1. 03 Jul, 2013 1 commit
  2. 06 Jun, 2013 1 commit
  3. 23 May, 2013 1 commit
    • Jingning Han's avatar
      Merge 4x4 block level partition into codebase · 7ac5ac52
      Jingning Han authored
      Move 4x4/4x8/8x4 partition coding out of experimental list.
      
      This commit fixed the unit test failure issues. It also resolved
      the merge conflicts between 4x4 block level partition and iterative
      motion search for comp_inter_inter.
      
      Change-Id: I898671f0631f5ddc4f5cc68d4c62ead7de9c5a58
      7ac5ac52
  4. 14 May, 2013 1 commit
    • Jingning Han's avatar
      Enable recursive partition down to 4x4 · 1f26840f
      Jingning Han authored
      This commit allows the rate-distortion optimization recursion
      at encoder to go down to 4x4 block size. It deprecates the use
      of I4X4_PRED and SPLITMV syntax elements from bit-stream
      writing/reading. Will remove the unused probability models in
      the next patch.
      
      The partition type search and bit-stream are now capable of
      supporting the rectangular partition of 8x8 block, i.e., 8x4
      and 4x8. Need to revise the rate-distortion parts to get these
      two partition tested in the rd loop.
      
      Change-Id: I0dfe3b90a1507ad6138db10cc58e6e237a06a9d6
      1f26840f
  5. 10 May, 2013 1 commit
    • Yunqing Wang's avatar
      Add joint motion search in comp_inter_inter mode(experiment) · 9f5811c2
      Yunqing Wang authored
      In current code, motion vectors got from single prediction mode are used
      in compound prediction mode directly. These motion vectors may not give
      accurate prediction since they are searched independently. In this patch,
      we took Pascal's suggestion, and did joint motion search in compound
      prediction mode to find better motion vectors in this situation.
      Test results:
      Overall PSNR: 0.570%(derf), 0.918%(stdhd);
      SSIM: 0.572%(derf), 1.009%(stdhd);
      
      The encoder is a little slower. This can be improved since some c
      code is used in motion search.
      
      Change-Id: Ib30c9240f6c56c9b070867b4ca89412a76d9f3c6
      9f5811c2
  6. 08 May, 2013 1 commit
    • Jingning Han's avatar
      Extend left/above partition context to per mi(8x8) · 4a88ad89
      Jingning Han authored
      Update and buffer left/above partition information context per 8x8
      block. This allows to further enable recursive partition down to
      4x4 block size, and hence deprecating I4X4_PRED and SPLITMV.
      
      This commit also fixes a context buffer swap/restore issue in 32x32
      partition type search. This gives 0.1% performance gain for derf/yt.
      Will refactor the superblock partition type search into recursion
      form.
      
      Change-Id: Ib61975aca5f12b78d8018481d7fa1393d085689b
      4a88ad89
  7. 07 May, 2013 2 commits
  8. 30 Apr, 2013 2 commits
    • Ronald S. Bultje's avatar
      sb8x8 integration in rd loop. · d068d869
      Ronald S. Bultje authored
      Work-in-progress, not yet ready for review. TODO items:
      - bitstream writing (encoder) and reading (decoder)
      - decoder reconstruction
      
      Change-Id: I5afb7284e7e0480847b47cd0097cb469433c9081
      d068d869
    • Jingning Han's avatar
      Separate I4X4_PRED coding from macroblock modules · 94191b5c
      Jingning Han authored
      Separate the functionality of I4X4_PRED from decode_mb. Use
      decode_atom_intra instead, to enable recursive partition of superblock
      down to 8x8.
      
      Change-Id: Ifc89a3be82225398954169d0a839abdbbfd8ca3b
      94191b5c
  9. 26 Apr, 2013 1 commit
  10. 24 Apr, 2013 2 commits
    • Jingning Han's avatar
      Move sbsegment out of experimental list · b0e3b3df
      Jingning Han authored
      Move rectangular superblock coding out of experimental list.
      
