GitLab

This change is a fix / extension of the newbestrefmv
experiment. As such it is presented without IFDEF.

The change creates a new context for coding inter modes
in vp9_find_mv_refs(). This replaces the context that
was previously calculated in vp9_find_near_mvs().
The new context is unoptimized and not necessarily
any better at this stage (results pending), but eliminates
the need for a legacy call to vp9_find_near_mvs().
Based on numbers from Scott, this could help decode
speed by several %.

In a later patch I will add support for forward update of
context (assuming this helps) and refine the context as
necessary.

Change-Id: I1cd991b82c8df86cc02237a34185e6d67510698a

Change-Id: Ib39ad47a7d188f3b45416937b7eeb28c3e79b74c

Change-Id: Ic084c475844b24092a433ab88138cf58af3abbe4

Most of these were picked up by jenkins in the commit that changed
the vp8 namespace to vp9 in common/.

Change-Id: I5cbd56ffc753b92ef805133cda6acc1713a13878

For non-static functions, change the prefix to vp9_. For static functions,
remove the prefix. Also fix some comments, remove unused code or unused
function prototypes.

Change-Id: I1f8be05362f66060fe421c3d4c9a906fdf835de5

This change encompasses VP8_PTR, VP8_COMP, VP8D_COMP, VP8_COMMON,
VP8Decompressor and VP8Common.

Change-Id: I514ef4ad4e682370f36d656af1c09ee20da216ad

For local symbols, make them static instead.

Change-Id: I13d60947a46f711bc8991e16100cea2a13e3a22e

Change-Id: Ic5a5f60e1ff9d9ccae4174160d36529466eeb509

Allows B_VL_PRED & B_LD_PRED modes to be used for all blocks
within a MB in B_PRED mode. These modes were temporarily
disabled with super-block coding.

Change-Id: I973b9bdb82c3da5f12d7cc963162a28805f25303

Extend experiment to use both vectors from MBs
coded using compound prediction as candidates.

In final sort only consider best 4 candidates
for now but make sure 0,0 is always one of them.

Other minor changes to new MV reference code.
Pass in Mv list to vp8_find_best_ref_mvs().

Change-Id: Ib96220c33c6b80bd1d5e0fbe8b68121be7997095

Change-Id: I01dd96da18fe22450bb372b10ba90eab52e29bdf

Change-Id: Id38baf1b89648ef534e28be72f583137871f920c

Using surrounding reconstructed pixels from left and above to select
best matching mv to use as reference motion vector for mv encoding.

Test results:
       AVGPSNR  GLBPSNR VPXSSIM
Derf:  1.107%   1.062%  0.992%
Std-hd:1.209%   1.176%  1.029%

Change-Id: I8f10e09ee6538c05df2fb9f069abcaf1edb3fca6

Approximate the Google style guide[1] so that that there's a written
document to follow and tools to check compliance[2].

[1]: http://google-styleguide.googlecode.com/svn/trunk/cppguide.xml
[2]: http://google-styleguide.googlecode.com/svn/trunk/cpplint/cpplint.py

Change-Id: Idf40e3d8dddcc72150f6af127b13e5dab838685f

Change-Id: I0af3395500b1cb0ed629249eb6636a0c9322cb18

This is a code snapshot of experimental work currently ongoing for a
next-generation codec.

The codebase has been cut down considerably from the libvpx baseline.
For example, we are currently only supporting VBR 2-pass rate control
and have removed most of the code relating to coding speed, threading,
error resilience, partitions and various other features.  This is in
part to make the codebase easier to work on and experiment with, but
also because we want to have an open discussion about how the bitstream
will be structured and partitioned and not have that conversation
constrained by past work.

Our basic working pattern has been to initially encapsulate experiments
using configure options linked to #IF CONFIG_XXX statements in the
code. Once experiments have matured and we are reasonably happy that
they give benefit and can be merged without breaking other experiments,
we remove the conditional compile statements and merge them in.

