1. 26 Feb, 2013 1 commit
    • John Koleszar's avatar
      Refactor inter recon functions to support scaling · 6a4f708c
      John Koleszar authored
      Ensure that all inter prediction goes through a common code path
      that takes scaling into account. Removes a bunch of duplicate
      1st/2nd predictor code. Also introduces a 16x8 mode for 8x8
      MVs, similar to the 8x4 trick we were doing before. This has an
      unexpected effect with EIGHTTAP_SMOOTH, so it's disabled in that
      case for now.
      
      Change-Id: Ia053e823a8bc616a988a0af30452e1e75a739cba
      6a4f708c
  2. 09 Feb, 2013 1 commit
    • John Koleszar's avatar
      Replace as_mv struct with array · 7ca517f7
      John Koleszar authored
      Replace as_mv.{first, second} with a two element array, so that they
      can easily be processed with an index variable.
      
      Change-Id: I1e429155544d2a94a5b72a5b467c53d8b8728190
      7ca517f7
  3. 05 Feb, 2013 1 commit
    • John Koleszar's avatar
      Convert subpixel filters to use convolve framework · 7a07eea1
      John Koleszar authored
      Update the code to call the new convolution functions to do subpixel
      prediction rather than the existing functions. Remove the old C and
      assembly code, since it is unused. This causes a 50% performance
      reduction on the decoder, but that will be resolved when the asm for
      the new functions is available.
      
      There is no consensus for whether 6-tap or 2-tap predictors will be
      supported in the final codec, so these filters are implemented in
      terms of the 8-tap code, so that quality testing of these modes
      can continue. Implementing the lower complexity algorithms is a
      simple exercise, should it be necessary.
      
      This code produces slightly better results in the EIGHTTAP_SMOOTH
      case, since the filter is now applied in only one direction when
      the subpel motion is only in one direction. Like the previous code,
      the filtering is skipped entirely on full-pel MVs. This combination
      seems to give the best quality gains, but this may be indicative of a
      bug in the encoder's filter selection, since the encoder could
      achieve the result of skipping the filtering on full-pel by selecting
      one of the other filters. This should be revisited.
      
      Quality gains on derf positive on almost all clips. The only clip
      that seemed to be hurt at all datarates was football
      (-0.115% PSNR average, -0.587% min). Overall averages 0.375% PSNR,
      0.347% SSIM.
      
      Change-Id: I7d469716091b1d89b4b08adde5863999319d69ff
      7a07eea1
  4. 10 Jan, 2013 1 commit
  5. 09 Jan, 2013 1 commit
    • Adrian Grange's avatar
      New prediction filter · 7d6b5425
      Adrian Grange authored
      This patch removes the old pred-filter experiment and replaces it
      with one that is implemented using the switchable filter framework.
      
      If the pred-filter experiment is enabled, three interopolation
      filters are tested during mode selection; the standard 8-tap
      interpolation filter, a sharp 8-tap filter and a (new) 8-tap
      smoothing filter.
      
      The 6-tap filter code has been preserved for now and if the
      enable-6tap experiment is enabled (in addition to the pred-filter
      experiment) the original 6-tap filter replaces the new 8-tap smooth
      filter in the switchable mode.
      
      The new experiment applies the prediction filter in cases of a
      fractional-pel motion vector. Future patches will apply the filter
      where the mv is pel-aligned and also to intra predicted blocks.
      
      Change-Id: I08e8cba978f2bbf3019f8413f376b8e2cd85eba4
      7d6b5425
  6. 08 Jan, 2013 1 commit
  7. 06 Jan, 2013 1 commit
  8. 26 Dec, 2012 1 commit
  9. 18 Dec, 2012 1 commit
  10. 12 Dec, 2012 1 commit
    • Ronald S. Bultje's avatar
      Consistently use get_prob(), clip_prob() and newly added clip_pixel(). · 4d0ec7aa
      Ronald S. Bultje authored
      Add a function clip_pixel() to clip a pixel value to the [0,255] range
      of allowed values, and use this where-ever appropriate (e.g. prediction,
      reconstruction). Likewise, consistently use the recently added function
      clip_prob(), which calculates a binary probability in the [1,255] range.
      If possible, try to use get_prob() or its sister get_binary_prob() to
      calculate binary probabilities, for consistency.
      
