GitLab

Fix code for following warnings:
-Wimplicit-function-declaration
-Wuninitialized
-Wunused-but-set-variable
-Wunused-variable

Change-Id: I2be434f22fdecb903198e8b0711255b4c1a2947a

Race was introduced by https://gerrit.chromium.org/gerrit/15563.

If loopfilter related config params were changed between frames, or
after a KEY frame, there could be a mismatch between encoder's and
decoder's recontructed image. In worst case, when frame buffers are
reallocated because of a size change, the loopfilter could
do an invalid data access (segmentation fault).

Fixes:
Sync with the loopfilter before applying any encoder changes in
vp8_change_config().
Moved the loopfilter synching to the top of
encode_frame_to_data_rate() so that it's done before any alteration of
the encoder.

Change-Id: Ide5245d2a2aeed78752de750c0110bc4b46f5b7b

Look for changes in the codec's configured w/h instead of its active
w/h when forcing keyframes. Otherwise calls to vp8_change_config()
will force a keyframe when spatial resampling is active.

Change-Id: Ie0d20e70507004e714ad40b640aa5b434251eb32

When producing an invisible ARF, the time stamp counters aren't
updated since the last time stamp is seen by the codec twice. The
prior code was trapping this case with refresh_alt_ref, but this isn't
correct for other uses of the ARF. Instead, use the show_frame flag.

Change-Id: If67fff7c6c66a3606698e34e2fb5731f56b4a223

Adds logic to disable mfqe for the first frame after a configuration
change such as change in resolution. Also adds some missing
if CONFIG_POSTPROC macro checks.

Change-Id: If29053dad50b676bd29189ab7f9fe250eb5d30b3

Added back a vpx_free call that was mistakenly removed.

Change-Id: Ib662933a8697a4efb8534b5b9b762ee6c2777459

This change added a motion search skipping mechanism similar
to what we did in second pass. For a macroblock that is very
similar to the macroblock at same location on last frame,
we can set its mv to be zero, and skip motion search. This
improves first-pass performance for slide shows and video
conferencing clips with a slight PSNR loss.

Change-Id: Ic73f9ef5604270ddd6d433170091d20361dfe229

Some refactoring in rdopt.c and pickinter.c.

Change-Id: I4f50020eb3313c37f4d441d708fedcaf219d3038

Produce the token partitions on-the-fly, while processing each MB.
Context is updated at the beginning of each frame based on the
previoud frame's counters. Optimally encoder outputs partitions in
separate buffers. For frame based output, partitions are concatenated
internally.

Limitations:
    - enabled just in combination with realtime-only mode
    - number of encoding threads has to be equal or less than the
    number of token partitions. For this reason, by default the encoder
    will do 8 token partitions.
    - vpxenc supports partition output (-P) just in combination with
    IVF output format (--ivf)

Performance:
    - Realtime encoder can be up to 13% faster (ARM) depending on the number
    of threads and bitrate settings. Constant gain over the 5-16 speed
    range.
    - Token buffer reduced from one frame to 8 MBs

Quality:
    - quality is affected by the delayed context updates. This again
    dependents on input material, speed and bitrate settings. For VC
    style input the loss seen is up to 0.2dB. If error-resilient=2
    mode is used than the effect of this change is negligible.

Example:
./configure --enable-realtime-only --enable-onthefly-bitpacking
./vpxenc --rt --end-usage=1 --fps=30000/1000 -w 640 -h 480
--target-bitrate=1000 --token-parts=3 --static-thresh=2000
--ivf -P -t 4 -o strm.ivf tanya_640x480.yuv

Change-Id: I127295cb85b835fc287e1c0201a67e378d025d76

use oxcf instead of common in check to Reinit the
lookahead buffer if the frame size changes
prior behavior would cause assertion fail/crash

first observed in:
support changing resolution with vpx_codec_enc_config_set

Change-Id: Ib669916ca9b4f206d4cc3caab5107e49d39a36aa

Second shot at this...

Sync with loopfilter thread as late as possible, usually just at the
beginning of next frame encoding. This returns control to application
faster and allows a better multicore scaling.

When PSNR packets are generated the final filtered frame is needed
imediatly so we cannot delay the sync. Same has to be done when
internal frame is previewed.

Change-Id: I64e110c8b224dd967faefffd9c93dd8dbad4a5b5

Reduced by 4080 bytes.

Change-Id: I037b55bc9684bf4a54bce238be00e8c4db3f643e

Allow the application to change the frame size during encoding. This
is only supported when not using lagged compress.

Change-Id: I89b585d703d5fd728a9e3dedf997f1b595d0db0f

This is the final commit in the series converting to the new RTCD
system. It removes the encoder csystemdependent files and the remaining
global function pointers that didn't conform to the old RTCD system.

