplicated code from vp9_encodemv.c and reusing ROUND_POWER_OF_TWO
      macro definitions.
      
      Change-Id: I9caf0c17f761ada7905cb99a3e2a31f871fef0f9
      ec299e20
  15. 29 Nov, 2012 1 commit
  16. 28 Nov, 2012 1 commit
  17. 27 Nov, 2012 1 commit
    • John Koleszar's avatar
      Add vp9_ prefix to all vp9 files · fcccbcbb
      John Koleszar authored
      Support for gyp which doesn't support multiple objects in the same
      static library having the same basename.
      
      Change-Id: Ib947eefbaf68f8b177a796d23f875ccdfa6bc9dc
      fcccbcbb
  18. 16 Nov, 2012 1 commit
    • Deb Mukherjee's avatar
      Compound inter-intra experiment · 0c917fc9
      Deb Mukherjee authored
      A patch on compound inter-intra prediction.
      
      In compound inter-intra prediction, a new predictor for
      16x16 inter coded MBs are obtained by combining a single
      inter predictor with a 16x16 intra predictor, in a manner
      that the weight varies with distance from the top/left
      boundary. The current search strategy is to combine the best
      inter mode with the best intra mode obtained independently.
      
      Results so far:
      
      derf +0.31%
      yt +0.32%
      std-hd +0.35%
      hd +0.42%
      
      It is conceivable that the results would improve somewhat
      with a more thorough search strategy where all intra modes
      are searched given the best mv, or even a joint search for
      the best mv and the best intra mode.
      
      Change-Id: I7951f1ed0d6eb31ca32ac24d120f1585bcd8d79b
      0c917fc9
  19. 13 Nov, 2012 1 commit
    • Deb Mukherjee's avatar
      A fix in MV_REF experiment · 7de64f35
      Deb Mukherjee authored
      This fix ensures that the forward prob update is not turned off for
      motion vectors.
      
      Change-Id: I0b63c9401155926763c6294df6cca68b32bac340
      7de64f35
  20. 06 Nov, 2012 1 commit
    • Yaowu Xu's avatar
      silent a lot of MSVC compiler warnings · 8a336b0d
      Yaowu Xu authored
      there are still a couple type of warning left, which are related to
      double constants assigned to float type. As those would be addressed
      by the conversion of transforms into integer version. This commit
      has left those un-dealt with.
      
      Change-Id: I48fd9b489c0c27ad6b543f4177423419f929f2bb
      8a336b0d
  21. 01 Nov, 2012 2 commits
  22. 31 Oct, 2012 4 commits
  23. 22 Oct, 2012 1 commit
  24. 19 Oct, 2012 1 commit
    • John Koleszar's avatar
      Remove bc, bc2 from pbi,cpi,xd · e9fd1eac
      John Koleszar authored
      Pass the bool coder to be used explicitly. This avoids cases where two
      different bool coders can be addressed from the same function. Also be
      more consistent with bool coder variable naming, start to standardize
      on 'bc'.
      
      Change-Id: I1c95e2fdbe24ebe8c0f84924daa1728e3b054a31
      e9fd1eac
  25. 17 Oct, 2012 3 commits
    • John Koleszar's avatar
      cosmetic: fix '= & ' construct · 3883dab0
      John Koleszar authored
      remove useless space after address-of operator.
      
      Change-Id: I1fb9e82e8d6cf87558fbd454fb5c0f87599ca2ab
      3883dab0
    • John Koleszar's avatar
      Move remaining per-frame data into partition 0 · 47a2154c
      John Koleszar authored
      This commit moves a bit of data that ended up packed with the
      modes/mv/residual partition during the change to interleaved encoding
      into partition 0 where it belongs.
      
      Change-Id: Ic711a378c58d9d6a17254384f492c213a15bad92
      47a2154c
    • John Koleszar's avatar
      Interleave modes/residual per macroblock · 6ef5a005
      John Koleszar authored
      Packs the bitstream with each mb's residual following its mode/mv
      information.
      
