GitLab

This CL will break lv_map experiment because it's a partial
implementation for transform kernel selection

Change-Id: I927cb70c2fb0d079d485c1a5ca32c0e72335aad7

Change-Id: I50493fa9daf2de8859608d57f8d2010842c9eb07

This function will apply av1_inverse_transform_block to
pd->dst.buf directly.

Change-Id: I703762c2d3cee2af626c190fe3b3995e3cce2082

Change-Id: Ie2cd742c68e65d4c17c52d73d819a875452e20a0

Change-Id: I246da885154303d139f5d97c53ebfc55d6dc82ca

This reverts commit ed69b09f.

Change-Id: I3f9453596e42c2a2a78f8de7326cb267d32e17a5

This error was reintroduced by
in an attempt to fix 91eb798b
a mismatch introduced by the original bug fix at
72e2e982.

BUG=aomedia:412

Change-Id: Iffc16fe0f5f3f953b0604a7cf56433350673338c

This new coding tool is targeted to complete following two tasks:
(1) Remove the inter mode NEWFROMNEARMV;
(2) Add new inter coding modes that provide compound prediction but
    using single reference frame - initially NEAREST_NEARMV from
    single reference.

Change-Id: Ifadf91147d0b12c2f62cfd79a72ce0c37c4ee949

The resizing functions in resize.h and resize.c are useful for the
frame super-res experiment. These functions will be needed in both the
encoder and decoder, so the files have been moved into av1/common.

Change-Id: I66154b7ec0eade0df460c4f4cf8eaa5f663c8904

Change-Id: I9cd9362edbb7b642f4b632bf574abfe5b2159ff3

Change-Id: I7e64307f4bd8821e0abfe804d00d022414759706

The SSE3 convolve functions do not work when scaling is involved. If
either x_step_q4 or y_step_q4 is not 16 scaling will occur and an assert
fails.

This patch creates a C version of av1_convolve, av1_convolve_c. This
function in turn calls all C versions of what av1_convolve calls. New C
versions of these called functions have been created where needed and
the same for the functions they call. This means that when scaling is
enabled no asserts fail. av1_convolve_c is called instead of
av1_convolve when x_step_q4 or y_step_q4 is not 16.

Change-Id: I604d2716e034e23a0553fb7004133d3075514a7a

1) block_raster_idx is actually raster order only when tx_size
is TX_4x8.
It's very specific, so we should put it near to the place it's
actually used.

2) Sync the meaning of block_idx on encoder/decoder sides

Change-Id: I7d37a992cb773503e29f9c0d9d2586e580aa6173

Change-Id: Icda2f6bae803fe73090261c81ac9a0f65d55d8f8

Resolve the segmentation fault issue in nightly run unit test
AV1/AltRefForcedKeyTestLarge.Frame1IsKey/0

Change-Id: Ib27ac0d41767f39114905b7edb6c220bf62214a1

lowres:
BDRATE (overall PSNR): -1.661% (up from -1542%)

Change-Id: I612cb16f1d2362ab6375a5ef3258a4ed0777ac29

The loop filter parameters change due to many experiments. The
multi-thread loop filter is built on certain assumptions that would
require changes in many table contents. Temporarily disable the
multi-thread loop filter pass and only maintain the single frame
reference during the development process.

Change-Id: I33a6a7a6fc4299f8fc414ae7f28c5a463af1e12b

Reduces value from 512 to 256.

Change-Id: Ia1f924e8b0f38baee812740d7f90e6b95c6df15f

This resolves unit test AV1/AqSegmentTest failure issue in higher
speed settings.

Change-Id: I3dfe804bb47796f254bbd87e266d190fe75b85c8

Change-Id: I816cada620c6fcff30955cf0e62766ce601eedaf

Change-Id: I1665b3812726fd40326a4ac3da79dc316529e17e

Thanks to Alex Converse for the report.