Change-Id: I9649706f1bb89f0cbf431ab0e3e7552d37be4d8e

This commit continues the process of converting to the new RTCD
system. It removes the last of the VP8_ENCODER_RTCD struct references.

Change-Id: I2a44f52d7cccf5177e1ca98a028ead570d045395

This commit continues the process of converting to the new RTCD
system.

Change-Id: Ia5828b7ecc80db55b21916704aa3d54cbb98f625

This commit continues the process of converting to the new RTCD
system.

Change-Id: Iba9df4c03a508e51c37201c621be43523fae87d9

This commit continues the process of converting to the new RTCD
system.

Change-Id: I3f9c07db65eb206f6363d21bdb80e871570da767

This commit continues the process of converting to the new RTCD
system.

Change-Id: Ie5c1aa480637e98dc3918fb562ff45c37a66c538

This commit continues the process of converting to the new RTCD
system.

Change-Id: I6c519ab61e4f4e0ebcc796f2df061f945c48cefe

This commit continues the process of converting to the new RTCD
system.

Change-Id: If54eb5cb5d1b0cac6c4c0633a9e99c93ca860ba2

This is a proof of concept RTCD implementation to replace the current
system of nested includes, prototypes, INVOKE macros, etc. Currently
only the decoder specific functions are implemented in the new system.
Additional functions will be added in subsequent commits.

Overview:
  RTCD "functions" are implemented as either a global function pointer
  or a macro (when only one eligible specialization available).
  Functions which have RTCD specializations are listed using a simple
  DSL identifying the function's base name, its prototype, and the
  architecture extensions that specializations are available for.

Advantages over the old system:
  - No INVOKE macros. A call to an RTCD function looks like an ordinary
    function call.
  - No need to pass vtables around.
  - If there is only one eligible function to call, the function is
    called directly, rather than indirecting through a function pointer.
  - Supports the notion of "required" extensions, so in combination with
    the above, on x86_64 if the best function available is sse2 or lower
    it will be called directly, since all x86_64 platforms implement
    sse2.
  - Elides all references to functions which will never be called, which
    could reduce binary size. For example if sse2 is required and there
    are both mmx and sse2 implementations of a certain function, the
    code will have no link time references to the mmx code.
  - Significantly easier to add a new function, just one file to edit.

Disadvantages:
  - Requires global writable data (though this is not a new requirement)
  - 1 new generated source file.

Change-Id: Iae6edab65315f79c168485c96872641c5aa09d55

This commit is incomplete, as it does not synchronize the loop filter
before returning a handle to the reconstructed frame in
vpx_codec_get_preview_frame(), which can cause (false?) failures
when running the test_reconstruct_buffer test.

This may be related to a bug that does cause visible artifacts, which
is also under investigation.

This reverts commit 380d64ec.

Change-Id: Iad710941e7731d44fc2bde63bc63d6763cc4629e

A processor with ARMv7 instructions does not
necessarily have NEON dsp extensions.  This CL
has the added side effect of allowing the ability
to enable/disable the dsp extensions cleanly.

Change-Id: Ie1e879b8fe131885bc3d4138a0acc9ffe73a36df

Separated a double assignment that looked suspiciously like an
assignment and equality typo.

Change-Id: I7813979e9d7ea2539afb3c8ae6074f9df5ebdf52

When running multi-layer (ML) encodes and dynamically
changing coding parameters on the fly (e.g. frame
duration/rate, bandwidths allocated to each layer)
the encoder would not produce sensible output.

In certain cases the rate targeting would be
hideously inaccurate.

These fixes make it possible to change these coding
parameters correctly and to maintain accurate control
of the rate targeting.

I also added the specification of the input timebase
into the test program, vp8_scalable_patterns.c.

Patch 2: Moved declaration to appease MS compiler)

Change-Id: Ic8bb5a16daa924bb64974e740696e040d07ae363

The code had a number of constructs like (condition)?1:0,
which is redundant with C's semantics. In the cases where a boolean
operator was used in the condition, simply remove the ternary part.
Otherwise adjust the surrounding expression to remove the condition
(eg, for rounding up. See pickinter.c and rdopt.c)

Change-Id: Icb2372defa3783cf31857d90b2630d06b2c7e1be

Remove BOOL, INTn, UINTn, etc, in favor of C99-style fixed width
types.

Change-Id: I396636212fb5edd6b347d43cc940186d8cd1e7b5

Mostly cosmetic. Trying for a more compact representation of speed
selection thresholds.

