Change-Id: Iec41736c2b6140715f90f40de5ae6cf52497a9b8

Code intra/inter, then comp/single, then the ref frame selection.
Use contextualization for all steps. Don't code two past frames
in comp pred mode.

Change-Id: I4639a78cd5cccb283023265dbcc07898c3e7cf95

Change-Id: Ib557cc6351404b9e178e95a545883eb3666f11f0

It remains as a local define in rdopt.c so we can distinguish between
split and non-split modes in the RD loop, but disappears outside that
scope in the codec.

Change-Id: I98c18fe5ab7e4fbd1d6620ec5695e2ea20513ce9

This code is no longer needed for correct intra prediction.

Change-Id: I822d1a8b0ad0a00e7c4c6e7b2931790c39d1267d

Adds a subsampling aware border extension function. This may be reworked
soon to support more than 3 planes.

Change-Id: I76b81901ad10bb1e678dd4f0d22740ca6c76c43b

Always initialize the mode_info with sb_type of BLOCK_SIZE_MB16X16
for the first-pass encoding test.

Change-Id: Ic86393eeef981bdd523a5b44cfac3f0b24c068b7

Make framebuffer allocations according to the chroma subsamping
factors in use. A bit is placed in the raw part of the frame header for
each of the two subsampling factors. This will be moved in a future
commit to make them part of the TBD feature set bits, probably only set
on keyframes, etc.

Change-Id: I59ed38d3a3c0d4af3c7c277617de28d04a001853

The chroma planes are not used during the first pass encode,
but the vp9_encode_sb() function was operating on them anyway.
This was causing the use of uninitialized memory.

Change-Id: I5ebafcd3d5e34ed91a8336dad159b573995a939f

Change-Id: Ia2814402e3c2ec97c24c536c05f0f526fe1a431c

Adding static swap_yv12 function to vp9_firstpass.c.

Change-Id: I7da9caab9720498db4a74c627901bf37816ed06c

Pull sb8x8 out of experimental list. verified via borg run tests.
Fixed unit test failures.

Change-Id: I12a4bbd17395930580c048ab68becad1ffe46e76

There is only one instance of these structures, no need for them
to be allocated separately on the heap.

Change-Id: I1333cc92d06bbe21be643c2b2f0e3936f0264cac

This setup is now handled by vp9_build_intra_predictors()
when left_available and/or up_available is zero.

Change-Id: I59cec0ab95f8be69ce885fd20727510e4deef8a0

Creates a common encode (subtract, transform, quantize, optimize,
inverse transform, reconstruct) function for all sb sizes, including
the old 16x16 path.

Change-Id: I964dff1ea7a0a5c378046a069ad83495f54df007

Change-Id: I087e08e7909a406b71715b8525c104208daa6889

All members can be referenced from their per-plane counterparts, and
removes assumptions about 24 blocks per macroblock.

Change-Id: I7ff2fa72d22c29163eb558981c8193765a8113d9

Access these members from MACROBLOCKD instead.

Change-Id: I2574622e577bb9feede47f6b7ccbb11f3e928ca8

All members can be referenced from their per-plane counterparts, and
removes assumptions about 24 blocks per macroblock.

Change-Id: I593fb0715e74cd84b48facd1c9b18c3ae1185d4b

Function set_mb_row() and set_mb_col() do similar work and are always
called together, this commit merged them into a single function for
clarity and easy maintainence.  This was a TODO item.

Change-Id: I956bd9ed6afb8b2b0469b20fd8bc893b26f8a0f3

Lookup the data per-plane from the MACROBLOCK struct.

Change-Id: I9253c4d3cf886aa9ab4aeab23a2156bfcf994ede

Continue moving framebuffers to per-plane data.

Change-Id: I237e5a998b364c4ec20316e7249206c0bff8631a

First in a series of commits moving the framebuffers pointers to
per-plane data, so that they can be indexed numerically rather than
by name.

