This commit converts the luma versions of vp9_build_inter_predictors_sb
to use a common function. Update the convolution functions to support
block sizes larger than 16x16, and add a foreach_predicted_block walker.

Next step will be to calculate the UV motion vector and implement SBUV,
then fold in vp9_build_inter16x16_predictors_mb and SPLITMV.

At the 16x16, 32x32, and 64x64 levels implemented in this commit, each
plane is predicted with only a single call to vp9_build_inter_predictor.
This is not yet called for SPLITMV. If the notion of SPLITMV/I8X8/I4X4
goes away, then the prediction block walker can go away, since we'll
always predict the whole bsize in a single step. Implemented using a
block walker at this stage for SPLITMV, as a 4x4 "prediction block size"
within the BLOCK_SIZE_MB16X16 macroblock. It would also support other
rectangular sizes too, if the blocks smaller than 16x16 remain
implemented as a SPLITMV-like thing. Just using 4x4 for now.

There's also a potential to combine with the foreach_transformed_block
walker if the logic for calculating the size of the subsampled
transform is made more straightforward, perhaps as a consequence of
supporing smaller macroblocks than 16x16. Will watch what happens there.

Change-Id: Iddd9973398542216601b630c628b9b7fdee33fe2

Use in-place buffers (dst of MACROBLOCKD) for  macroblock prediction.
This makes the macroblock buffer handling consistent with those of
superblock. Remove predictor buffer MACROBLOCKD.

Change-Id: Id1bcd898961097b1e6230c10f0130753a59fc6df

Change-Id: I655305c9e22bdd9abc893d3c40d4bc6616aa1d35

Also using ALLOWED_REFS_PER_FRAME instead of 3.

Change-Id: I810dd8521d8138edb9dbd78edede49b62f706554

It is unused.

Change-Id: Ied3269ffacf9b6303bc9d85f996384c3575ef812

Adds RD integration for 32x16, 16x32, 64x32 and 32x64 rectangular blocks.
Derf almost +0.6%, HD a little over +1.0%, STDHD +1.3%.

Change-Id: Id651fdb6a655fdbb5c47009757e63317acfb88a5

Enable recursive partition information coding from SB64X64 down to
MB16X16. The bit-stream syntax is now supporting rectangular block
sizes. It starts from SB64X64 and recursively describes the partition
type of the current block. If the partition type is PARTITION_NONE,
the block is coded as a single unit; if it is PARTITION_HORZ or
PARTITION_VERT, the block is segmented into two independently coded
rectangular units, with no further partition needed; otherwise, the
block is segmented into 4 square blocks. i.e., PARTITION_SPLIT case,
each can be potentially further partitioned.

Forward adaptive probability modeling is used for the partition
information coding, conditioned on the current block size.

Change-Id: I499365fb547839d555498e3bcc0387d8a3587d87

Change-Id: I3bbc31840af69481e1d9bb4427c9ee25abf82946

In decoder, the scaling calculation, such as (mv * x_num / x_den),
is fairly time-consuming. In this patch, we check if the scaling
happens or not at frame level, and then decide which function to
call to skip scaling calculation when no scaling is needed. Tests
showed a 3% decoder performance gain.

Change-Id: I270901dd0331048e50368cfd51ce273dd82b8733

Using regular 0 and 1 constants now.

Change-Id: Ie763503cbb727847cc8f1d6506cd6f2ee607f056

Now that the predictor is the dest, we do not need the
extra parameters.

Change-Id: I78db73d39b5aff62f15303f3d51ad2797eae74b6

To match the order of  directional intra prediction modes for larger
blocks, also renamed the i4x4 prediction modes to mirror the larger
variants.

Change-Id: I77cea4d0add6c7758460bf9c7a2fe59aca601f0b

So it is consistent with I8x8_PRED.

Change-Id: Iefa65124b2419690d83e526c611129c0ede29d11

The intra predictor supports configurable block sizes. It can handle
intra prediction down to 4x4 sizes, when enabled in BLOCK_SIZE_TYPE.

Change-Id: I7399ec2512393aa98aadda9813ca0c83e19af854

This patch will use the dest buffer instead of the
predictor buffer.  This will allow us in future commits
to remove the extra mem copy that occurs in the dequant
functions when eob == 0.  We should also be able to remove
extra params that are passed into the dequant functions.

Change-Id: I7241bc1ab797a430418b1f3a95b5476db7455f6a

Use the common block walker to calculate skippability.

Change-Id: I6721e42f065df237426c91c1d871ec226ba7cdcb

Adds a framework for doing arbitrary functions on each transform-
sized block in the mb/sb.

Change-Id: Iaffb1ae8db5ff2abfa8720c608c78376b42f2096

Merge sb32x32 and sb64x64 functions; allow for rectangular sizes. Code
gives identical encoder results before and after. There are a few
macros for rectangular block sizes under the sbsegment experiment; this
experiment is not yet functional and should not yet be used.

Change-Id: I71f93b5d2a1596e99a6f01f29c3f0a456694d728

Restructure the code to avoid the majority of per-block-size
switches, code duplication, etc. All block types (mb/sb32/sb64)
can be handled by the same code.

Change-Id: I4022718d66e31a15a7074e43f3b98cd0a5124ea7

This is a VP8-only feature (part of profile 3) that is unsupported in
VP9.

Change-Id: I78016eede8d9c834d44d4c517f3e8b8fc2a378b1

Change-Id: Ic219e7878428128e4bb1b3995e8151f92b6bd9c3

It is never used.

Change-Id: If7462357c0498ed05af2645f0c272124381d3aab

Change-Id: Icd6b4322841fefcc86f06645e6aaf1ea42fdfabd

It is never used.