      Change-Id: I96c37547d122330d666a67b4bf577ae54547857f
      b0e3b3df
    • Jingning Han's avatar
      Contextual entropy coding of partition syntax · ff2b8aa2
      Jingning Han authored
      This commit enables selecting probability models for recursive block
      partition information syntax, depending on its above/left partition
      information, as well as the current block size. These conditional
      probability models are reasonably stationary and consistent across
      frames, hence the backward adaptive approach is used to maintain and
      update the contextual models.
      
      It achieves coding performance gains (on top of enabling rectangular
      block sizes):
      derf:   0.242%
      yt:     0.391%
      hd:     0.376%
      stdhd:  0.645%
      
      Change-Id: Ie513d9673337f0d27abd65fb566b711d0844ec2e
      ff2b8aa2
  11. 23 Apr, 2013 1 commit
  12. 17 Apr, 2013 1 commit
    • Jingning Han's avatar
      Recursive partition syntax coding · 90a91cc6
      Jingning Han authored
      Enable recursive partition information coding from SB64X64 down to
      MB16X16. The bit-stream syntax is now supporting rectangular block
      sizes. It starts from SB64X64 and recursively describes the partition
      type of the current block. If the partition type is PARTITION_NONE,
      the block is coded as a single unit; if it is PARTITION_HORZ or
      PARTITION_VERT, the block is segmented into two independently coded
      rectangular units, with no further partition needed; otherwise, the
      block is segmented into 4 square blocks. i.e., PARTITION_SPLIT case,
      each can be potentially further partitioned.
      
      Forward adaptive probability modeling is used for the partition
      information coding, conditioned on the current block size.
      
      Change-Id: I499365fb547839d555498e3bcc0387d8a3587d87
      90a91cc6
  13. 10 Apr, 2013 1 commit
    • Ronald S. Bultje's avatar
      Make SB coding size-independent. · a3874850
      Ronald S. Bultje authored
      Merge sb32x32 and sb64x64 functions; allow for rectangular sizes. Code
      gives identical encoder results before and after. There are a few
      macros for rectangular block sizes under the sbsegment experiment; this
      experiment is not yet functional and should not yet be used.
      
      Change-Id: I71f93b5d2a1596e99a6f01f29c3f0a456694d728
      a3874850
  14. 05 Feb, 2013 1 commit
    • John Koleszar's avatar
      Convert subpixel filters to use convolve framework · 7a07eea1
      John Koleszar authored
      Update the code to call the new convolution functions to do subpixel
      prediction rather than the existing functions. Remove the old C and
      assembly code, since it is unused. This causes a 50% performance
      reduction on the decoder, but that will be resolved when the asm for
      the new functions is available.
      
      There is no consensus for whether 6-tap or 2-tap predictors will be
      supported in the final codec, so these filters are implemented in
      terms of the 8-tap code, so that quality testing of these modes
      can continue. Implementing the lower complexity algorithms is a
      simple exercise, should it be necessary.
      
      This code produces slightly better results in the EIGHTTAP_SMOOTH
      case, since the filter is now applied in only one direction when
      the subpel motion is only in one direction. Like the previous code,
      the filtering is skipped entirely on full-pel MVs. This combination
      seems to give the best quality gains, but this may be indicative of a
      bug in the encoder's filter selection, since the encoder could
      achieve the result of skipping the filtering on full-pel by selecting
      one of the other filters. This should be revisited.
      
      Quality gains on derf positive on almost all clips. The only clip
      that seemed to be hurt at all datarates was football
      (-0.115% PSNR average, -0.587% min). Overall averages 0.375% PSNR,
      0.347% SSIM.
      
      Change-Id: I7d469716091b1d89b4b08adde5863999319d69ff
      7a07eea1
  15. 26 Dec, 2012 1 commit
  16. 29 Nov, 2012 1 commit
  17. 28 Nov, 2012 1 commit
    • Jim Bankoski's avatar
      remove postproc invokes · 85cba19e
      Jim Bankoski authored
      and some miscellaneous invoke left overs
      
      Change-Id: I63191b1bfd3bea4ce30cceaeb686ec850570fc43
      85cba19e
  18. 27 Nov, 2012 1 commit
    • John Koleszar's avatar
      Add vp9_ prefix to all vp9 files · fcccbcbb
      John Koleszar authored
      Support for gyp which doesn't support multiple objects in the same
      static library having the same basename.
      
