1. 24 Jan, 2013 1 commit
    • Deb Mukherjee's avatar
      Adds an error-resilient mode with test · 01cafaab
      Deb Mukherjee authored
      Adds an error-resilient mode where frames can be continued
      to be decoded even when there are errors (due to network losses)
      on a prior frame. Specifically, backward updates are turned off
      and probabilities of various symbols are reset to defaults at
      the beginning of each frame. Further, the last frame's mvs are
      not used for the mv reference list, and the sorting of the
      initial list based on search on previous frames is turned off
      as well.
      
      Also adds a test where an arbitrary set of frames are skipped
      from decoding to simulate errors. The test verifies (1) that if
      the error frames are droppable - i.e. frame buffer updates have
      been turned off - there are no mismatch errors for the remaining
      frames after the error frames; and (2) if the error-frames are non
      droppable, there are not only no decoding errors but the mismatch
      PSNR between the decoder's version of the post-error frames and the
      encoder's version is at least 20 dB.
      
      Change-Id: Ie6e2bcd436b1e8643270356d3a930e8989ff52a5
      01cafaab
  2. 16 Jan, 2013 4 commits
    • John Koleszar's avatar
      Preserve the previous golden frame on golden updates · 26bd81b9
      John Koleszar authored
      This commit restores the quality lost when the buffer-to-buffer copy
      logic was removed. Note that this is specific to the current use of
      golden frames and will need rework when RTC functionality is added.
      
      Change-Id: I7324a75acd96eafd9e0f9b8633d782e390d5dc21
      26bd81b9
    • John Koleszar's avatar
      Start to anonymize reference frames · da832a80
      John Koleszar authored
      Remove lst_fb_idx, gld_fb_idx, alt_fb_idx, refresh_last_frame,
      refresh_golden_frame, refresh_alt_ref_frame from common. Gold/Alt are
      encode side conventions. From the decoder's perspective, we want to be
      dealing with numbered references.
      
      Updates to active_ref 2 signal mode context switches, vestigial from
      refresh_alt_ref_frame. This needs some clean up to make sense with
      increased numbers of reference frames, as well as reimplementing the
      swapping of alt/golden which was previously done using the
      buffer-to-buffer copy mechanism removed in an earlier commit.
      
      Change-Id: I7334445158b7666f9295d2a2dd22aa03f4485f58
      da832a80
    • John Koleszar's avatar
      Update encoder to use fb_idx_ref_cnt · 394b0a6a
      John Koleszar authored
      Do reference counting the same way on the encoder as the decoder does,
      rather than maintaining the 'flags' member of YV12_BUFFER_CONFIG.
      
      Change-Id: I91dc210ffca081acaf9d5c09a06e7461b3c3139c
      394b0a6a
    • John Koleszar's avatar
      Remove buffer-to-buffer copy logic · b8e02798
      John Koleszar authored
      This is the first in a series of commits to add additional reference
      frames to the codec. Each frame will be able to update any of the
      available references, but copying between references is not
      supported.
      
      Change-Id: I5945b5ce6cc3582c495102b4e7eed4f08c44d5a1
      b8e02798
  3. 26 Dec, 2012 1 commit
  4. 20 Dec, 2012 1 commit
    • Deb Mukherjee's avatar
      New previous coef context experiment · 08f0c7cc
      Deb Mukherjee authored
      Adds an experiment to derive the previous context of a coefficient
      not just from the previous coefficient in the scan order but from a
      combination of several neighboring coefficients previously encountered
      in scan order.  A precomputed table of neighbors for each location
      for each scan type and block size is used. Currently 5 neighbors are
      used.
      
      Results are about 0.2% positive using a strategy where the max coef
      magnitude from the 5 neigbors is used to derive the context.
      
      Change-Id: Ie708b54d8e1898af742846ce2d1e2b0d89fd4ad5
      08f0c7cc
  5. 28 Nov, 2012 1 commit
  6. 27 Nov, 2012 1 commit
    • John Koleszar's avatar
      Add vp9_ prefix to all vp9 files · fcccbcbb
      John Koleszar authored
      Support for gyp which doesn't support multiple objects in the same
      static library having the same basename.
      