Change-Id: Ibae898c52c766aabf65868611060f9c38fb85b35

Continue migrating data from BLOCKD/MACROBLOCKD to the per-plane
structures.

Change-Id: Ibbfa68d6da438d32dcbe8df68245ee28b0a2fa2c

Start grouping data per-plane, as part of refactoring to support
additional planes, and chroma planes with other-than 4:2:0
subsampling.

Change-Id: Idb76a0e23ab239180c818025bae1f36f1608bb23

Adding multiple16 function, removing redundant code, better formatting.

Change-Id: I50195b78ac8ab803e3d05c8fb05a7ca134fab386

The patch adds the flexibility to use standard EOB based coding
on smaller block sizes and nzc based coding on larger blocksizes.
The tx-sizes that use nzc based coding and those that use EOB based
coding are controlled by a function get_nzc_used().
By default, this function uses nzc based coding for 16x16 and 32x32
transform blocks, which seem to bridge the performance gap
substantially.

All sets are now lower by 0.5% to 0.7%, as opposed to ~1.8% before.

Change-Id: I06abed3df57b52d241ea1f51b0d571c71e38fd0b

Adds an experiment to use a weighted prediction of two INTER
predictors, where the weight is one of (1/4, 3/4), (3/8, 5/8),
(1/2, 1/2), (5/8, 3/8) or (3/4, 1/4), and is chosen implicitly
based on consistency of the predictors to the already
reconstructed pixels to the top and left of the current macroblock
or superblock.

Currently the weighting is not applied to SPLITMV modes, which
default to the usual (1/2, 1/2) weighting. However the code is in
place controlled by a macro. The same weighting is used for Y and
UV components, where the weight is derived from analyzing the Y
component only.

Results (over compound inter-intra experiment)
derf: +0.18%
yt: +0.34%
hd: +0.49%
stdhd: +0.23%

The experiment suggests bigger benefit for explicitly signaled weights.

Change-Id: I5438539ff4485c5752874cd1eb078ff14bf5235a

Change-Id: I0d226e4cb240caced37230f46905bf69b46e0cce

Change-Id: Ic9b336486774c95ffbb92adcb110cc0fc2a83cc5

This also changes the RD search to take account of the correct block
index when searching (this is required for ADST positioning to work
correctly in combination with tx_select).

Change-Id: Ie50d05b3a024a64ecd0b376887aa38ac5f7b6af6

This patch revamps the entropy coding of coefficients to code first
a non-zero count per coded block and correspondingly remove the EOB
token from the token set.

STATUS:
Main encode/decode code achieving encode/decode sync - done.
Forward and backward probability updates to the nzcs - done.
Rd costing updates for nzcs - done.
Note: The dynamic progrmaming apporach used in trellis quantization
is not exactly compatible with nzcs. A suboptimal approach has been
used instead where branch costs are updated to account for changes
in the nzcs.

TODO:
Training the default probs/counts for nzcs

Change-Id: I951bc1e22f47885077a7453a09b0493daa77883d

Split macroblock and superblock tokenization and detokenization
functions and coefficient-related data structs so that the bitstream
layout and related code of superblock coefficients looks less like it's
a hack to fit macroblocks in superblocks.

In addition, unify chroma transform size selection from luma transform
size (i.e. always use the same size, as long as it fits the predictor);
in practice, this means 32x32 and 64x64 superblocks using the 16x16 luma
transform will now use the 16x16 (instead of the 8x8) chroma transform,
and 64x64 superblocks using the 32x32 luma transform will now use the
32x32 (instead of the 16x16) chroma transform.

Lastly, add a trellis optimize function for 32x32 transform blocks.

HD gains about 0.3%, STDHD about 0.15% and derf about 0.1%. There's
a few negative points here and there that I might want to analyze
a little closer.

Change-Id: Ibad7c3ddfe1acfc52771dfc27c03e9783e054430

Provided a wrapper and removed duplicate code.

Change-Id: Iaef842226ec348422e459202793b001d0983ea30

Fixing code style, using array lookup instead of switch statements for
forward hybrid transforms (in the same way as for their inverses).
Consistent usage of ROUND_POWER_OF_TWO macro in appropriate places.

Change-Id: I0d3822ae11f928905fdbfbe4158f91d97c71015f

Consistent with VP8.

Change-Id: I8c316ee49f072e15abbb033a80e9c36617891f07

This patch allows coding frames using references of different
resolution, in ZEROMV mode. For compound prediction, either
reference may be scaled.

To test, I use the resize_test and enable WRITE_RECON_BUFFER
in vp9_onyxd_if.c. It's also useful to apply this patch to
test/i420_video_source.h:

  --- a/test/i420_video_source.h
  +++ b/test/i420_video_source.h
  @@ -93,6 +93,7 @@ class I420VideoSource : public VideoSource {

     virtual void FillFrame() {
       // Read a frame from input_file.
  +    if (frame_ != 3)
       if (fread(img_->img_data, raw_sz_, 1, input_file_) == 0) {
         limit_ = frame_;
       }

This forces the frame that the resolution changes on to be coded
with no motion, only scaling, and improves the quality of the
result.

Change-Id: I1ee75d19a437ff801192f767fd02a36bcbd1d496

Ensure that all inter prediction goes through a common code path
that takes scaling into account. Removes a bunch of duplicate
1st/2nd predictor code. Also introduces a 16x8 mode for 8x8
MVs, similar to the 8x4 trick we were doing before. This has an
unexpected effect with EIGHTTAP_SMOOTH, so it's disabled in that
case for now.

Change-Id: Ia053e823a8bc616a988a0af30452e1e75a739cba

The information is a duplicate of "eob" in BLOCKD.

Change-Id: Ia6416273bd004611da801e4bfa6e2d328d6f02a3