      Since in some places, this means that binary probability calculations
      are changed (we use {255,256}*count0/(total) in a range of places,
      and all of these are now changed to use 256*count0+(total>>1)/total),
      this changes the encoding result, so this patch warrants some extensive
      testing.
      
      Change-Id: Ibeeff8d886496839b8e0c0ace9ccc552351f7628
      4d0ec7aa
  11. 01 Dec, 2012 1 commit
  12. 29 Nov, 2012 1 commit
  13. 28 Nov, 2012 1 commit
  14. 27 Nov, 2012 1 commit
    • John Koleszar's avatar
      Add vp9_ prefix to all vp9 files · fcccbcbb
      John Koleszar authored
      Support for gyp which doesn't support multiple objects in the same
      static library having the same basename.
      
      Change-Id: Ib947eefbaf68f8b177a796d23f875ccdfa6bc9dc
      fcccbcbb
  15. 21 Nov, 2012 1 commit
  16. 16 Nov, 2012 1 commit
    • Deb Mukherjee's avatar
      Compound inter-intra experiment · 0c917fc9
      Deb Mukherjee authored
      A patch on compound inter-intra prediction.
      
      In compound inter-intra prediction, a new predictor for
      16x16 inter coded MBs are obtained by combining a single
      inter predictor with a 16x16 intra predictor, in a manner
      that the weight varies with distance from the top/left
      boundary. The current search strategy is to combine the best
      inter mode with the best intra mode obtained independently.
      
      Results so far:
      
      derf +0.31%
      yt +0.32%
      std-hd +0.35%
      hd +0.42%
      
      It is conceivable that the results would improve somewhat
      with a more thorough search strategy where all intra modes
      are searched given the best mv, or even a joint search for
      the best mv and the best intra mode.
      
      Change-Id: I7951f1ed0d6eb31ca32ac24d120f1585bcd8d79b
      0c917fc9
  17. 13 Nov, 2012 1 commit
  18. 02 Nov, 2012 1 commit
    • John Koleszar's avatar
      vpx_scale: sync from master · 06f3e51d
      John Koleszar authored
      Update vpx_scale from current code in master, run style transform, fix
      lint warnings.
      
      Change-Id: I47eadeb5b6881d448ea3728537f9b8a5b5aac78e
      06f3e51d
  19. 01 Nov, 2012 3 commits
  20. 31 Oct, 2012 2 commits
  21. 23 Oct, 2012 1 commit
    • Deb Mukherjee's avatar
      Merging in the Switchable interp experiment · 53731197
      Deb Mukherjee authored
      There is a macro DEFAULT_INTERP_FILTER defined in encoder/onyx_if.c that
      is set as EIGHTTAP for now - so SWITCHABLE is not really used. Ideally,
      this should be SWITCHABLE but that would make the encoder quite a bit slower.
      We will change the default filter to SWITCHABLE once we find a faster way to
      search for switchable filters.
      
      Change-Id: Iee91832cdc07e6e14108d9b543130fdd12fc9874
      53731197
  22. 22 Oct, 2012 1 commit
  23. 17 Oct, 2012 1 commit
  24. 16 Oct, 2012 1 commit
  25. 14 Oct, 2012 2 commits
  26. 10 Oct, 2012 1 commit
    • Jim Bankoski's avatar
      convert copy16x16 to rtcd · 89f060e8
      Jim Bankoski authored
      Convert copy16x16 from invoke to rtcd.  The first in a long
      string of converts.
      
      Change-Id: I296b0aa32f40e9fb649f7a3cb914a4e5300cad63
      89f060e8
  27. 06 Sep, 2012 1 commit
    • Deb Mukherjee's avatar
      New motion vector entropy coding · 00f9eb65
      Deb Mukherjee authored
      Adds a new experiment with redesigned/refactored motion vector entropy
      coding. The patch also takes a first step towards separating the
      integer and fractional pel components of a MV. However the fractional
      pel encoding still depends on the integer pel part and so they are
      not fully independent. Further experiments are in progress to see
      how much they can be decoupled without affecting performance.
      All components including entropy coding/decoding, costing for MV
      search, forward updates and backward updates to probability tables,
      have been implemented.
      
