1. 23 Feb, 2013 1 commit
  2. 21 Feb, 2013 1 commit
  3. 20 Feb, 2013 1 commit
  4. 15 Feb, 2013 3 commits
  5. 13 Feb, 2013 4 commits
    • Ronald S. Bultje's avatar
      Add support for tile rows. · 89a206ef
      Ronald S. Bultje authored
      These allow sending partial bitstream packets over the network before
      encoding a complete frame is completed, thus lowering end-to-end
      latency. The tile-rows are not independent.
      
      Change-Id: I99986595cbcbff9153e2a14f49b4aa7dee4768e2
      89a206ef
    • Ronald S. Bultje's avatar
      Remove 2nd-order transform for first-order DC coefficients. · 42d6be80
      Ronald S. Bultje authored
      Since addition of the larger-scale transforms (16x16, 32x32), these
      don't give a benefit at macroblock-sizes anymore. At superblock-sizes,
      2nd-order transform was never used over the larger transforms. Future
      work should test whether there is a benefit for that use case.
      
      Change-Id: I90cadfc42befaf201de3eb0c4f7330c56e33330a
      42d6be80
    • Yaowu Xu's avatar
      enable bitstream lossless support · 17db5d00
      Yaowu Xu authored
      1. Added a bit in frame header to  to indicate if a frame is encoded
      in lossless mode, so decoder does not make the decision based on Q0
      2. Minor changes to make sure that lossy coding works same as when
      the lossless experiment is not enabled.
      3. Renamed function pointers for transforms to be consistent, using
      prefix fwd_txm and inv_txm for forward and inverse respectively
      
      To encode in lossless mode, using "--lossless=1 --min-q=0 --max-q=0"
      with vpxenc.
      
      Change-Id: Ifae53b26d2ffbe378d707e29d96817b8a5e6c068
      17db5d00
    • Yaowu Xu's avatar
      fix the lossless experiment · 16f25f9d
      Yaowu Xu authored
      Change-Id: I95acfc1417634b52d344586ab97f0abaa9a4b256
      16f25f9d
  6. 12 Feb, 2013 1 commit
  7. 08 Feb, 2013 1 commit
    • John Koleszar's avatar
      Initial support for resolution changes on P-frames · 393b4856
      John Koleszar authored
      Allows inter-frames to change resolution. Currently these are
      almost equivalent to keyframes, as only intra prediction modes
      are allowed, but without the other context resets that occur on
      keyframes.
      
      Change-Id: Icd1a2a5af0d9462cc792588427b0a1f5b12e40d3
      393b4856
  8. 05 Feb, 2013 1 commit
    • Ronald S. Bultje's avatar
      [WIP] Add column-based tiling. · 1407bdc2
      Ronald S. Bultje authored
      This patch adds column-based tiling. The idea is to make each tile
      independently decodable (after reading the common frame header) and
      also independendly encodable (minus within-frame cost adjustments in
      the RD loop) to speed-up hardware & software en/decoders if they used
      multi-threading. Column-based tiling has the added advantage (over
      other tiling methods) that it minimizes realtime use-case latency,
      since all threads can start encoding data as soon as the first SB-row
      worth of data is available to the encoder.
      
      There is some test code that does random tile ordering in the decoder,
      to confirm that each tile is indeed independently decodable from other
      tiles in the same frame. At tile edges, all contexts assume default
      values (i.e. 0, 0 motion vector, no coefficients, DC intra4x4 mode),
      and motion vector search and ordering do not cross tiles in the same
      frame.
      t log
      
      Tile independence is not maintained between frames ATM, i.e. tile 0 of
      frame 1 is free to use motion vectors that point into any tile of frame
      0. We support 1 (i.e. no tiling), 2 or 4 column-tiles.
      
      The loopfilter crosses tile boundaries. I discussed this briefly with Aki
      and he says that's OK. An in-loop loopfilter would need to do some sync
      between tile threads, but that shouldn't be a big issue.
      
      Resuls: with tiling disabled, we go up slightly because of improved edge
      use in the intra4x4 prediction. With 2 tiles, we lose about ~1% on derf,
      ~0.35% on HD and ~0.55% on STD/HD. With 4 tiles, we lose another ~1.5%
      on derf ~0.77% on HD and ~0.85% on STD/HD. Most of this loss is
      concentrated in the low-bitrate end of clips, and most of it is because
      of the loss of edges at tile boundaries and the resulting loss of intra
      predictors.
      
      TODO:
      - more tiles (perhaps allow row-based tiling also, and max. 8 tiles)?
      - maybe optionally (for EC purposes), motion vectors themselves
        should not cross tile edges, or we should emulate such borders as
        if they were off-frame, to limit error propagation to within one
        tile only. This doesn't have to be the default behaviour but could
        be an optional bitstream flag.
      