      TODO: There are still a few fields that should be packed into partition
      0 but are included in partition 1, due to them being serialized from
      write_kfmodes/pack_inter_mode_mvs, which execute after the first
      partition is finalized. These need to be separated out into a separate
      function, similar to mb_mode_mv_init() in decodemv.c.
      
      Change-Id: I43a46c363601ab36954d07ebe498760e1e2e3af4
      6ef5a005
  26. 12 Sep, 2012 1 commit
    • Deb Mukherjee's avatar
      Adds feature for companded MV encoding · 2b26cf17
      Deb Mukherjee authored
      The high-precision (1/8) pel bit is turned off if the reference
      MV is larger than a threshold. The motivation for this patch is
      the intuition that if motion is likely large (as indicated by
      the reference), there is likley to be more motion blur, and as
      a result 1/8 pel precision would be wasteful both in rd sense
      as well as computationally.
      
      The feature is incorporated as part of the newmventropy experiment.
      There is a modest RD improvement with the patch. Overall the
      results with the newmventropy experiment with the threshold being
      16 integer pels are:
      
      derf: +0.279%
      std-hd: +0.617%
      hd: +1.299%
      yt: +0.822%
      
      With threshold 8 integer pels are:
      
      derf: +0.295%
      std-hd: +0.623%
      hd: +1.365%
      yt: +0.847%
      
      Patch: rebased
      Patch: rebase fixes
      
      Change-Id: I4ed14600df3c457944e6541ed407cb6e91fe428b
      2b26cf17
  27. 06 Sep, 2012 1 commit
    • Deb Mukherjee's avatar
      New motion vector entropy coding · 00f9eb65
      Deb Mukherjee authored
      Adds a new experiment with redesigned/refactored motion vector entropy
      coding. The patch also takes a first step towards separating the
      integer and fractional pel components of a MV. However the fractional
      pel encoding still depends on the integer pel part and so they are
      not fully independent. Further experiments are in progress to see
      how much they can be decoupled without affecting performance.
      All components including entropy coding/decoding, costing for MV
      search, forward updates and backward updates to probability tables,
      have been implemented.
      
      Results so far:
      derf: +0.19%
      std-hd: +0.28%
      yt: +0.80%
      hd: +1.15%
      
      Patch: Simplifies the fractional pel models:
      derf: +0.284%
      std-hd: +0.289%
      yt: +0.849%
      hd: +1.254%
      
      Patch: Some changes in the models, rebased.
      derf: +0.330%
      std-hd: +0.306%
      yt: +0.816%
      hd: +1.225%
      
      Change-Id: I646b3c48f3587f4cc909639b78c3798da6402678
      00f9eb65
  28. 03 Aug, 2012 1 commit
    • Deb Mukherjee's avatar
      Merging in high_precision_mv experiment · 2af5473a
      Deb Mukherjee authored
      Merged in the high_precision_mv experiment to make it easier
      to work on new mv encoding strategies. Also removed
      coef_update_probs3().
      
      Change-Id: I82d3b0bb642419fe05dba82528bc9ba010e90924
      2af5473a
  29. 17 Jul, 2012 1 commit
  30. 11 Jun, 2012 1 commit
    • John Koleszar's avatar
      Fix pedantic compiler warnings · 0164a1cc
      John Koleszar authored
      Allows building the library with the gcc -pedantic option, for improved
      portabilty. In particular, this commit removes usage of C99/C++ style
      single-line comments and dynamic struct initializers. This is a
      continuation of the work done in commit 97b766a4, which removed most
      of these warnings for decode only builds.
      
      Change-Id: Id453d9c1d9f44cc0381b10c3869fabb0184d5966
      0164a1cc
  31. 21 Mar, 2012 1 commit
  32. 15 Mar, 2012 1 commit
    • Yaowu Xu's avatar
      WebM Experimental Codec Branch Snapshot · 6035da54
      Yaowu Xu authored
      This is a code snapshot of experimental work currently ongoing for a
      next-generation codec.
      
      The codebase has been cut down considerably from the libvpx baseline.
      For example, we are currently only supporting VBR 2-pass rate control
      and have removed most of the code relating to coding speed, threading,
      error resilience, partitions and various other features.  This is in
      part to make the codebase easier to work on and experiment with, but
      also because we want to have an open discussion about how the bitstream
      will be structured and partitioned and not have that conversation
      constrained by past work.
      