Change-Id: I6e0d60fd4d51e6375c384eb7321776564df21775

Adjustments take heavier account of the frame near a kf
in deciding boost and limit the total number that can contribute.
Also adjusted the minq calculations such that in most cases we
generate a smaller key frame.
Modified the code that accounts for how static the sequence is and
added some adjustment based on image size. This is still very
crude but smaller images tend to behave better with a larger
delta between KF Q and other frames than larger image formats.
Changes give sizable gains in overall PSNR  on all the test sets but the
biggest gains (~3%) were on the std-hd set.
The gains were smaller for SSIM but still significant.
Average PSNR results are mixed because this metric can very easily
be altered by having a very good / lossless coding of one or two frames.
Some of the YT and YT-HD clips in particular have blank lead ins and
allowing lossless coding of these appears to make a big difference to
average PSNR but it reality does not help much at all.

Change-Id: I6bfe485a1d330b47c783832f1717c95c535464ec

This commit converts the luma versions of vp9_build_inter_predictors_sb
to use a common function. Update the convolution functions to support
block sizes larger than 16x16, and add a foreach_predicted_block walker.

Next step will be to calculate the UV motion vector and implement SBUV,
then fold in vp9_build_inter16x16_predictors_mb and SPLITMV.

At the 16x16, 32x32, and 64x64 levels implemented in this commit, each
plane is predicted with only a single call to vp9_build_inter_predictor.
This is not yet called for SPLITMV. If the notion of SPLITMV/I8X8/I4X4
goes away, then the prediction block walker can go away, since we'll
always predict the whole bsize in a single step. Implemented using a
block walker at this stage for SPLITMV, as a 4x4 "prediction block size"
within the BLOCK_SIZE_MB16X16 macroblock. It would also support other
rectangular sizes too, if the blocks smaller than 16x16 remain
implemented as a SPLITMV-like thing. Just using 4x4 for now.

There's also a potential to combine with the foreach_transformed_block
walker if the logic for calculating the size of the subsampled
transform is made more straightforward, perhaps as a consequence of
supporing smaller macroblocks than 16x16. Will watch what happens there.

Change-Id: Iddd9973398542216601b630c628b9b7fdee33fe2

alt_extra_bits is now only used in a local context so
remove it from the twopass_rc structure.

Change-Id: I5bbf0a3dba9712a3da45760f7bb865243705b53e

This function is now called from configures the ARNR
filter so it belongs with the other temporal filter
functions.

Change-Id: I64211875918364b5b8edfb97743e573c6def1663

Normalization of the frame boost value was being done
when it reached the value 1028. The intention was to
keep to a range of 10 bits, so it should have been
clipped above 1023.

Change-Id: I0afdddc1d2eb9e7822ec4578903cbe6ec0b33b91

New names are y_dc_delta_q, uv_dc_delta_q, uv_ac_delta_q.

Change-Id: I4acae1fc23a4697ce2c5a5becb8dc28ef0a4b552

Using regular 0 and 1 constants now.

Change-Id: Ie763503cbb727847cc8f1d6506cd6f2ee607f056

This is work-in-progress, it implements multiple ARF
encoding behind an experimental flag.

It adds the ability to insert multiple ARF frames into a
single ARF group. This patch implements the reordering
of the coded frames, and implements a fixed-length coding
pattern. It applies a fixed quantizer strategy based on
where the frame is in the coding sequence.

Further work to modify the rate control strategy is
ongoing and will be submitted via a set of future patches.

In this first step, each ARF group is recursively
bisected and an ARF frame added at that position in the
sequence. The recursion continues until ARF frames are
within MIN_GF_INTERVAL frames.

The code sits behind the "multiple-arf" experimental
flag ("CONFIG_MULTIPLE_ARF"). The experimental flag
"oneshotq" ("CONFIG_ONESHOTQ") also needs to be enabled
for this patch to work correctly.