      Change-Id: I5951c3a0742a767b20bc9fb5af685d9892c2c96f
      1407bdc2
  9. 30 Jan, 2013 1 commit
  10. 26 Jan, 2013 1 commit
    • Deb Mukherjee's avatar
      Adding a frame parallel decoding mode · dfd89f2e
      Deb Mukherjee authored
      Adds a flag to disable features that would inhibit frame parallel
      decoding. This includes backward adaptation and MV sorting based
      on search in ref frame buffer.
      
      Also includes some minor clean-ups.
      
      Change-Id: I434846717a47b7bcb244b37ea670c5cdf776f14d
      dfd89f2e
  11. 24 Jan, 2013 1 commit
    • Deb Mukherjee's avatar
      Adds an error-resilient mode with test · 01cafaab
      Deb Mukherjee authored
      Adds an error-resilient mode where frames can be continued
      to be decoded even when there are errors (due to network losses)
      on a prior frame. Specifically, backward updates are turned off
      and probabilities of various symbols are reset to defaults at
      the beginning of each frame. Further, the last frame's mvs are
      not used for the mv reference list, and the sorting of the
      initial list based on search on previous frames is turned off
      as well.
      
      Also adds a test where an arbitrary set of frames are skipped
      from decoding to simulate errors. The test verifies (1) that if
      the error frames are droppable - i.e. frame buffer updates have
      been turned off - there are no mismatch errors for the remaining
      frames after the error frames; and (2) if the error-frames are non
      droppable, there are not only no decoding errors but the mismatch
      PSNR between the decoder's version of the post-error frames and the
      encoder's version is at least 20 dB.
      
      Change-Id: Ie6e2bcd436b1e8643270356d3a930e8989ff52a5
      01cafaab
  12. 16 Jan, 2013 4 commits
    • John Koleszar's avatar
      Preserve the previous golden frame on golden updates · 26bd81b9
      John Koleszar authored
      This commit restores the quality lost when the buffer-to-buffer copy
      logic was removed. Note that this is specific to the current use of
      golden frames and will need rework when RTC functionality is added.
      
      Change-Id: I7324a75acd96eafd9e0f9b8633d782e390d5dc21
      26bd81b9
    • John Koleszar's avatar
      Generalize and increase frame coding contexts · 4b65837b
      John Koleszar authored
      Previously there were two frame coding contexts tracked, one for normal
      frames and one for alt-ref frames. Generalize this by signalling the
      context to use in the bitstream, rather than tieing it to the alt ref
      refresh bit. Also increase the number of contexts available to 4, which
      may be useful for temporal scalability.
      
      Change-Id: I7b66daaddd55c535c20cd16713541fab182b1662
      4b65837b
    • John Koleszar's avatar
      Start to anonymize reference frames · da832a80
      John Koleszar authored
      Remove lst_fb_idx, gld_fb_idx, alt_fb_idx, refresh_last_frame,
      refresh_golden_frame, refresh_alt_ref_frame from common. Gold/Alt are
      encode side conventions. From the decoder's perspective, we want to be
      dealing with numbered references.
      
      Updates to active_ref 2 signal mode context switches, vestigial from
      refresh_alt_ref_frame. This needs some clean up to make sense with
      increased numbers of reference frames, as well as reimplementing the
      swapping of alt/golden which was previously done using the
      buffer-to-buffer copy mechanism removed in an earlier commit.
      
      Change-Id: I7334445158b7666f9295d2a2dd22aa03f4485f58
      da832a80
    • John Koleszar's avatar
      Remove buffer-to-buffer copy logic · b8e02798
      John Koleszar authored
      This is the first in a series of commits to add additional reference
      frames to the codec. Each frame will be able to update any of the
      available references, but copying between references is not
      supported.
      
      Change-Id: I5945b5ce6cc3582c495102b4e7eed4f08c44d5a1
      b8e02798
  13. 14 Jan, 2013 1 commit
    • Ronald S. Bultje's avatar
      Remove compound intra-intra experiment. · c9071601
      Ronald S. Bultje authored
      This experiment gives little gains and adds relatively much code
      complexity (and it hinders other experiments), so let's get rid of
      it.
      
