GitLab

Creates new hybrid transforms combining symmetric DST with
ADST and DCT. Thus a total of 16 transforms are supported.

derfl: +1.659% (up about 0.2%)

Change-Id: Idde1cecdb59527890bf05da740099c3f6a5b9764

Change-Id: I61359787fdacdeb245e2798031a6e06e4afb83e0

Does not include DST1 yet.

derflr: +1.437 (8-bit internal), +7.243 (12-bit internal)
with --enable-ext-tx

Change-Id: I91f1759fd2de794755eb6384cda52e80e979cb7d

Change-Id: Ifce12a95c1cdc36dc6ac5a72759249a17407da9e

Remove the vp9_ prefix from vp10 file names.

Change-Id: I513a211b286a57d6126fc1b0fbfd6405120014f1

This commit folks the VP9 and VP10 codebase and makes libvpx
support VP8, VP9, and VP10.

Change-Id: I81782e0b809acb3c9844bee8c8ec8f4d5e8fa356

Reduced size from 124 bytes to 104 bytes.  For decode only builds,
it is reduced to 68 bytes.

Change-Id: If9e6b92285459425fa086ab5a743d0a598a69de3

Various header/test files had to be re-worked in order to
build "Remove cm parameter from vp9_decode_block_tokens()".

This patch reverts the "Remove cm" part and only contains
the re-worked header files.

Change-Id: I520958a88d1991fee988a3c784d0eac40e117a32

This commit adds encoder side control for vp9 to set color space info
in the output compressed bitstream.

It also amends the "vp9_encoder_params_get_to_decoder" test to verify
the correct color space information is passed from the encoder end to
decoder end.

Change-Id: Ibf5fba2edcb2a8dc37557f6fae5c7816efa52650

This commit rename a reserved color space entry to BT_2020, it intends
to provide support for VP9 bitstream to pass along the color space
type defined in BT.2020(Rec.2020)

please note this entry does not have any effect on encoding/decoding
behavior, but allow applications to the pass the information along
from encoding end to decoding end.

Change-Id: I4678520e89141ea5e8900f7bd1c0e95b710b7091

The basic data defs should be above block operation level.

Change-Id: I7dd9836d01120ab75e0c472baac9f15495ed0db5

Adds config parameter vp9_highbitdepth, to support highbitdepth profiles.
Also includes most vpx level high bit-depth functions. However
encode/decode in the highbitdepth profiles will not work until
the rest of the code is in place.

Change-Id: I34c53b253c38873611057a6cbc89a1361b8985a6

Specifies the bit-depth, color sampling and colorspace
for intra only frames for profiles > 0

Also adds checks to ensure that profile 1 and 3 are
exclusively used for non 420 streams.

Change-Id: Icfb15fa1acccbce8f757c78fa8a2f60591360745

Change-Id: Ic5d3a3a0dac10b49495771886a31e793bb78b5ca

Separates HBD profile int two profiles (2 and 3) consistent with the
highbitdepth branch. This patch is ported from the original highbitdepth
branch patch: https://gerrit.chromium.org/gerrit/#/c/70460/

Two of the invalid file tests needed to be updated.

Change-Id: I6a4acd2f7a60b1fb4cbcc8e0dad4eab4248431e3

Adds some high-level hooks for profile 2 before further
progress on the implementation.

According to the definitiion in this patch:
1. Profile 2 only supports 10 or 12 bit color but not 8
2. Profile 2 supports all color sampling modes: 444, 422 and 420,
and alpha plane.
3. Profile 3 is currently undefined.

Please consider the definition carefully and suggest modifications
to the definition as needed.

Change-Id: I5b284fc679e54ac5aee171af72fa7994cfd28995

Change-Id: Ic8e52a89e0df816c38cd8ff1b7c53862b9a6dff2

Change-Id: Ic334da9aee968e33762c2b25d9fbad24c844b411

Change-Id: I31c3908ba394095deb5d3a5d7b7c9b2b5328c3e8

Change-Id: Ie829ee58a55157e6972c63cebe69a5d0a3221349

Change-Id: If5711eb166609cce0a88b3cb5b56b3afeebc4fb0

Renames for consistency with other constants:
  NUM_FRAME_TYPES -> FRAME_TYPES
  NUM_PARTITION_CONTEXTS -> PARTITION_CONTEXTS

Change-Id: I3db30acb2868eb0a424237c831087b2e264ec47f

Change-Id: I62bb07c377f947cb72fac68add7a6b199e42c6b9

Adding temporary "typedef BLOCK_SIZE BLOCK_SIZE_TYPE" which will go away
after encoder's patch.

