For coefficients, use int16_t (instead of short); for pixel values in
16-bit intermediates, use uint16_t (instead of unsigned short); for all
others, use uint8_t (instead of unsigned char).

Change-Id: I3619cd9abf106c3742eccc2e2f5e89a62774f7da

Prefer the standard fixed-size integer typedefs.

Change-Id: Iad75582350669e49a8da3b7facb9c259e9514a5b

Change-Id: I2c252f3ddcc99e96c1f5d3dab8bcb25a2a3637ea

Change-Id: Ia1cce221f8511561b9cbd8edb7726fbc286ff243

Support for gyp which doesn't support multiple objects in the same
static library having the same basename.

Change-Id: Ib947eefbaf68f8b177a796d23f875ccdfa6bc9dc

Change-Id: Ic084c475844b24092a433ab88138cf58af3abbe4

For non-static functions, change the prefix to vp9_. For static functions,
remove the prefix. Also fix some comments, remove unused code or unused
function prototypes.

Change-Id: I1f8be05362f66060fe421c3d4c9a906fdf835de5

This change encompasses VP8_PTR, VP8_COMP, VP8D_COMP, VP8_COMMON,
VP8Decompressor and VP8Common.

Change-Id: I514ef4ad4e682370f36d656af1c09ee20da216ad

Also merge some duplicate code related to the superblock experiment
in the RD loop.

Change-Id: Ic93f1d4d1ed81220fd7ecf6e65da2821a215b2de

Preparation for project restructuring.
Added vp9_ prefix on some function names that have global scope.
Added static declaration on some that dont.

Change-Id: If072f78b4300e8c17cfeed82c5d17b59946dcc5e

There is a macro DEFAULT_INTERP_FILTER defined in encoder/onyx_if.c that
is set as EIGHTTAP for now - so SWITCHABLE is not really used. Ideally,
this should be SWITCHABLE but that would make the encoder quite a bit slower.
We will change the default filter to SWITCHABLE once we find a faster way to
search for switchable filters.

Change-Id: Iee91832cdc07e6e14108d9b543130fdd12fc9874

Packs the bitstream with each mb's residual following its mode/mv
information.

TODO: There are still a few fields that should be packed into partition
0 but are included in partition 1, due to them being serialized from
write_kfmodes/pack_inter_mode_mvs, which execute after the first
partition is finalized. These need to be separated out into a separate
function, similar to mb_mode_mv_init() in decodemv.c.

Change-Id: I43a46c363601ab36954d07ebe498760e1e2e3af4

Allows for swtiching/setting interpolation filters at the MB
level. A frame level flag indicates whether to use a specifc
filter for the entire frame or to signal the interpolation
filter for each MB. When switchable filters are used, the
encoder chooses between 8-tap and 8-tap sharp filters. The
code currently has options to explore other variations as well,
which will be cleaned up subsequently.

One issue with the framework is that encoding is slow. I
tried to do some tricks to speed things up but it is still slow.
Decoding speed should not be affected since the number of
filter taps remain unchanged.

With the current version, we are up 0.5% on derf on average but
some videos city/mobile improve by close to 4 and 2% respectively.
If we did a full-search by turning the SEARCH_BEST_FILTER flag
on, the results are somewhat better.

The framework can be combined with filtered prediction, and I
seek feedback regarding that.

Rebased.

Change-Id: I8f632cb2c111e76284140a2bd480945d6d42b77a

The following five experiments are merged:

newentropy
newupdate
adaptive_entropy (also includes a couple of parameter changes
                  that improves results a little
                  in common/entropymode.c and encoder/modecosts.c
                  that were not merged from the internal branch)
newintramodes
expanded_coef_context

Change-Id: I8a142a831786ee9dc936f22be1d42a8bced7d270

Approximate the Google style guide[1] so that that there's a written
document to follow and tools to check compliance[2].

[1]: http://google-styleguide.googlecode.com/svn/trunk/cppguide.xml
[2]: http://google-styleguide.googlecode.com/svn/trunk/cpplint/cpplint.py

Change-Id: Idf40e3d8dddcc72150f6af127b13e5dab838685f

Using contextual coding of the mkb_skip_coeff flag using the
values of this flag from the left and above. There is a small
improvement of about 0.15% on Derf:
http://www.corp.google.com/~debargha/vp8_results/mbskipcontext.html

Refactored to use pred_common.c by adding a new context type.