Change-Id: Ie473b05ebb43ac473c0cfb659b2b8042823085e2

This threshold effectively limits the amount of motion
from one end of a GF/ARF group to the other.
This patch makes the threshold depend on image size.

Change-Id: Id45d1d7bced815f86ddd037be53164894b00b82f

Renaming Width to width, Height to height and Version to version in
several structs and function signatures.

Change-Id: I084c3f7e747cb2ce3345aff27a3dff9b13a87543

Adjust the filter length and strength for each
ARF group based on a measure of difficulty (the boost)
and the active q range.

Remove lower limit on RDMULT value.

Average gains on the different sets in range 0.4%-0.9%.
However the ARNR changes give a very big boost on a
few clips.

Eg. Soccer ~5%, in derf set and Cyclist ~ 10% in the std-hd set

Change-Id: I2078d78798e27ad2bcc2b32d703ea37b67412ec4

If the second reference is better than the first in the long term,
it was possible to try to take the fractional exponent of a
negative number, giving an undefined result.

Change-Id: I1dd08286747ceae960eb03bb5d98a383cc9d253b

This patch puts in an adjustment to the maximum gf/arf
interval based on the active q range.  It sets a fixed
baseline maximum of 16 but can drop this down to 12 at
lower q. This required some re-ordering in the first pass
code to insure we have a Q range estimate before defining
the first gf sequence.

The main gains seed are int he STD hd set on 50fps clips
where previously the interval could rise as high as 25.
On the std hd clip the gains are around 2.8% with limit set
to 300 frames.

When combined with the one shot rate control flags we get
combined of:

derf 1.55% (limit300), yt 7.25%, hd 5.17% std-hd 5.84% (limit300)

Change-Id: Ib380d51354511f2ff0f171a8df4e74291c0421f9

Increase the motion search range by 4x. Change MV_CLASS tree of the
entropy coding to allow two additional mv classes to cover the
extended motion vector limit. The codec determines the effective
motion search range conditioned on the actual frame dimension.

It provides coding gains:

stdhd 0.39%
yt    0.56%
hd    0.47%

Major coding performance gains are packed in several sequences with
intense motion activities, e.g., ped_1080p gains 7% at high bit-rates,
and on average 3%.

TODO: Need to further tune the rate control and motion search units.

Change-Id: Ib842540a6796fbee5a797809433ef6a477c6d78d

gf_group_bits is int64_t remove casts to int.

Change-Id: I3b4225905041fac9af9fdfcbcb6f1c357ea4b593

This patch makes the encoder's use of ref_frame_map and active_ref_idx
consistent with the decoder. ref_frame_map[] maps a reference buffer
index to its actual location in the yv12_fb array, since many
references may share an underlying buffer. active_ref_idx[] mirrors
cpi->{lst,gld,alt}_fb_idx, holding the active references in each
slot.

This also fixes a bug in setup_buffer_inter() where the incorrect
reference was used to populate the scaling factors.

Change-Id: Id3728f6d77cffcd27c248903bf51f9c3e594287e

This patch allows coding frames using references of different
resolution, in ZEROMV mode. For compound prediction, either
reference may be scaled.

To test, I use the resize_test and enable WRITE_RECON_BUFFER
in vp9_onyxd_if.c. It's also useful to apply this patch to
test/i420_video_source.h:

  --- a/test/i420_video_source.h
  +++ b/test/i420_video_source.h
  @@ -93,6 +93,7 @@ class I420VideoSource : public VideoSource {

     virtual void FillFrame() {
       // Read a frame from input_file.
  +    if (frame_ != 3)
       if (fread(img_->img_data, raw_sz_, 1, input_file_) == 0) {
         limit_ = frame_;
       }

This forces the frame that the resolution changes on to be coded
with no motion, only scaling, and improves the quality of the
result.

Change-Id: I1ee75d19a437ff801192f767fd02a36bcbd1d496