Current changes include:
* Temporal coding experiment for segments (though still only 4 max, it
  will likely be increased).
* Segment feature experiment - to allow various bits of information to
  be coded at the segment level. Features tested so far include mode
  and reference frame information, limiting end of block offset and
  transform size, alongside Q and loop filter parameters, but this set
  is very fluid.
* Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used
  in MBs using 16x16 prediction modes within inter frames.
* Compound prediction (combination of signals from existing predictors
  to create a new predictor).
* 8 tap interpolation filters and 1/8th pel motion vectors.
* Loop filter modifications.
* Various entropy modifications and changes to how entropy contexts and
  updates are handled.
* Extended quantizer range matched to transform precision improvements.

There are also ongoing further experiments that we hope to merge in the
near future: For example, coding of motion and other aspects of the
prediction signal to better support larger image formats, use of larger
block sizes (e.g. 32x32 and up) and lossless non-transform based coding
options (especially for key frames). It is our hope that we will be
able to make regular updates and we will warmly welcome community
contributions.

Please be warned that, at this stage, the codebase is currently slower
than VP8 stable branch as most new code has not been optimized, and
even the 'C' has been deliberately written to be simple and obvious,
not fast.

The following graphs have the initial test results, numbers in the
tables measure the compression improvement in terms of percentage. The
build has  the following optional experiments configured:
--enable-experimental --enable-enhanced_interp --enable-uvintra
--enable-high_precision_mv --enable-sixteenth_subpel_uv

CIF Size clips:
http://getwebm.org/tmp/cif/
HD size clips:
http://getwebm.org/tmp/hd/
(stable_20120309 represents encoding results of WebM master branch
build as of commit#7a159071)

They were encoded using the following encode parameters:
--good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63
--end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999
--kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50
--minsection-pct=0 --maxsection-pct=800 --sharpness=0
--arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF)
--arnr-type=3

Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c

Also remove duplicate build_intra_predictors_mby/uv().

Change-Id: I78607e7304952a9b962a5b25af9bb9c48692187b

This commit merges the NEWNEAR experiment such that it
is effectively always on.

The fact that there were changes in the threading code again
highlights the need to strip out such features during the
bitstream development phase as trying to maintain this code
(especially as it is not being tested) slows the development cycle.

Change-Id: I8b34950a1333231ced9928aa11cd6d6459984b65

Commit e06c242b introduced a change to call vp8_find_near_mvs() only
once instead of once per reference frame by observing that the only
effect that the frame had was on the bias applied to the motion
vector. By keeping track of the sign_bias value, the mv to use could
be flip-flopped by multiplying its components by -1.

This behavior was subtley wrong in the case when clamping was applied
to the motion vectors found by vp8_find_near_mvs(). A motion vector
could be in-bounds with one sign bias, but out of bounds after
inverting the sign, or vice versa. The clamping must match that done
by the decoder.

This change modifies vp8_find_near_mvs() to remove the clamping from
that function. The vp8_pick_inter_mode() and vp8_rd_pick_inter_mode()
functions instead track the correctly clamped values for both bias
values, switching between them by simple assignment. The common
clamping and inversion code is in vp8_find_near_mvs_bias()

Change-Id: I17e1a348d1643497eca0be232e2fbe2acf8478e1

The code had a number of constructs like (condition)?1:0,
which is redundant with C's semantics. In the cases where a boolean
operator was used in the condition, simply remove the ternary part.
Otherwise adjust the surrounding expression to remove the condition
(eg, for rounding up. See pickinter.c and rdopt.c)

Change-Id: Icb2372defa3783cf31857d90b2630d06b2c7e1be

This commit removed the macro CONFIG_I8X8, which was used to indicate
the 8x8 intra prediction experiment, made the change fully merged in.

Change-Id: Iafa4443781ce6e83f5591c12ba615a0e92ce0ea0

vp8_mode_contexts[] is an entropy table used to code inter mode
choices. It was a fixed constant table. This commit made the entropy
context adaptive. Tests on derf set showed very good consistent gains
on all metrics: avg psnr .47%, overall psnr .46% and ssim .40%.

http://www.corp.google.com/~yaowu/no_crawl/newModeContext.html

Change-Id: Ia62b14485c948e2b74586118619c5eb2068b43b2

This commit enabled the usage of 8x8 intra prediction modes on inter
frames. There are a few TODO items related to this: 1)baseline entropy
need be calibrated; 2)cost of UV need to be done more properly rather
than using decision only relying on Y; 3)Threshold for allowing picking
8x8 intra prediction should be lowered to lower than the B_PRED.

