GitLab

The result is identical to enabling both deringing and CLPF

Change-Id: I71db5ba9e21fcaf11ad87e94841eaf80be58c0a8

This commit implements a new rate control system which was ported from
Daala's rate control system (which was based off of Theora's rate
control system) to the encoder. Its aim is to address the weaknesses of
the current rate control system and eventually serve as its replacement.

This is still work in progress. So far this commit only implements
support for single pass encoding for constant quality and bitrate
targeting.
Additional commits which implement two-pass support and the rest to
match the feature set of the current rate control system are coming
soon.

The rate control system hasn't been fully tuned (and will likely need
additional tuning as the encoder's development progresses) and does
contain some "hacks", to convert the quality to a quantizer value
(empirical) and to tweak the quantizer in between golden frames (which
uses some code from the current rate control system as well as code
which attempts to model what that code does), the latter of which is
only in the constant quality codepath.

Bitrate targeting works much better than the current rate control
system's targeting and will actually closely match the rate specified by
the user without the current rate control system's bursty behaviour.

Change-Id: I588fbfd2e80a3d21ce7176903115d6a96ef1700a

Change-Id: I1bf9002c159563d0e5238b26d1515ef305d416dc

- Witness the follow user-level speedup on AV1 baseline:
 Encoding time reduction: 4.26%
 Decoding time reduction: 25.35%

Change-Id: Ideaf3cd473ad45ed9256c80d5a5daed0a6e098cf

Change-Id: I7781ba9af9bffe7f77fab862c096a911a0580e56

PVQ replaces the scalar quantizer and coefficient coding with a new
design originally developed in Daala. It currently depends on the
Daala entropy coder although it could be adapted to work with another
entropy coder if needed:
./configure --enable-experimental --enable-daala_ec --enable-pvq

The version of PVQ in this commit is adapted from the following
revision of Daala:
https://github.com/xiph/daala/commit/fb51c1ade6a31b668a0157d89de8f0a4493162a8

More information about PVQ:
- https://people.xiph.org/~jm/daala/pvq_demo/
- https://jmvalin.ca/papers/spie_pvq.pdf

The following files are copied as-is from Daala with minimal
adaptations, therefore we disable clang-format on those files
to make it easier to synchronize the AV1 and Daala codebases in the future:
 av1/common/generic_code.c
 av1/common/generic_code.h
 av1/common/laplace_tables.c
 av1/common/partition.c
 av1/common/partition.h
 av1/common/pvq.c
 av1/common/pvq.h
 av1/common/state.c
 av1/common/state.h
 av1/common/zigzag.h
 av1/common/zigzag16.c
 av1/common/zigzag32.c
 av1/common/zigzag4.c
 av1/common/zigzag64.c
 av1/common/zigzag8.c
 av1/decoder/decint.h
 av1/decoder/generic_decoder.c
 av1/decoder/laplace_decoder.c
 av1/decoder/pvq_decoder.c
 av1/decoder/pvq_decoder.h
 av1/encoder/daala_compat_enc.c
 av1/encoder/encint.h
 av1/encoder/generic_encoder.c
 av1/encoder/laplace_encoder.c
 av1/encoder/pvq_encoder.c
 av1/encoder/pvq_encoder.h

Known issues:
- Lossless mode is not supported, '--lossless=1' will give the same result as
'--end-usage=q --cq-level=1'.
- High bit depth is not supported by PVQ.

Change-Id: I1ae0d6517b87f4c1ccea944b2e12dc906979f25e

PVQ replaces the scalar quantizer and coefficient coding with a new
design originally developed in Daala. It currently depends on the
Daala entropy coder although it could be adapted to work with another
entropy coder if needed:
./configure --enable-experimental --enable-daala_ec --enable-pvq

The version of PVQ in this commit is adapted from the following
revision of Daala:
https://github.com/xiph/daala/commit/fb51c1ade6a31b668a0157d89de8f0a4493162a8

More information about PVQ:
- https://people.xiph.org/~jm/daala/pvq_demo/
- https://jmvalin.ca/papers/spie_pvq.pdf

