1. 04 Feb, 2011 2 commits
    • John Koleszar's avatar
      correct quantizer initialization · 63fc44df
      John Koleszar authored
      The encoder was not correctly catching transitions in the quantizer
      deltas. If a delta_q was set, then the quantizer would be reinitialized
      on every frame, but if they transitioned to 0, the quantizer would
      not be reinitialized, leading to a encode-decode mismatch.
      This bug was triggered by commit 999e155f, which sets a Y2 delta Q
      for very low base Q levels.
      Change-Id: Ia6733464a55ee4ff2edbb82c0873980d345446f5
    • Gaute Strokkenes's avatar
      Remove duplicate loopfilter parameters. · ffc6aeef
      Gaute Strokkenes authored
      Change-Id: I0d41415e3961c2c9492d342290c1999f9d02e6d8
  2. 03 Feb, 2011 1 commit
  3. 02 Feb, 2011 1 commit
    • Attila Nagy's avatar
      Delay auto key frame insertion in realtime configuration · e5904f2d
      Attila Nagy authored
      Whe auto keyframe insertion is enabled and conditions are right (scene change)
      the encoder can decide to insert a key frame and does a re-encoding. This can
      introduce extra latency. In RT mode we do not do the re-encoding of the current
      frame but force the next frame to key frame.
      Change-Id: I15c175fa845ac4c1a1f18bea3676e154669522a7
  4. 01 Feb, 2011 7 commits
  5. 31 Jan, 2011 2 commits
  6. 28 Jan, 2011 4 commits
    • Yaowu Xu's avatar
      change the threshold of DC check for encode breakout · 8f279596
      Yaowu Xu authored
      Previously, the DC check is to make sure there is no code-able
      DC shift for quantizer Q0, which has been verified rather
      conservative. This commit changes the criteria to have two
      components, DC and AC, to address the conservativeness. First,
      it checks if all AC energy is enough to contribute a single
      non-zero quantized AC coefficient. Second, for DC, the decision
      to skip further considers two possible scenarios: 1. There is
      no code-able 2nd order DC coefficient at all; 2 The residue is
      relatively flat, but the uniform DC change is very small, i.e.
      less than 1/2 gray level per pixel.
      Comparing to previous criteria, the new criteria is about 10%
      to 15% faster in encoding time with a very small quality loss.
      (threshold ~1000 and quality range 33db-45db)
      It should be noted that this commit enables "automatic" static
      threshold for encodebreakout if a non-zero small value is passed
      in to encoder.
      Change-Id: I0f77719a1ac2c2dfddbd950d84920df374515ce3
    • Adrian Grange's avatar
      Changed condition for using RD in Intra Mode · e9f513d7
      Adrian Grange authored
      The condition for using RD when selecting the intra coding mode
      for a MB is that the RD flag is set AND we're not in real-time
      Previously the code used RD if either the RD flag was set OR
      we were not using real-time mode.
      Change-Id: Ic711151298468a3f99babad39ba8375f66d55a08
    • Paul Wilkins's avatar
      Inconsistent distortion metric in vp8_rd_pick_intra_mbuv_mode · dcb23e2a
      Paul Wilkins authored
      This function was using a variance metric compared to and SSE metric in
      other places (eg. vp8_rd_inter_uv)
      Change-Id: I9109fcc5a13bca9db1d7ead500fe14999ab233eb
    • Tero Rintaluoma's avatar
      Adds "armvX-none-rvct" targets · 11a222f5
      Tero Rintaluoma authored
      Adds following targets to configure script to support RVCT compilation
      without operating system support (for Profiler or bare metal images).
       - armv5te-none-rvct
       - armv6-none-rvct
       - armv7-none-rvct
      To strip OS specific parts from the code "os_support"-config was added
      to script and CONFIG_OS_SUPPORT flag is used in the code to exclude OS
      specific parts such as OS specific includes and function calls for
      timers and threads etc. This was done to enable RVCT compilation for
      profiling purposes or running the image on bare metal target with
      Removed separate AREA directives for READONLY data in armv6 and neon
      assembly files to fix the RVCT compilation. Otherwise
      "ldr <reg>, =label" syntax would have been needed to prevent linker
      errors. This syntax is not supported by older gnu assemblers.