      Change-Id: Id25e79a137a1b8a01138aa27a1fa0ba4a2df274a
      c9071601
  14. 10 Jan, 2013 2 commits
  15. 08 Jan, 2013 2 commits
  16. 06 Jan, 2013 1 commit
  17. 02 Jan, 2013 1 commit
  18. 26 Dec, 2012 1 commit
  19. 18 Dec, 2012 2 commits
  20. 14 Dec, 2012 1 commit
    • Yaowu Xu's avatar
      reset segement map on key frame · 6247b239
      Yaowu Xu authored
      This is to fix a decoder crash when decoder skips a number of frame to
      continue decoding from a later key frame.
      
      Change-Id: I3ba116eba6c3440e0528a21f53745f694302e4ad
      6247b239
  21. 12 Dec, 2012 1 commit
    • Scott LaVarnway's avatar
      Improved vp9_ihtllm_c · b575394e
      Scott LaVarnway authored
      As suggested by Yaowu, we can use eob to reduce the complexity
      of the vp9_ihtllm_c function.  For the 1080p test clip used, the decoder
      performance improved by 17%.
      
      Change-Id: I32486f2f06f9b8f60467d2a574209aa3a3daa435
      b575394e
  22. 08 Dec, 2012 2 commits
    • Yaowu Xu's avatar
      experiment with CONTEXT conversion · ab480ced
      Yaowu Xu authored
      This commit changed the ENTROPY_CONTEXT conversion between MBs that
      have different transform sizes.
      
      In additioin, this commit also did a number of cleanup/bug fix:
      1. removed duplicate function vp9_fix_contexts() and changed to use
      vp8_reset_mb_token_contexts() for both encoder and decoder
      2. fixed a bug in stuff_mb_16x16 where wrong context was used for
      the UV.
      3. changed reset all context to 0 if a MB is skipped to simplify the
      logic.
      
      Change-Id: I7bc57a5fb6dbf1f85eac1543daaeb3a61633275c
      ab480ced
    • Ronald S. Bultje's avatar
      Introduce vp9_coeff_probs/counts/stats/accum types. · 885cf816
      Ronald S. Bultje authored
      Use these, instead of the 4/5-dimensional arrays, to hold statistics,
      counts, accumulations and probabilities for coefficient tokens. This
      commit also re-allows ENTROPY_STATS to compile.
      
      Change-Id: If441ffac936f52a3af91d8f2922ea8a0ceabdaa5
      885cf816
  23. 07 Dec, 2012 1 commit
    • Ronald S. Bultje's avatar
      32x32 transform for superblocks. · c456b35f
      Ronald S. Bultje authored
      This adds Debargha's DCT/DWT hybrid and a regular 32x32 DCT, and adds
      code all over the place to wrap that in the bitstream/encoder/decoder/RD.
      
      Some implementation notes (these probably need careful review):
      - token range is extended by 1 bit, since the value range out of this
        transform is [-16384,16383].
      - the coefficients coming out of the FDCT are manually scaled back by
        1 bit, or else they won't fit in int16_t (they are 17 bits). Because
        of this, the RD error scoring does not right-shift the MSE score by
        two (unlike for 4x4/8x8/16x16).
      - to compensate for this loss in precision, the quantizer is halved
        also. This is currently a little hacky.
      - FDCT and IDCT is double-only right now. Needs a fixed-point impl.
      - There are no default probabilities for the 32x32 transform yet; I'm
        simply using the 16x16 luma ones. A future commit will add newly
        generated probabilities for all transforms.
      - No ADST version. I don't think we'll add one for this level; if an
        ADST is desired, transform-size selection can scale back to 16x16
        or lower, and use an ADST at that level.
      
      Additional notes specific to Debargha's DWT/DCT hybrid:
      - coefficient scale is different for the top/left 16x16 (DCT-over-DWT)
        block than for the rest (DWT pixel differences) of the block. Therefore,
        RD error scoring isn't easily scalable between coefficient and pixel
        domain. Thus, unfortunately, we need to compute the RD distortion in
        the pixel domain until we figure out how to scale these appropriately.
      
      Change-Id: I00386f20f35d7fabb19aba94c8162f8aee64ef2b
      c456b35f
  24. 06 Dec, 2012 1 commit
  25. 30 Nov, 2012 2 commits
    • Deb Mukherjee's avatar
      Adds switchable filters with superblocks · 66323307
      Deb Mukherjee authored
      Allows switchbale filters to be used without mismatch when the
      superblock experiment is on.
      
      Also removes a spurious clamping code in decodemv.c which causes
      rare encode/decode mismatches.
      
      Change-Id: I809d9ee0b2859552b613500b539a615515b863ae
      66323307
    • Jim Bankoski's avatar
      warnings in various experiments · 9f937042
      Jim Bankoski authored
      Change-Id: Ib5106d4772450f8026f823dd743f162ab833b1d6
      9f937042
  26. 29 Nov, 2012 2 commits