Change-Id: I06ec6a6f079401439843ec981d1496234fd7775c

Previous change c4048dbd limits the mv search range assuming max block
size of 64x64, this commit change the search range using actual block
size instead.

Change-Id: Ibe07ab02b62bf64bd9f8675d2b997af20a2c7e11

gets rid of a mix of styles

Change-Id: I3591d312157bc6f53a25438bf047765c671fd8a8

As the pixel values beyond image border are duplicates of pixels
on edge, the change limits the mv search range, any mv beyond
the limits no longer produce new/different prediction values
as entire block with pixels used for subpel interpolation are
outside image border.

Change-Id: I4c6fdf06e33c1cef1489f5470ce0fb4e5e01fb79

There will be another change set to rename BLOCK_SIZE_TYPE enum to
BLOCK_SIZE.

Change-Id: I8d1dfc873d6186fa5e554262f5169e929978085e

Removing the old one bsize_from_dim_lookup. Now we have a way to determine
block size for plane using its subsampling values (ss_size_lookup). And
then we can find the number of pixels in the block (num_pels_log2_lookup).

Change-Id: I6fc981da2ae093de81741d3d78eaefed11015db9

Change-Id: I3aae21e88b876d53ecc955260479980ffe04ad8d

Change-Id: I10bf06e3a3d5271221ae6a42a36074d01d493039

Change-Id: I6aa4191935aa93461a07c41b59fdae1eb5f5f107

many structures use bw and bh and they have different meanings.   This cl attempts
to start this clean up and remove unneccessary 2 step look up log and then
shift operations...

also removed partition type multiple operation code in bitstream.c.

Change-Id: I7e03e552bdfc0939738e430862e3073d30fdd5db

Moving TX_MODE enum to vp9_enums.h. Renaming txfm_mode variables to
tx_mode.

Change-Id: I459d1af6dd928ce7fccdf8ce30b6f1ca057bef92

Implements some of the helper functions more efficiently with
lookups rathers than branches. Modeling function is consolidated
to reduce some computations.

Also merged the two enums BLOCK_SIZE_TYPES and BlockSize into
one because there is no need to keep them separate (even though
the semantics are a little different).

No bitstream or output change.

About 0.5% speedup

Change-Id: I7d71a66e8031ddb340744dc493f22976052b8f9f

Eliminating usage of mb-units, switching to mi-units. Adding
ALIGN_POWER_OF_TWO macro.

Change-Id: I2491c969f713207c062011878b57e4e531818607

Change-Id: I32276552b3ea6dc1dce8e298be114cfe1019b31c

Bits moved: refresh_frame_flags, active_ref_idx[], ref_frame_sign_bias[],
allow_high_precision_mv, mcomp_filter_type, ref_pred_probs[].

Derf results: +0.040%

Change-Id: I011f43c7eac0371d533b255fd99aee5ed75b85a5

Move 4x4/4x8/8x4 partition coding out of experimental list.

This commit fixed the unit test failure issues. It also resolved
the merge conflicts between 4x4 block level partition and iterative
motion search for comp_inter_inter.

Change-Id: I898671f0631f5ddc4f5cc68d4c62ead7de9c5a58

This commit allows the rate-distortion optimization recursion
at encoder to go down to 4x4 block size. It deprecates the use
of I4X4_PRED and SPLITMV syntax elements from bit-stream
writing/reading. Will remove the unused probability models in
the next patch.

The partition type search and bit-stream are now capable of
supporting the rectangular partition of 8x8 block, i.e., 8x4
and 4x8. Need to revise the rate-distortion parts to get these
two partition tested in the rd loop.

Change-Id: I0dfe3b90a1507ad6138db10cc58e6e237a06a9d6