      Change-Id: Ib947eefbaf68f8b177a796d23f875ccdfa6bc9dc
      fcccbcbb
  7. 02 Nov, 2012 1 commit
    • John Koleszar's avatar
      vpx_scale: sync from master · 06f3e51d
      John Koleszar authored
      Update vpx_scale from current code in master, run style transform, fix
      lint warnings.
      
      Change-Id: I47eadeb5b6881d448ea3728537f9b8a5b5aac78e
      06f3e51d
  8. 01 Nov, 2012 2 commits
  9. 31 Oct, 2012 2 commits
  10. 30 Oct, 2012 1 commit
  11. 22 Oct, 2012 1 commit
    • John Koleszar's avatar
      postproc: allocate enough memory for limits buffer · 861a6bbb
      John Koleszar authored
      The vp8_post_proc_down_and_across_mb_row_sse2() needs space for an
      even number of macroblocks, as they are read two at a time for the
      chroma planes. Round up the width during the allocation of
      pp_limits_buffer to support this.
      
      Change-Id: Ibfc10c7be290d961ab23ac3dde12a7bb96c12af0
      861a6bbb
  12. 12 Oct, 2012 1 commit
  13. 11 Oct, 2012 2 commits
  14. 03 Aug, 2012 1 commit
    • Daniel Kang's avatar
      16x16 DCT blocks. · fed8a183
      Daniel Kang authored
      Set on all 16x16 intra/inter modes
      
      Features:
      - Butterfly fDCT/iDCT
      - Loop filter does not filter internal edges with 16x16
      - Optimize coefficient function
      - Update coefficient probability function
      - RD
      - Entropy stats
      - 16x16 is a config option
      
      Have not tested with experiments.
      
      hd:     2.60%
      std-hd: 2.43%
      yt:     1.32%
      derf:   0.60%
      
      Change-Id: I96fb090517c30c5da84bad4fae602c3ec0c58b1c
      fed8a183
  15. 17 Jul, 2012 1 commit
  16. 19 Jun, 2012 1 commit
  17. 15 Jun, 2012 1 commit
    • Deb Mukherjee's avatar
      Adaptive entropy coding of coefficients, modes, mv. · 1fe85a35
      Deb Mukherjee authored
      This patch incorporates adaptive entropy coding of coefficient tokens,
      and mode/mv information based on distributions encountered in a frame.
      Specifically, there is an initial forward update to the probabilities
      in the bitstream as before for coding the symbols in the frame, however
      at the end of decoding each frame, the forward update to the
      probabilities is reverted and instead the probabilities are updated
      towards the actual distributions encountered within the frame.
      The amount of update is weighted by the number of hits within each
      context.
      
      Results on derf/hd/std-hd are all up by 1.6%.
      
      On derf, the most of the gains come from coefficients, however for the
      hd and std-hd sets, the most of the gains come from the mode/mv
      information updates.
      
      Change-Id: I708c0e11fdacafee04940fe7ae159ba6844005fd
      1fe85a35
  18. 04 May, 2012 1 commit
    • Attila Nagy's avatar
      Make global data const · f039a85f
      Attila Nagy authored
      Removes all runtime initialization of global data. This commit is a
      squashed version of the following series cherry-picked from master.
      This is necessary because of a change that was merged to the tester
      that depends on the scaler being moved to the RTCD framework, which
      is a worthwhile thing to include in Eider anyway.
      
        - a91b42f0 Makes all global data in entropy.c const
        - b35a0db0 Makes all global data in tokenize.c const
        - 441cac8e Makes all mode token tables const
        - 5948a021 Ports vpx_xcaler to new RTCD method
        - 317d4244 Makes all mode token tables const part 2
      
      Change-Id: Ifeaea24df2b731e7c509fa6c6ef6891a374afc26
      f039a85f
  19. 26 Apr, 2012 1 commit
    • Attila Nagy's avatar
      Moves error concealment allocations from common parts to decoder · 24e7b1b9
      Attila Nagy authored
      The backup MODE_INFO buffer used in the error concealment was
      allocated in the codec common parts allocation even though this is a
      decoder only resource. Moved the allocation to the decoder side.
      No need to update_mode_info_border as mode_info buffers are zero
      allocated.
      
      This fixes also a potential memory leak as the EC overlaps buffer was not
      properly released before reallocation after a frame size change.
      
