GitLab

Change-Id: I91921b0a90dbaddc7010380b038955be347964b3

Change-Id: I7b2fb326e1aabc08b032177a7b914a5b8bb7376f

Change-Id: I9d8a98a2f7ed1e3116d0bae35164618c41998bac

Change-Id: I726976a297a593a35ed6cba3c660e372562f7b27

Check is done first when function si entered.

Change-Id: Ief0d0cbd4860aaf492b78728f8d22f24029b1174

It is not used in realtime mode. Reduces memory footprint.

Change-Id: I7f163225762368df5457cfd413050161d3704a3f

Removed a number of files that were unused or little-used.

Change-Id: If9ae5e5b11390077581a9a879e8a0defe709f5da

Clean up some unnecessary scoping around pick_filter_level.

Change-Id: Ic57fa33e3fcae37fe6beae977e5743783399d5af

No need to reinitialize for base Q changes.

Change-Id: Ie76ec21dd3c5582d5183dbed75ed73a1eed3e291

Change-Id: I58154faf4f3ece24f9927a5c3ab7e830e0887fb6

Currently, when the video frame width is not multiples of 16, the
source buffer has a stride of non-multiples of 16, which forces
an unaligned load in SAD function and hurts the performance. To
avoid that, this change allocates source buffers to be multiples
of 16.

Change-Id: Ib7506e3eb2cea06657d56be5a899f38dfe3eeb39

vpx_free if used contains this check. If replaced, well behaved free
will behave similarly.

Change-Id: I25483aaa8b39255b9a8cf388d6e5eaa20a908ae1

checks added to make sure that cpi->tplist
is freed correctly in vp8_dealloc_compressor_data
and vp8_alloc_compressor_data.

Change-Id: I66149dbbd25c958800ad94f4379d723191d9680d

As mentioned in check-in "Improve motion search in real-time mode",
MV prediction calculation causes speed loss for speed 7 and above.
This change added a flag to turn off this calculation for speed>6
in real-time mode.

Change-Id: I9f4ae5a8bf449222d1784b54e7d315fc8347b2d1

Allow compiling without adding vp8/{common,encoder,decoder} to the
include paths.

Change-Id: Ifeb5dac351cdfadcd659736f5158b315a0030b6c

Applied better MV prediction in real-time mode, which improves
the encoding quality.

Used quarter-pixel search instead of iterative sub-pixel search
for speed >=5 to improve encoding performance.

Tests on the test set showed:
1. For speed=-5, quality improvement: 1.7% on AvgPSNR and 2.1%
on SSIM, performance improvement: 3.6% (This counts in the
performance lose caused by MV prediction calculation in "Improve
MV prediction in vp8_pick_inter_mode() for speed>3").
2. For speed=-8, quality improvement: 2.1% on AvgPSNR and 2.5%
on SSIM. but, 6.9% performance decrease because of MV prediction
calculation. This should be improved later.

Change-Id: I349a96c452bd691081d8c8e3e54419e7f477bebd

Created a new speed 1 which is in the middle of the old
speed 0 and speed 1. (for both quality and performance)

Change-Id: I4802133cdb43f359ca787646c090899679dd5d84

Change-Id: Icf4b692099d7d249fe3553852b1022b027b28e4b

The encoder was not correctly catching transitions in the quantizer
deltas. If a delta_q was set, then the quantizer would be reinitialized
on every frame, but if they transitioned to 0, the quantizer would
not be reinitialized, leading to a encode-decode mismatch.

This bug was triggered by commit 999e155f, which sets a Y2 delta Q
for very low base Q levels.

Change-Id: Ia6733464a55ee4ff2edbb82c0873980d345446f5

Whe auto keyframe insertion is enabled and conditions are right (scene change)
the encoder can decide to insert a key frame and does a re-encoding. This can
introduce extra latency. In RT mode we do not do the re-encoding of the current
frame but force the next frame to key frame.

Change-Id: I15c175fa845ac4c1a1f18bea3676e154669522a7

Reduce the number of sync points by letting each thread
continue imediatly with a new MB row.
Better multicore scaling, improves performance by 5-20% on ARM multicore.

Change-Id: Ic97e4d1c4886a842c85dd3539a93cb217188ed1b

Change-Id: I8f3f2642b02975fbdb14982984a29821f80d30d3

The code previously tested cpi->common.refresh_alt_ref_frame
but there are situations where this flag may be set for viewable frames.

The correct test should be !cm->show_frame.