      Change-Id: I14f4c68529e8c27397502fbc3010a54e505ddb43
  7. 27 Jan, 2011 2 commits
    • Johann's avatar
      warning: pointer targets differ in signedness · 73207a1d
      Johann authored
      vp8/encoder/rdopt.c:728: warning: pointer targets in passing argument 3
      of 'macro_block_yrd' differ in signedness
      vp8/encoder/rdopt.c:541: note: expected 'int *' but argument is of type
      'unsigned int *'
      distortion is signed when calling macro_block_yrd is both other cases,
      as well as for RDCOST
      Change-Id: I5e22358b7da76a116f498793253aac8099cb3461
    • Johann's avatar
      clean up implicit declaration warnings for neon · 27000ed6
      Johann authored
      Change-Id: I6ca2d89f355839c4c770773c09fc69dcea7c1406
      warning: implicit declaration of function
  8. 26 Jan, 2011 7 commits
    • Scott LaVarnway's avatar
      Performance improvement of first pass · 3c18a2bb
      Scott LaVarnway authored
      Improved the performance of the first pass only
      (~6% on 720p test clip) by making use of LUT instead of the
      float calculations.  Might try a SIMD version later.
      Also started to make use of int_mv instead of
      Change-Id: If2a217c7d6b59cd2c25c5553e0ca7e0502403af8
    • Yunqing Wang's avatar
      Remove copies of same functions · cac54404
      Yunqing Wang authored
      Reduce the code size.
      Change-Id: I2e1998557a3c8776e262c442fd758c25e17aff7a
    • Scott LaVarnway's avatar
      Removed unused members from VP8_COMP · c4887da3
      Scott LaVarnway authored
      Change-Id: I8f3f2642b02975fbdb14982984a29821f80d30d3
    • Paul Wilkins's avatar
      Rationalize vp8_rd_pick_intra16x16mby_mode() · 35bb74a6
      Paul Wilkins authored
      Use the function macro_block_yrd() to calculate error and distortion
      in keeping with what is done for inter frames.
      The old code was using a variance metric for once case and an
      SSE function for measuring distortion in the other case.
      The function vp8_encode_intra16x16mbyrd() is no longer used.
      Change-Id: Ic228cb00a78ff637f4365b43f58fbe5a9273d36f
    • Attila Nagy's avatar
      Adds vpx_vp8_enc_asm_offsets.c.o to OBJS-yes list · 0def48b6
      Attila Nagy authored
      Change-Id: Ibd6e3bc82471839904b1086b499efc55f7c5cbaf
    • Paul Wilkins's avatar
      Correction to buffer update for non-viewable frames. · a3f71ccf
      Paul Wilkins authored
      The code previously tested cpi->common.refresh_alt_ref_frame
      but there are situations where this flag may be set for viewable frames.
      The correct test should be !cm->show_frame.
      Change-Id: Ia1a600622992a4a68fe1d38ac23bf6b34b133688
    • Yaowu Xu's avatar
      cap the best quantizer for 2nd order DC · 999e155f
      Yaowu Xu authored
      This commit also removes artificial RDMULT cap for low quantizers.
      The intention is to address some abnormal behavior of mode selections
      at the low quantizer end, where many macroblocks were coded with
      SPLITMV with all partitions using same motion vector including (0,0).
      This change improves the compression quality substantially for high
      quality encodings in both PSNR and SSIM terms. Overall effect on
      mid/low rate range is also positive for all metrics, but smaller
      in magnitude.
      Change-Id: I864b29c4bd9ff610d2545fa94a19cc7e80c02667
  9. 25 Jan, 2011 5 commits
    • Fritz Koenig's avatar
      Fix for incorrect variable declaration. · 53d8e9dc
      Fritz Koenig authored
      Commit 336aa0b7 incorrectly
      declared current_pos as and int, when it should have been
      a FIRSTPASS_STATS pointer.
      Change-Id: I0a51c7a86ebba8546c95dd5d9d1c1143d4613e40
    • Yunqing Wang's avatar
      Refine motion vector prediction for NEWMV mode · dcaaadd8
      Yunqing Wang authored
      Adjust checking points in motion vector prediction to better cover
      possible movements, and get a better prediction. Tests on test
      clips showed a 0.1% improvement in SSIM, and no change in PSNR
      and performance.
      Change-Id: Ifdab05d35e10faea1445c61bb73debf888c9d2f8
    • Johann's avatar
      move new neon subpixel function · 2168a944
      Johann authored
      previously wasn't guarded with ifdef ARMV7, causing a link error with
      Change-Id: I0526858be0b5f49b2bf11e9090180b2a6c48926d
    • Attila Nagy's avatar
      Fix issue 262, vp8cx_pack_tokens_into_partitions_armv5 · 3bf235a4
      Attila Nagy authored
      Function was asuming that partitions have equal amount of mb_rows,
      which is not always true.