      Our basic working pattern has been to initially encapsulate experiments
      using configure options linked to #IF CONFIG_XXX statements in the
      code. Once experiments have matured and we are reasonably happy that
      they give benefit and can be merged without breaking other experiments,
      we remove the conditional compile statements and merge them in.
      
      Current changes include:
      * Temporal coding experiment for segments (though still only 4 max, it
        will likely be increased).
      * Segment feature experiment - to allow various bits of information to
        be coded at the segment level. Features tested so far include mode
        and reference frame information, limiting end of block offset and
        transform size, alongside Q and loop filter parameters, but this set
        is very fluid.
      * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used
        in MBs using 16x16 prediction modes within inter frames.
      * Compound prediction (combination of signals from existing predictors
        to create a new predictor).
      * 8 tap interpolation filters and 1/8th pel motion vectors.
      * Loop filter modifications.
      * Various entropy modifications and changes to how entropy contexts and
        updates are handled.
      * Extended quantizer range matched to transform precision improvements.
      
      There are also ongoing further experiments that we hope to merge in the
      near future: For example, coding of motion and other aspects of the
      prediction signal to better support larger image formats, use of larger
      block sizes (e.g. 32x32 and up) and lossless non-transform based coding
      options (especially for key frames). It is our hope that we will be
      able to make regular updates and we will warmly welcome community
      contributions.
      
      Please be warned that, at this stage, the codebase is currently slower
      than VP8 stable branch as most new code has not been optimized, and
      even the 'C' has been deliberately written to be simple and obvious,
      not fast.
      
      The following graphs have the initial test results, numbers in the
      tables measure the compression improvement in terms of percentage. The
      build has  the following optional experiments configured:
      --enable-experimental --enable-enhanced_interp --enable-uvintra
      --enable-high_precision_mv --enable-sixteenth_subpel_uv
      
      CIF Size clips:
      http://getwebm.org/tmp/cif/
      HD size clips:
      http://getwebm.org/tmp/hd/
      (stable_20120309 represents encoding results of WebM master branch
      build as of commit#7a159071)
      
      They were encoded using the following encode parameters:
      --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63
      --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999
      --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50
      --minsection-pct=0 --maxsection-pct=800 --sharpness=0
      --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF)
      --arnr-type=3
      
      Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
      6035da54
  33. 01 Mar, 2012 1 commit
  34. 28 Feb, 2012 1 commit
    • Deb Mukherjee's avatar
      Initial refactoring of high_precision mv code. · 3e1cad9c
      Deb Mukherjee authored
      This is the first patch for refactoring of the code related to
      high-precision mv, so that 1/4 and 1/8 pel motion vectors can
      co-exist in the same bit-stream by use of a frame level flag.
      The current patch works fine for only use of 1/4th and
      only use of 1/8th pel mv, but there are some issues with the
      mode switching in between. Subsequent patches on this change Id
      will fix the remaining issues.
      
      Patch 2: Adds fixes to make sure that multiple mv precisions can
      co-exist in the bit-stream. Frame level switching has been tested
      to work correctly.
      
      Patch 3: Fixes lines exceeding 80 char
      
      Patch 4:
      http://www.corp.google.com/~debargha/vp8_results/enhinterp.html
      
      Results on derf after ssse3 bugfix, compared to everything
      enabled but the 8-tap, 1/8-subpel and 1/16-subpel uv. Overall the
      gains are about 3% now. Hopefully there are no more bugs lingering.
      Apparently the sse3 bug affected the quartel subpel results more than
      the eighth pel ones (which is understandabale because one bad predictor
      due to the bug, matters less if there are a lot more subpel options
      available as in the 1/8 subpel case).
      The results in the 4th column correspond to the current settings.
      The first two columns correspond to two settings of adaptive switching
      of the 1/4 or 1/8 subpel mode based on initial Q estimate. These
      do not work as good as just using 1/8 all the time yet.
      
      Change-Id: I3ef392ad338329f4d68a85257a49f2b14f3af472
      3e1cad9c