Change-Id: Ia1a600622992a4a68fe1d38ac23bf6b34b133688

This commit also removes artificial RDMULT cap for low quantizers.
The intention is to address some abnormal behavior of mode selections
at the low quantizer end, where many macroblocks were coded with
SPLITMV with all partitions using same motion vector including (0,0).
This change improves the compression quality substantially for high
quality encodings in both PSNR and SSIM terms. Overall effect on
mid/low rate range is also positive for all metrics, but smaller
in magnitude.

Change-Id: I864b29c4bd9ff610d2545fa94a19cc7e80c02667

Adjust checking points in motion vector prediction to better cover
possible movements, and get a better prediction. Tests on test
clips showed a 0.1% improvement in SSIM, and no change in PSNR
and performance.

Change-Id: Ifdab05d35e10faea1445c61bb73debf888c9d2f8

These changes are specifically targeted at fade transitions to
static scenes. Here we want to place a GF/ARF immediately
after the fade and prevent an ARF just  before the fade.

Also some code lines and comment lines shortened to 80 chars
while I was there.

Change-Id: Iefdc09a4fa7b265048fc017246b73e138693950f

Change-Id: I42a86b0488f44115f09551fc5ad6d711fd470f0d

This code fixes a bug in the calculation of
the minimum Q for alt ref frames.

It also allows an extended gf/arf interval for sections
of clips that completely static (or nearly so).

Change-Id: I1a21aaa16d4f0578e5f99b13bebd78d59403c73b

Remove allocation/deallocation of stats storage.
Remove full search functions in machine specific encoder inits.
Remove last pass validation in  validate_config.

Change-Id: I7f29be69273981a4fef6e80ecdb6217c68cbad4e

The CQ level was not using the q_trans[] array to convert
to a 0-127 range as per min and maxq

Experimental change to try and match the reconstruction
error for forced key frames approximately to that of the
previous frame by means of the recode loop. Though this
may cause extra recodes and the recode behavior has not
been optimized, it can only happen on forced key frames.

Change-Id: I1f7e42d526f1b1cb556dd461eff1a692bd1b5b2f

This change is designed to try and reduce pulsing effects when moving
with a complex transition like a fade, into an easy or static section in
an otherwise difficult clip in CQ mode.

The active CQ level is relaxed down to the user entered level for frames that
are generating less than the passed in minimum bandwidth.

Change-Id: Id6d8b551daad4f489c087bd742bc95418a95f3f0

Fixed discrepancy cpi->ni_frames vs cm->current_video_frame > 150.

Make one pass path explicit.

There is still scope for some odd behaviour around the transition
point at cpi->ni_frames > 150.

Change-Id: Icdee130fe6e2a832206d30e45bf65963edd7a74d

Where a key frame occurs because of a minimum interval
selected by the user, then these forced key frames ideally need
to be more closely matched in quality to the surrounding frame.

Change-Id: Ia55b1f047e77dc7fbd78379c45869554f25b3df7

Add a flag to always enable block4x4 search for speed=0 (good
quality) to guarantee no quality loss for speed0.

Change-Id: Ie04bbc25f7e6a33a7bfa30e05775d33148731c81

Removing unused local variables causing compiler warnings in
Visual Studio.

Change-Id: I0e2096303be1fdbc01428a6e57cca9796bb32c8a

Further experiment with restriction of the Q range.

This uses the average non KF/GF/ARF quantizer,  instead
of just relying on the initial value. It is not such a strong constraint
but there may be a reduced risk of rate misses.

Change-Id: I424fe782a37a2f4e18c70805e240db55bfaa25ec

The merge includes hooks to for CQ mode and other code
changes merged from the test branch.

CQ mode attempts to maintain a more stable quantizer within a clip
whilst also trying to adhere to a guidline maximum bitrate.

The existing target data rate parameter is used to specify the
guideline maximum bitrate.

A new parameter allows the user to specify a target CQ level.

For normal (non kf/gf/arf) frames, the quantizer will not drop BELOW the
user specified value (0-63). However, in some cases the encoder may
choose to impose a target CQ that is above that specified by the user,
if it estimates that consistent use of the target value is not compatible
with guideline maximum bitrate.

Change-Id: I2221f9eecae8cc3c431d36caf83503941b25e4c1

cpi->target_bits_per_mb is currently not being used,
so delete it.  Also removed other unused code in rdopt.c.

Change-Id: I98449f9030bcd2f15451d9b7a3b9b93dd1409923

The following features don't make sense for the first
pass in its current form and have a significant impact on its
speed (up to 50%).

Slow quantizer, slow dct and trellis optimization.

Change-Id: Id9943f6765ffbd71fc0084ec7dfbc9d376fd6fcd

Scott pointed out that last_frame_type only gets updated while
loopfilter exists. Since last_frame_type is also needed in
motion search now, it needs to be updated every frame.

Change-Id: I9203532fd67361588d4024628d9ddb8e391ad912