      Results so far:
      derf: +0.19%
      std-hd: +0.28%
      yt: +0.80%
      hd: +1.15%
      
      Patch: Simplifies the fractional pel models:
      derf: +0.284%
      std-hd: +0.289%
      yt: +0.849%
      hd: +1.254%
      
      Patch: Some changes in the models, rebased.
      derf: +0.330%
      std-hd: +0.306%
      yt: +0.816%
      hd: +1.225%
      
      Change-Id: I646b3c48f3587f4cc909639b78c3798da6402678
      00f9eb65
  28. 30 Aug, 2012 1 commit
    • Jingning Han's avatar
      hybrid transform of 16x16 dimension · de6dfa6b
      Jingning Han authored
      Enable ADST/DCT of dimension 16x16 for I16X16 modes. This change provides
      benefits mostly for hd sequences.
      
      Set up the framework for selectable transform dimension.
      
      Also allowing quantization parameter threshold to control the use
      of hybrid transform (This is currently disabled by setting threshold
      always above the quantization parameter. Adaptive thresholding can
      be built upon this, which will further improve the coding performance.)
      
      The coding performance gains (with respect to the codec that has all
      other configuration settings turned on) are
      
      derf:   0.013
      yt:     0.086
      hd:     0.198
      std-hd: 0.501
      
      Change-Id: Ibb4263a61fc74e0b3c345f54d73e8c73552bf926
      de6dfa6b
  29. 20 Aug, 2012 1 commit
    • Ronald S. Bultje's avatar
      Superblock coding. · 5d4cffb3
      Ronald S. Bultje authored
      This commit adds a pick_sb_mode() function which selects the best 32x32
      superblock coding mode. Then it selects the best per-MB modes, compares
      the two and encodes that in the bitstream.
      
      The bitstream coding is rather simplistic right now. At the SB level,
      we code a bit to indicate whether this block uses SB-coding (32x32
      prediction) or MB-coding (anything else), and then we follow with the
      actual modes. This could and should be modified in the future, but is
      omitted from this commit because it will likely involve reorganizing
      much more code rather than just adding SB coding, so it's better to let
      that be judged on its own merits.
      
      Gains on derf: about even, YT/HD: +0.75%, STD/HD: +1.5%.
      
      Change-Id: Iae313a7cbd8f75b3c66d04a68b991cb096eaaba6
      5d4cffb3
  30. 16 Aug, 2012 1 commit
  31. 15 Aug, 2012 1 commit
    • Paul Wilkins's avatar
      Code clean up. · 77dc5c65
      Paul Wilkins authored
      Further cases of inconsistent naming convention.
      
      Change-Id: Id3411ecec6f01a4c889268a00f0c9fd5a92ea143
      77dc5c65
  32. 14 Aug, 2012 2 commits
    • Deb Mukherjee's avatar
      Some build fixes · 32fe72eb
      Deb Mukherjee authored
      Fixes two typos that breaks the build introduced in recent check-ins.
      
      Change-Id: I3f15f3c088c48a63fede8941c9a4ba05dd0403c2
      32fe72eb
    • Paul Wilkins's avatar
      Code clean up. · 39892cce
      Paul Wilkins authored
      References to MACROBLOCKD that use "x" changed to "xd"
      to comply with convention elsewhere that x = MACROBLOCK
      and xd = MACROBLOCKD.
      
      Simplify some repeat references using local variables.
      
      Change-Id: I0ba2e79536add08140a6c8b19698fcf5077246bc
      39892cce
  33. 10 Aug, 2012 1 commit
  34. 09 Aug, 2012 1 commit
  35. 08 Aug, 2012 1 commit
    • Deb Mukherjee's avatar
      Merging in the sixteenth subpel uv experiment · 7d065653
      Deb Mukherjee authored
      Merges this experiment in to make it easier to run tests on
      filter precision, vectorized implementation etc.
      
      Also removes an experimental filter.
      
      Change-Id: I1e8706bb6d4fc469815123939e9c6e0b5ae945cd
      7d065653