Change-Id: I339e7840049b91ad569aabbdc9c702a496110d3b

Mostly cosmetic. Trying for a more compact representation of speed
selection thresholds.

Change-Id: Icaebea632c7bb71ca8e07b4def04a046d4515e27

This file declared a bunch of nonexistent, unreferenced global
function pointers.

Change-Id: Ic26bb8c7712deba754c49fc01f383b53afc9e728

Change-Id: Ifc64cf990ae04d77934da3324d0afb3993f061e7

Use an opaque struct rather than typecasting through VP8_PTR, an int*.

Change-Id: I5ed4d9238ba2e8d51bfa07a8da87a2eb4c8fa43a

The total_stats, this_frame_stats, and total_left_stats structures
were previously create by a heap allocation, despite being of fixed
size. These structures were allocated and deallocated during
{de,}allocate_compressor_data, which is reinvoked whenever the frame
size changes. Unfortunately, this clobbers the total_stats and
total_left_stats data.

Historically, these were variable size at one time, due to the first
pass motion map, which necessitated their being created by a unique
heap allocation. However, this bug with the total_stats being
clobbered has probably been present since that initial implementation.

These structures are instead moved to be stored within the struct
twopass_rc directly, rather than being heap allocated separately.

Change-Id: I7f9e519e25c58b92969071f0e99fa80307e0682b

...regardless of the speed settings.

Change-Id: I4b91ac7a7208efd690dfc69e175f8eb769b6ce03

Change-Id: I4168eb6ea22ae541471738a7a3453e7d52059275

Do the test filtering in the existing backup frame buffer instead of
the original. Copy the original data into extra buffer before doing
the  filtering. This way there is no need to restore the original
unfiltered  frame at the end of level picking process.

This came up in some discussions with Johann. Thanks!

Change-Id: I495f4301d983854673276c34ec0ddf9a9d622122

The example encoder down-samples the input video frames a number of
times with a down-sampling factor, and then encodes and outputs
bitstreams with different resolutions.

Support arbitrary down-sampling factor, and down-sampling factor
can be different for each encoding level.

For example, the encoder can be tested as follows.
1. Configure with multi-resolution encoding enabled:
../libvpx/configure --target=x86-linux-gcc --disable-codecs
--enable-vp8 --enable-runtime_cpu_detect --enable-debug
--disable-install-docs --enable-error-concealment
--enable-multi-res-encoding
2. Run make
3. Encode:
If input video is 1280x720, run:
./vp8_multi_resolution_encoder 1280 720 input.yuv 1.ivf 2.ivf 3.ivf 1
(output: 1.ivf(1280x720); 2.ivf(640x360); 3.ivf(320x180).
The last parameter is set to 1/0 to show/not show PSNR.)
4. Decode:
./simple_decoder 1.ivf 1.yuv
./simple_decoder 2.ivf 2.yuv
./simple_decoder 3.ivf 3.yuv
5. View video:
mplayer 1.yuv -demuxer rawvideo -rawvideo w=1280:h=720 -loop 0 -fps 30
mplayer 2.yuv -demuxer rawvideo -rawvideo w=640:h=360 -loop 0 -fps 30
mplayer 3.yuv -demuxer rawvideo -rawvideo w=320:h=180 -loop 0 -fps 30

The encoding parameters can be modified in vp8_multi_resolution_encoder.c,
for example, target bitrate, frame rate...

Modified API. John helped a lot with that. Thanks!

Change-Id: I03be9a51167eddf94399f92d269599fb3f3d54f5

API was not returning correct partition sizes on arm targets.
The armv5 token packing functions were not storing the information to the
partition size table.
As a fix, have one boolcoder instance allocated for each partition so
that partition sizes are internally available after all partitions
were encoded. This will also allow more flexibility in producing
several partitions in parallel.

Use buffer validation (overflow check) in all ARM bitpacking
functions.

Change-Id: I31c8a11d8a7613676f0ff50928cb2a2ab14fd169

There was an implicit reference frame test order (typically LAST,
GOLD, ARF) in the mode selection logic, but this doesn't provide the
expected results when some reference frames are disabled. For
instance, in real-time mode, the speed selection logic often disables
the ARF modes. So if the user disables the LAST and GOLD frames, the
encoder was always choosing INTRA, when in reality searching the ARF
in this case has the same speed penalty as searching LAST would have
had.

Instead, introduce the notion of a reference frame search order. This
patch preserves the former priorities, so if a frame is disabled, the
other frames bump up a slot to take its place. This patch lays the
groundwork for doing something smarter in the frame test order, for
example considering temporal distance or looking at the frames used by
nearby blocks.

Change-Id: I1199149f8662a408537c653d2c021c7f1d29a700