Results on HD set (about 0.66% improvement):
http://www.corp.google.com/~debargha/vp8_results/mbskipcontext_hd.html

Incliding missing refactoring to use the pred_common utilities.

Change-Id: I95373382d429b5a59610d77f69a0fea2be628278

This is a code snapshot of experimental work currently ongoing for a
next-generation codec.

The codebase has been cut down considerably from the libvpx baseline.
For example, we are currently only supporting VBR 2-pass rate control
and have removed most of the code relating to coding speed, threading,
error resilience, partitions and various other features.  This is in
part to make the codebase easier to work on and experiment with, but
also because we want to have an open discussion about how the bitstream
will be structured and partitioned and not have that conversation
constrained by past work.

Our basic working pattern has been to initially encapsulate experiments
using configure options linked to #IF CONFIG_XXX statements in the
code. Once experiments have matured and we are reasonably happy that
they give benefit and can be merged without breaking other experiments,
we remove the conditional compile statements and merge them in.

Current changes include:
* Temporal coding experiment for segments (though still only 4 max, it
  will likely be increased).
* Segment feature experiment - to allow various bits of information to
  be coded at the segment level. Features tested so far include mode
  and reference frame information, limiting end of block offset and
  transform size, alongside Q and loop filter parameters, but this set
  is very fluid.
* Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used
  in MBs using 16x16 prediction modes within inter frames.
* Compound prediction (combination of signals from existing predictors
  to create a new predictor).
* 8 tap interpolation filters and 1/8th pel motion vectors.
* Loop filter modifications.
* Various entropy modifications and changes to how entropy contexts and
  updates are handled.
* Extended quantizer range matched to transform precision improvements.

There are also ongoing further experiments that we hope to merge in the
near future: For example, coding of motion and other aspects of the
prediction signal to better support larger image formats, use of larger
block sizes (e.g. 32x32 and up) and lossless non-transform based coding
options (especially for key frames). It is our hope that we will be
able to make regular updates and we will warmly welcome community
contributions.

Please be warned that, at this stage, the codebase is currently slower
than VP8 stable branch as most new code has not been optimized, and
even the 'C' has been deliberately written to be simple and obvious,
not fast.

The following graphs have the initial test results, numbers in the
tables measure the compression improvement in terms of percentage. The
build has  the following optional experiments configured:
--enable-experimental --enable-enhanced_interp --enable-uvintra
--enable-high_precision_mv --enable-sixteenth_subpel_uv

CIF Size clips:
http://getwebm.org/tmp/cif/
HD size clips:
http://getwebm.org/tmp/hd/
(stable_20120309 represents encoding results of WebM master branch
build as of commit#7a159071)

They were encoded using the following encode parameters:
--good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63
--end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999
--kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50
--minsection-pct=0 --maxsection-pct=800 --sharpness=0
--arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF)
--arnr-type=3

Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c

Change-Id: Ibcd2b9b247ff9f83331dac47f91ec285e8955ff1

Merged in most of the current common prediction changes
that were under the #if CONFIG_COMPRED option.

Change-Id: If4e6f61dbe7b86dd449f6effbe93b5eb7e893885

Moved the prob_dualpred[] sturcture to common.
Created common prediction entry for Dual flag.

Change-Id: I9ac3d128bae6114f09e5c18216d4b95cf36453d5

Extended prediction and coding of reference frame where
a subset of options are flagged as available at the segment level.

Updated copyright notices.

Switch to SAD in mbgraph code as SATD problematic for the
foreground and background separation as it can ignore large DC shifts.

Change-Id: I661dbbb2f94f3ec0f96bb928c1655e5e415a7de1

This function adds the common prediction modules,  some data structures
and a config option but does not use them.

It also corrects a bug in clearing down  the MODE_INFO border and introduces
a new element that indicates if an entry corresponds to an "in image" macro block
or is part of the border.

Change-Id: Ib69eec0876173ebe9d1de9df9537d0b2447702e0