      Change-Id: I12803d3e012308d95669069980b1c95973fb775f
      24e7b1b9
  20. 25 Apr, 2012 1 commit
    • Yaowu Xu's avatar
      Merge QIMODE experiment · a16608ab
      Yaowu Xu authored
      This commit merge the QI mode experiment. As the experiment affects
      the encoding of intra coding modes on key frame only, the overall
      effect of the experiment on encoding tests is insignificant.
      
      Change-Id: I9e4e3933adface88867ad429cee3986e529c511d
      a16608ab
  21. 19 Apr, 2012 1 commit
    • Attila Nagy's avatar
      Makes all mode token tables const · 441cac8e
      Attila Nagy authored
      Mode token tabels precalculated in entropymode.c.
      Removes vp8_initialize_common()as all common global data
      is precalculated const now.
      
      Change-Id: I9b2ccc883e4f618069e1bc180dad3a823394eb73
      441cac8e
  22. 17 Apr, 2012 1 commit
    • Attila Nagy's avatar
      Makes all global data in entropy.c const · a91b42f0
      Attila Nagy authored
      Removes all runtime initialization of global data in entropy.c.
      Precalculated values are used for initializing all entropy related
      tabels.
      
      First patch in a series to make sure code is reentrant.
      
      Change-Id: I9aac91a2a26f96d73c6470d772a343df63bfe633
      a91b42f0
  23. 23 Mar, 2012 1 commit
  24. 22 Mar, 2012 1 commit
    • Deb Mukherjee's avatar
      Miscellaneous changes in mfqe and postproc modules · 66ba79f5
      Deb Mukherjee authored
      Adds logic to disable mfqe for the first frame after a configuration
      change such as change in resolution. Also adds some missing
      if CONFIG_POSTPROC macro checks.
      
      Change-Id: If29053dad50b676bd29189ab7f9fe250eb5d30b3
      66ba79f5
  25. 15 Mar, 2012 1 commit
    • Yaowu Xu's avatar
      WebM Experimental Codec Branch Snapshot · 6035da54
      Yaowu Xu authored
      This is a code snapshot of experimental work currently ongoing for a
      next-generation codec.
      
      The codebase has been cut down considerably from the libvpx baseline.
      For example, we are currently only supporting VBR 2-pass rate control
      and have removed most of the code relating to coding speed, threading,
      error resilience, partitions and various other features.  This is in
      part to make the codebase easier to work on and experiment with, but
      also because we want to have an open discussion about how the bitstream
      will be structured and partitioned and not have that conversation
      constrained by past work.
      
      Our basic working pattern has been to initially encapsulate experiments
      using configure options linked to #IF CONFIG_XXX statements in the
      code. Once experiments have matured and we are reasonably happy that
      they give benefit and can be merged without breaking other experiments,
      we remove the conditional compile statements and merge them in.
      
      Current changes include:
      * Temporal coding experiment for segments (though still only 4 max, it
        will likely be increased).
      * Segment feature experiment - to allow various bits of information to
        be coded at the segment level. Features tested so far include mode
        and reference frame information, limiting end of block offset and
        transform size, alongside Q and loop filter parameters, but this set
        is very fluid.
      * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used
        in MBs using 16x16 prediction modes within inter frames.
      * Compound prediction (combination of signals from existing predictors
        to create a new predictor).
      * 8 tap interpolation filters and 1/8th pel motion vectors.
      * Loop filter modifications.
      * Various entropy modifications and changes to how entropy contexts and
        updates are handled.
      * Extended quantizer range matched to transform precision improvements.
      
      There are also ongoing further experiments that we hope to merge in the
      near future: For example, coding of motion and other aspects of the
      prediction signal to better support larger image formats, use of larger
      block sizes (e.g. 32x32 and up) and lossless non-transform based coding
      options (especially for key frames). It is our hope that we will be
      able to make regular updates and we will warmly welcome community
      contributions.
      
      Please be warned that, at this stage, the codebase is currently slower
      than VP8 stable branch as most new code has not been optimized, and
      even the 'C' has been deliberately written to be simple and obvious,
      not fast.
      