      Change-Id: Ib947eefbaf68f8b177a796d23f875ccdfa6bc9dc
      fcccbcbb
  19. 25 Nov, 2012 1 commit
  20. 21 Nov, 2012 1 commit
  21. 15 Nov, 2012 1 commit
  22. 13 Nov, 2012 1 commit
    • Yunqing Wang's avatar
      Optimize 8x8 dequant and idct · e60478d4
      Yunqing Wang authored
      Similar to 16x16 dequant and idct, based on the value of eobs, the
      8x8 dequant and idct calculation was simplified to improve decorder
      performance.
      
      Combined vp9_dequant_idct_add_8x8 and vp9_dequant_dc_idct_add_8x8
      to eliminate duplicate code.
      
      Change-Id: Ia58e50ab27f7012b7379c495837c9c0b5ba9cf7f
      e60478d4
  23. 08 Nov, 2012 1 commit
    • Yunqing Wang's avatar
      Optimize 16x16 dequant and idct · 6c17c9fa
      Yunqing Wang authored
      As suggested by Yaowu, simplified 16x16 dequant and idct. In decoder,
      after detoken step, we know the number of non-zero dct coefficients
      (eobs) in a macroblock. Idct calculation can be skipped or simplified
      based on eobs, which improves the decoder performance.
      
      Change-Id: I9ffa1cb134bcb5a7d64fcf90c81871a96d1b4018
      6c17c9fa
  24. 01 Nov, 2012 3 commits
  25. 31 Oct, 2012 2 commits
  26. 16 Oct, 2012 2 commits
  27. 14 Oct, 2012 2 commits
  28. 11 Oct, 2012 1 commit
  29. 10 Oct, 2012 1 commit
    • Jim Bankoski's avatar
      convert copy16x16 to rtcd · 89f060e8
      Jim Bankoski authored
      Convert copy16x16 from invoke to rtcd.  The first in a long
      string of converts.
      
      Change-Id: I296b0aa32f40e9fb649f7a3cb914a4e5300cad63
      89f060e8
  30. 30 Aug, 2012 1 commit
    • Jingning Han's avatar
      hybrid transform of 16x16 dimension · de6dfa6b
      Jingning Han authored
      Enable ADST/DCT of dimension 16x16 for I16X16 modes. This change provides
      benefits mostly for hd sequences.
      
      Set up the framework for selectable transform dimension.
      
      Also allowing quantization parameter threshold to control the use
      of hybrid transform (This is currently disabled by setting threshold
      always above the quantization parameter. Adaptive thresholding can
      be built upon this, which will further improve the coding performance.)
      
      The coding performance gains (with respect to the codec that has all
      other configuration settings turned on) are
      
      derf:   0.013
      yt:     0.086
      hd:     0.198
      std-hd: 0.501
      
      Change-Id: Ibb4263a61fc74e0b3c345f54d73e8c73552bf926
      de6dfa6b
  31. 20 Aug, 2012 1 commit
    • Ronald S. Bultje's avatar
      Superblock coding. · 5d4cffb3
      Ronald S. Bultje authored
      This commit adds a pick_sb_mode() function which selects the best 32x32
      superblock coding mode. Then it selects the best per-MB modes, compares
      the two and encodes that in the bitstream.
      
      The bitstream coding is rather simplistic right now. At the SB level,
      we code a bit to indicate whether this block uses SB-coding (32x32
      prediction) or MB-coding (anything else), and then we follow with the
      actual modes. This could and should be modified in the future, but is
      omitted from this commit because it will likely involve reorganizing
      much more code rather than just adding SB coding, so it's better to let
      that be judged on its own merits.
      
      Gains on derf: about even, YT/HD: +0.75%, STD/HD: +1.5%.
      
      Change-Id: Iae313a7cbd8f75b3c66d04a68b991cb096eaaba6
      5d4cffb3
  32. 08 Aug, 2012 1 commit