Even with all the TODOs, tests showed consistent gain on derf set ~0.1%
(PSNR:0.08% and SSIM:0.14%). It is assumed that 8x8 intra prediction
will help more on large resolution clips, especially with above TODOs
addressed.

Change-Id: I398ada49dfc32575cfab962a569c2885111ae3ba

This is an experiment to include a mv contribution from last frame to
nearest and near mv definition. Initial test showed some small though
consistent gain.

latest patch slightly better result ~.13%-~.18%.

TODO: the entropy used to encode the mode choice, i.e. the mv counts
based conditional distribution of modes should be re-collected to
reflect this change, it is expected that there is some further gain
from that.

Change-Id: Ief1e284a36d8aa56b49ae5b360c91419ec494fa4

Small performance gains.

Change-Id: I709b9390a8a27a70f5f23574313b8db85ac7f23d

Patch 1 to Patch 3 is an initial implementation of 8x8 intra prediction
modes, here are with the following assumptions:
a. 8x8 has 4 prediction modes DC, H, V and TM
b. UV 4x4 block use the same mode as corresponding 8x8 area
c. i8x8 modes are enabled for key frame only for now
Patch 4:
d. removed debug code from previous patches
Patch 5:
e. added stats code to collect entropy stats and further cleaned up
Patch 6:
f. changed mode stats code to collect finer stats of modes
Patch 7:
g. normalized i8x8 modes distribution to total at 256 (8bits).
Patch 8:
h. fixed a bug in decoder and removed debug printf output.
Patch 9:
i. more cleanups to address paul's comment
Patch 10:
j. messy rebase/merges to bring the commit up to date.

Tests on HD clips encoded with all key frame showing consistent gain
on all clips and all metrics:~0.5%(psnr) and 0.6%(ssim):
http://www.corp.google.com/~yaowu/no_crawl/i8x8hd_allkey_fixedq.html

To build and test, configure with:
--enable-experimental --enable-i8x8

Change-Id: I9813fe07ae48cab5fdb5d904bca022514ad01e7f

Small decode performance gain (~1%) on keyframes.  No
noticeable gains on encode.  Also changed pick_intra4x4mby_modes()
to read the above and left block modes for keyframes only.

Change-Id: I1f4885252f5b3e9caf04d4e01e643960f910aba5

Declared the bmi in MODE_INFO as a union instead of B_MODE_INFO.
This reduced the memory footprint by 518,400 bytes for 1080
resolutions.  The decoder performance improved by ~4% for the
clip used and the encoder showed very small improvements. (0.5%)
This reduction was first mentioned to me by John K. and in a
later discussion by Yaowu.
This is WIP.

Change-Id: I8e175fdbc46d28c35277302a04bee4540efc8d29

The compiler produces better assembly when using int_mv
for assignments.  The compiler shifts and ors the two 16bit
values when assigning MV.

Change-Id: I52ce4bc2bfbfaf3f1151204b2f21e1e0654f960f

A large number of functions were defined with external linkage, even
though they were only used from within one file. This patch changes
their linkage to static and removes the vp8_ prefix from their names,
which should make it more obvious to the reader that the function is
contained within the current translation unit. Functions that were
not referenced were removed.

These symbols were identified by:

  $ nm -A libvpx.a | sort -k3 | uniq -c -f2 | grep ' [A-Z] ' \
    | sort | grep '^ *1 '

Change-Id: I59609f58ab65312012c047036ae1e0634f795779

Reduce the code size.

Change-Id: I2e1998557a3c8776e262c442fd758c25e17aff7a

Changes 'The VP8 project' to 'The WebM project', for consistency
with other webmproject.org repositories.

Fixes issue #97.

Change-Id: I37c13ed5fbdb9d334ceef71c6350e9febed9bbba

When the license headers were updated, they accidentally contained
trailing whitespace, so unfortunately we have to touch all the files
again.

Change-Id: I236c05fade06589e417179c0444cb39b09e4200d

Change-Id: Ieebea089095d9073b3a94932791099f614ce120c