      The following graphs have the initial test results, numbers in the
      tables measure the compression improvement in terms of percentage. The
      build has  the following optional experiments configured:
      --enable-experimental --enable-enhanced_interp --enable-uvintra
      --enable-high_precision_mv --enable-sixteenth_subpel_uv
      
      CIF Size clips:
      http://getwebm.org/tmp/cif/
      HD size clips:
      http://getwebm.org/tmp/hd/
      (stable_20120309 represents encoding results of WebM master branch
      build as of commit#7a159071)
      
      They were encoded using the following encode parameters:
      --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63
      --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999
      --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50
      --minsection-pct=0 --maxsection-pct=800 --sharpness=0
      --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF)
      --arnr-type=3
      
      Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
      6035da54
  26. 13 Mar, 2012 1 commit
  27. 01 Mar, 2012 1 commit
  28. 29 Feb, 2012 1 commit
  29. 28 Feb, 2012 1 commit
    • Paul Wilkins's avatar
      Code Simplification · b6f02c85
      Paul Wilkins authored
      Removal of code relating to token partitioning
      
      Change-Id: Iaf3c88d6758639a55bd92c3be5c51e6bed407a3c
      b6f02c85
  30. 16 Feb, 2012 1 commit
    • Paul Wilkins's avatar
      Code simplification · 79d330d7
      Paul Wilkins authored
      Removal of the pickinter.c and .h files and calls to this
      code.
      
      Removal of some code relating to real time and one pass
      settings  though there is more to be done in this regard.
      
      However,  vp8_set_speed_features() now
      only supports modes 0 and 1 and speeds up to 3
      so rd should always be set.
      
      Change-Id: I62c0c1b6154ab499785baef310536080e87bc4d8
      79d330d7
  31. 15 Feb, 2012 1 commit
  32. 10 Feb, 2012 2 commits
    • Ronald S. Bultje's avatar
      Improved coding using 8x8 transform · f64725a0
      Ronald S. Bultje authored
      In summary, this commit encompasses a series of changes in attempt to
      improve the 8x8 transform based coding to help overall compression
      quality, please refer to the detailed commit history below for what
      are the rationale underly the series of changes:
      
      a. A frame level flag to indicate if 8x8 transform is used at all.
      b. 8x8 transform is not used for key frames and small image size.
      c. On inter coded frame, macroblocks using modes B_PRED, SPLIT_MV
      and I8X8_PRED are forced to using 4x4 transform based coding, the
      rest uses 8x8 transform based coding.
      d. Encoder and decoder has the same assumption on the relationship
      between prediction modes and transform size, therefore no signaling
      is encoded in bitstream.
      e. Mode decision process now calculate the rate and distortion scores
      using their respective transforms.
      
      Overall test results:
      1. HD set
      http://www.corp.google.com/~yaowu/no_crawl/t8x8/HD_t8x8_20120206.html
      (avg psnr: 3.09% glb psnr: 3.22%, ssim: 3.90%)
      2. Cif set:
      http://www.corp.google.com/~yaowu/no_crawl/t8x8/cif_t8x8_20120206.html
      (avg psnr: -0.03%, glb psnr: -0.02%, ssim: -0.04%)
      It should be noted here, as 8x8 transform coding itself is disabled
      for cif size clips, the 0.03% loss is purely from the 1 bit/frame
      flag overhead on if 8x8 transform is used or not for the frame.
      
      ---patch history for future reference---
      Patch 1:
      this commit tries to select transform size based on macroblock
      prediction mode. If the size of a prediction mode is 16x16, then
      the macroblock is forced to use 8x8 transform. If the prediction
      mode is B_PRED, SPLITMV or I8X8_PRED, then the macroblock is forced
      to use 4x4 transform. Tests on the following HD clips showed mixed
      results: (all hd clips only used first 100 frames in the test)
      
      http://www.corp.google.com/~yaowu/no_crawl/t8x8/hdmodebased8x8.html
      http://www.corp.google.com/~yaowu/no_crawl/t8x8/hdmodebased8x8_log.html
      
      while the results are mixed and overall negative, it is interesting to
      see 8x8 helped a few of the clips.
      