      Change-Id: I59ed40117fd408392a85c633beeb5340ed2f4b25
    • Paul Wilkins's avatar
      Incorrect bit allocation in forced KF groups. · 336aa0b7
      Paul Wilkins authored
      The old 2 pass code estimated error distribution when coding a
      forced (by interval) key frame. The result of this was that in some
      cases, when allocating bits at the GF group level within a KF
      group there was either a glut of bits or starvation of bits at the end
      of the KF group.
      Added code to rescan and get the correct data once the position of
      a forced key frame has been determined.
      Change-Id: I0c811675ef3f9e4109d14bd049d7641682ffcf11
  10. 24 Jan, 2011 1 commit
    • Scott LaVarnway's avatar
      Added vp8_update_zbin_extra · 0ee525d6
      Scott LaVarnway authored
      vp8cx_mb_init_quantizer was being called for every mode checked
      in vp8_rd_pick_inter_mode.  zbin_extra is the only value that
      really needs to be recalculated.  This calculation is disabled
      when using the fast quantizer for mode selection.
      This gave a small performance boost (~.5% to 1%).
      Note: This needs to be verified with segmentation_enabled.
      Change-Id: I62716a870b3c82b4a998bdf95130ff0b02106f1e
  11. 21 Jan, 2011 2 commits
    • Yunqing Wang's avatar
      Modify sub-pixel filters to eliminate unnecessary calculations · 0822a62f
      Yunqing Wang authored
      In sub-pixel calculation, xoffset and yoffset mostly take some
      specific values. Modified sub-pixel filter functions according to
      these possible values to improve performance.
      Change-Id: I83083570af8b00ff65093467914fbb97a4e9ea21
    • Paul Wilkins's avatar
      Modified static scene check. · 0cdfef1e
      Paul Wilkins authored
      Added code to scan ahead a few frames when we see what
      we think is a static scene in the two pass GF loop to see if the
      conditions persist.
      Moved calculation of decay rate out into a fuunction.
      Change-Id: I6e9c67e01ec9f555144deafc8ae67ef25bffb449
  12. 20 Jan, 2011 2 commits
    • Paul Wilkins's avatar
      Further work to reduce pulsing. · 8064583d
      Paul Wilkins authored
      These changes are specifically targeted at fade transitions to
      static scenes. Here we want to place a GF/ARF immediately
      after the fade and prevent an ARF just  before the fade.
      Also some code lines and comment lines shortened to 80 chars
      while I was there.
      Change-Id: Iefdc09a4fa7b265048fc017246b73e138693950f
    • Adrian Grange's avatar
      Fixed use of motion percentage in KF/GF group calc · 815e1e9f
      Adrian Grange authored
      In both vp8_find_next_key_frame and define_gf_group,
      motion_pct was initialised at the top of the loop before
      next_frame stats had been read in.
      This fix sets motion_pct after next_frame stats have
      been read.
      Change-Id: I8c0bebf372ef8aa97b97fd35b42973d1d831ee73
  13. 19 Jan, 2011 2 commits
    • Paul Wilkins's avatar
      First pass loop bug. · e8675168
      Paul Wilkins authored
      Incorrect value loop_decay_rate used in GF loop.
      The intent was to test the  cumulative value decay_accumulator.
      Change-Id: I62928c63eb09f4f6936a45ebd1c23784d1c9681b
    • Henrik Lundin's avatar
      Implement error tracking in the decoder · 67fb3a51
      Henrik Lundin authored
      A new vpx_codec_control called VP8D_GET_FRAME_CORRUPTED. The output
      from the function is non-zero if the last decoded frame contains
      corruption due to packet losses.
      The decoder is also modified to accept encoded frames of zero length.
      A zero length frame indicates to the decoder that one or more frames
      have been completely lost. This will mark the last decoded reference
      buffer as corrupted. The data pointer can be NULL if the length is
      Change-Id: Ic5902c785a281c6e05329deea958554b7a6c75ce
  14. 18 Jan, 2011 2 commits
    • Yunqing Wang's avatar
      Modify calling of NEON code in sub-pixel search · ce6c954d
      Yunqing Wang authored
      In vp8_find_best_sub_pixel_step_iteratively(), many times xoffset
      and yoffset are specific values - (4,0) (0,4) and (4,4). Modified
      code to call simplified NEON version at these specific offsets to
      help with the performance.
      Change-Id: Iaf896a0f7aae4697bd36a49e182525dd1ef1ab4d
    • Jim Bankoski's avatar
      vp8e -removed undefined max call · edcf74c6
      Jim Bankoski authored
      Change-Id: I42a86b0488f44115f09551fc5ad6d711fd470f0d