The following files are copied as-is from Daala with minimal
adaptations, therefore we disable clang-format on those files
to make it easier to synchronize the AV1 and Daala codebases in the future:
 av1/common/generic_code.c
 av1/common/generic_code.h
 av1/common/laplace_tables.c
 av1/common/partition.c
 av1/common/partition.h
 av1/common/pvq.c
 av1/common/pvq.h
 av1/common/state.c
 av1/common/state.h
 av1/common/zigzag.h
 av1/common/zigzag16.c
 av1/common/zigzag32.c
 av1/common/zigzag4.c
 av1/common/zigzag64.c
 av1/common/zigzag8.c
 av1/decoder/decint.h
 av1/decoder/generic_decoder.c
 av1/decoder/laplace_decoder.c
 av1/decoder/pvq_decoder.c
 av1/decoder/pvq_decoder.h
 av1/encoder/daala_compat_enc.c
 av1/encoder/encint.h
 av1/encoder/generic_encoder.c
 av1/encoder/laplace_encoder.c
 av1/encoder/pvq_encoder.c
 av1/encoder/pvq_encoder.h

Known issues:
- Lossless mode is not supported, '--lossless=1' will give the same result as
'--end-usage=q --cq-level=1'.
- High bit depth is not supported by PVQ.

Change-Id: I1ae0d6517b87f4c1ccea944b2e12dc906979f25e

This flag was already added to aomedia/master, so bringing it back to
webm/nextgenv2, as part of an effort to get the two codebases in sync.

Change-Id: I2b933a6a160e4210d1411a9e7978149eb8553205

Change-Id: I46bcd006a5f026185307a15aa3987e7bd3439c19

Change-Id: Ie03f9a5b0a4c708a586532198d755a1e7509f149

- Unit tests are added for AVX2 SIMD.
- Encoder speed improvement:
  AV1 baseline and EXT_TX, three 1080p sequences at bitrate:
  800 Kbps, 2 Mbps, 6 Mbps, on i7-6700 CPU, average
  user level time reduction: 3.86%.

Change-Id: Ibbd7837ee3a831c6b1e4e471bf6c8d3fa3a19ff4

This commit ports a CLPF change from aom/master by manually
cherry-picking:
7560123c

Change-Id: I61eb08862a101df74a6b65ece459833401e81117

Change-Id: I13eed9cb6950ea4fbdd586d43b73ac0cc2d78d33

That's where it lives in aom/master.

Change-Id: I38f405827d9c2d0b06ef5f3bfd7cadc35d5991ef

This minimize code differences between AOM master and nextgenv2

Change-Id: If144865bdf3ef0818e7aac11018b9e786444c550

av1cx.mk -> av1_cx.mk
av1dx.mk -> av1_dx.mk

Change-Id: I698bd65b933c433066d5dfeb94cee680095508e4

Cherry-Picked the following commits:
0defd8f2 Changed "WebM" to "AOMedia" & "webm" to "aomedia"
54e66767 Replace "VPx" by "AVx"
5082a369 Change "Vpx" to "Avx"
7df44f17 Replace "Vp9" w/ "Av1"
967f722f Remove kVp9CodecId
828f30ce Change "Vp8" to "AOM"
030b5ffc AUTHORS regenerated
2524caee Add ref-mv experimental flag
016762be Change copyright notice to AOMedia form
81e55269 Replace vp9 w/ av1
9b94565b Add missing files
fa8ca9f2 Change "vp9" to "av1"
ec838b76  Convert "vp8" to "aom"
80edfa01 Change "VP9" to "AV1"
d1a11fb9 Change "vp8" to "aom"
7b582513 Point to WebM test data
dd1a5c8d Replace "VP8" with "AOM"
ff00fc0f Change "VPX" to "AOM"
01dee0bb Change "vp10" to "av1" in source code
cebe6f0c Convert "vpx" to "aom"
17b05679 rename vp10*.mk to av1_*.mk
fe5f8a8a rename files vp10_* to av1_*

Change-Id: I6fc3d18eb11fc171e46140c836ad5339cf6c9419