      Patch 2:
      this patch tries to hard-wire selection of transform size based on
      prediction modes without using segmentation to signal the transform size.
      encoder and decoder both takes the same assumption that all macroblocks
      use 8x8 transform except when prediciton mode is B_PRED, I8X8_PRED or
      SPLITMV. Test results are as follows:
      
      http://www.corp.google.com/~yaowu/no_crawl/t8x8/cifmodebase8x8_0125.html
      http://www.corp.google.com/~yaowu/no_crawl/t8x8/hdmodebased8x8_0125log.html
      
      Interestingly, by removing the overhead or coding the segmentation, the
      results on this limited HD set have turn positive on average.
      
      Patch 3:
      this patch disabled the usage of 8x8 transform on key frames, and kept the
      logic from patch 2 for inter frames only. test results on HD set turned
      decidedly positive with 8x8 transform enabled on inter frame with 16x16
      prediction modes: (avg psnr: .81% glb psnr: .82 ssim: .55%)
      
      http://www.corp.google.com/~yaowu/no_crawl/t8x8/hdintermode8x8_0125.html
      results on cif set still negative overall
      
      Patch 4:
      continued from last patch, but now in mode decision process, the rate and
      distortion estimates are computed based on 8x8 transform results for MBs
      with modes associated with 8x8 transform. This patch also fixed a problem
      related to segment based eob coding when 8x8 transform is used. The patch
      significantly improved the results on HD clips:
      
      http://www.corp.google.com/~yaowu/no_crawl/t8x8/hd8x8RDintermode.html
      (avg psnr: 2.70% glb psnr: 2.76% ssim: 3.34%)
      results on cif also improved, though they are still negative compared to
      baseline that uses 4x4 transform only:
      http://www.corp.google.com/~yaowu/no_crawl/t8x8/cif8x8RDintermode.html
      (avg psnr: -.78% glb psnr: -.86% ssim: -.19%)
      
      Patch 5:
      This patch does 3 things:
      a. a bunch of decoder bug fixes, encodings and decodings were verified
      to have matched recon buffer on a number of encodes on cif size mobile and
      hd version of _pedestrian.
      b. the patch further improved the rate distortion calculation of MBS that
      use 8x8 transform. This provided some further gain on compression.
      c. the patch also got the experimental work SEG_LVL_EOB to work with 8x8
      transformed macroblock, test results indicates it improves the cif set
      but hurt the HD set slightly.
      
      Tests results on HD clips:
      http://www.corp.google.com/~yaowu/no_crawl/t8x8/HD_t8x8_20120201.html
      (avg psnr: 3.19% glb psnr: 3.30% ssim: 3.93%)
      
      Test results on cif clips:
      http://www.corp.google.com/~yaowu/no_crawl/t8x8/cif_t8x8_20120201.html
      (avg psnr: -.47% glb psnr: -.51% ssim: +.28%)
      
      Patch 6:
      Added a frame level flag to indicate if 8x8 transform is allowed at all.
      temporarily the decision is based on frame size, can be optimized later
      one. This get the cif results to basically unchanged, with one bit per
      frame overhead on both cif and hd clips.
      
      Patch 8:
      Rebase and Merge to head by PGW.
      Fixed some suspect 4s that look like hey should be 64s in regard
      to segmented EOB. Perhaps #defines would be bette.
      Bulit and tested without T8x8 enabled and produces unchanged
      output.
      
      Patch 9:
      Corrected misalligned code/decode of "txfm_mode" bit.
      Limited testing for correct encode and decode with
      T8x8 configured on derf clips.
      
      Change-Id: I156e1405d25f81579d579dff8ab9af53944ec49c
      f64725a0
    • Ronald S. Bultje's avatar
      Merge dualpred (compound prediction) experiment. · 29e4d7e8
      Ronald S. Bultje authored
      Change-Id: Ieaaa07c50eae41118596197f6a4d848135946e41
      29e4d7e8
  33. 06 Feb, 2012 1 commit
    • Paul Wilkins's avatar
      Merged NEWNEAR experiment · 9c9300f5
      Paul Wilkins authored
      This commit merges the NEWNEAR experiment such that it
      is effectively always on.
      
      The fact that there were changes in the threading code again
      highlights the need to strip out such features during the
      bitstream development phase as trying to maintain this code
      (especially as it is not being tested) slows the development cycle.
      
      Change-Id: I8b34950a1333231ced9928aa11cd6d6459984b65
      9c9300f5