Change-Id: I47f6cb6de52ca31ab92de6d74a11a16063a8023f

Change-Id: I6570518c16d0d7707ddf4e8e8ad1b756eb5a7648

That should help 4:2:2

Change-Id: I299e43db5b75880294c501bc0ad322823e70590c

Change-Id: I66fdc495b337debbc8599c9b9ae124cb27758b92

Unify the intra boundary condition in the cb4x4 mode for all the
YUV 420/422/444 formats.

Change-Id: I97f048d5d69cbe91b6b53ef2192b2d9418d2a845

Change-Id: Ic2344a6475b967fa07f70b3ffad2714de657bb49

Scale the block size in the active map with respect to the
effective mode_info size. This resolves an active map unit
test failure issue due to out-of-bound address access.

Change-Id: Idcd5c318cb475c4e43cc2a41d90028246bf25f37

Change-Id: I5546263d3b3ce4c1b9b70175bc4e6a301b1c8463

This will make the code a bit complicated, but it will facilitate
lv_map experiment

Change-Id: Ic2d4d2caac4d138aacc8a9e86e2f1b029395f1fc

Change-Id: I2011f113cf6a66a766c1c754b4d47e913ba54689

Change-Id: Ie3cbc3161c202724c0c0d500c908206f3639ac4d

Directly use mbmi->mv[0] since the displacment of block center has
been calculated according to GM/WM model and stored in mbmi->mv[0].

Change-Id: I09bc88832d80197fccbb1df1518ad33fafa9756f

Adds an option to disable warp when obmc is used with a
warped motion neighbor.
This change will reduce the line buffer requirement for
mode/mv information since the warping parameters no longer
need to be stored.

Results: 0.05% increase in BDRATE on lowres

Change-Id: I98bd2dcdbbcd47e44f199803ed8996b0f3fd1756

Make is_chroma_reference() account for all the YUV420, 444, and
422 formats.

Change-Id: Ia87e51894493dcea86843194a34e5de05799248a

Instead of using inter/intra to determine the dst buffer has
residue or not, we use dst_has_residue.

This will provide us more flexibility to do experiment.

Change-Id: Ib1de1076cf1ea327df9003a9a149957ecb4c0a3c

This CL actually makes the code more complicated but it will allow
us to break the framework of searching tx_size with fixed tx_type

I will find a way to simplify the code later.

Change-Id: Iae933a40d0c7eb9ec65b34ebfd9d543423f304aa

This will make choose_tx_size_fix_type() more straightforward

Change-Id: Iaf2344f5742666104b08c3e3673223e197bf482e

High latency, cpu-used=0:
   PSNR | PSNR Cb | PSNR Cr | PSNR HVS |    SSIM | MS SSIM | CIEDE 2000
-0.0947 |  0.0968 |  0.1203 |  -0.0325 | -0.0648 | -0.0290 |    -0.0099

Low latency, cpu-used=0:
PSNR | PSNR Cb | PSNR Cr | PSNR HVS |    SSIM | MS SSIM | CIEDE 2000
-0.0635 |  0.1315 | -0.0771 |  -0.0122 | -0.0598 |  0.0111 |    -0.0362

High latency, cpu-used=4:
   PSNR | PSNR Cb | PSNR Cr | PSNR HVS |    SSIM | MS SSIM | CIEDE 2000
-0.1178 |  0.0026 |  0.1003 |  -0.0609 | -0.1287 | -0.1119 |    -0.1249

Low latency, cpu-used=4:
   PSNR | PSNR Cb | PSNR Cr | PSNR HVS |    SSIM | MS SSIM | CIEDE 2000
-0.0404 |  0.0547 |  0.0976 |   0.0042 | -0.0585 | -0.0234 |    -0.0245

Change-Id: I48bcdb4d3d27512160ae1e1a36308dd62cf54c59

Minor refactoring to force only Wiener or Sgrproj to be
used for luma.

Change-Id: I81d6f5dbf0fbc07252b9c57b43a035b90c5699af