GitLab

Implements some of the helper functions more efficiently with
lookups rathers than branches. Modeling function is consolidated
to reduce some computations.

Also merged the two enums BLOCK_SIZE_TYPES and BlockSize into
one because there is no need to keep them separate (even though
the semantics are a little different).

No bitstream or output change.

About 0.5% speedup

Change-Id: I7d71a66e8031ddb340744dc493f22976052b8f9f

Adding segmentation struct to vp9_seg_common.h. Struct members are from
macroblockd and VP9Common structs. Moving segmentation related constants
and enums to vp9_seg_common.h.

Change-Id: I23fabc33f11a359249f5f80d161daf569d02ec03

Change-Id: Ie0cb732fdcb98616a422c4463bff80642248d136

Adds a speed feature to eliminate full-rd computation if the modeled
rd or rd based on a different parameter in the same mode is already
a lot larger than the best rd yet.

Specifically, only search the sharp and smooth filters if the modeled
rd cost based on the  regular filter is within a certain factor of the
best rd cost so far. Also, skip full-rd computation of non splitmv
inter modes if the modeled rd cost based on pred error is within the
same factor of the best rd cost so far.

Also adds some enhancements in the rd search for splitmv mode to
speed things up by early breakouts. Negligible impact on performance.

Resuts on derfraw300:
psnr:    -0.013% with the splitmv enhancements, -0.24% with the rd
         breakout feature on.
speedup: 6% with splitmv enhancements, 20% with also residual breakout
         (tested on football sequence at 600 Kbps)

Change-Id: I37abc308ea9f110c1679ce649b6a7e73ab1ad5fc

converted to lookup to avoid unnecessary code

Change-Id: I2ee6a01f06984cc2c4ba74b3fffd215318f749d2

    Replace case statement with lookup.
    Small speed gain at low speed settings but at speed 2+ where the
    number of motion searches etc. falls the impact rises to ~3-4%.

    Change-Id: Idff639b7b302ee65e042b7bf836943ac0a06fad8

Change-Id: I5940719a4a161f8c26ac9a6753f1678494cec644

Change-Id: I08fc6e474ff2c12cfa065bae4989c724276e2c83

(1) Refines the modeling function and uses that to add some speed
features. Specifically, intead of using a flag use_largest_txfm as
a speed feature, an enum tx_size_search_method is used, of which
two of the types are USE_FULL_RD and USE_LARGESTALL. Two other
new types are added:
USE_LARGESTINTRA (use largest only for intra)
USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for
inter)

(2) Another change is that the framework for deciding transform type
is simplified to use a heuristic count based method rather than
an rd based method using txfm_cache. In practice the new method
is found to work just as well - with derf only -0.01 down.
The new method is more compatible with the new framework where
certain rd costs are based on full rd and certain others are
based on modeled rd or are not computed. In this patch the existing
rd based method is still kept for use in the USE_FULL_RD mode.
In the other modes, the count based method is used.
However the recommendation is to remove it eventually since the
benefit is limited, and will remove a lot of complications in
the code

(3) Finally a bug is fixed with the existing use_largest_txfm speed feature
that causes mismatches when the lossless mode and 4x4 WH transform is
forced.

Results on derf:
USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction
USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a
pretty good compromise)
USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction
(currently the benefit of modeling is limited for txfm size selection,
but keeping this enum as a placeholder) .
USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing
use_largest_txfm speed feature).

Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936

Change-Id: Ia547a5dd7650b771fd00edd673ab9f920270731c

since:
92479d95 Make update_partition_context faster

fixes:
vp9/common/vp9_blockd.h:408:22: error:
non-constant-expression cannot be narrowed from type 'int' to 'char' in
initializer list [-Wc++11-narrowing]
  char pcvalue[2] = {~(0xe << boffset), ~(0xf <<boffset)};
                     ^~~~~~~~~~~~~~~~~

Change-Id: Id5b00b9a72d00a2b314081a23879bd1fa3ce983b

Use vpx_memset for updating the partition contexts. Thanks to Noah
for pointing out the need of refactoring in this part.

Change-Id: I67fb78429d632298f1cd8a0be346cc76f79392a6

Change-Id: Ieb989830f49e6708ee7728eddebf7a2144c37c6f

Removing block index (ib) parameter from get_tx_type_{8x8, 16x16}
functions.

Change-Id: Ia213335aae7a7cb027f97b9cc9b04519840250f1

This reduced the size of the MODE_INFO array (mip and prev_mip)
by 425,568 bytes each for 1080p resolutions.

Change-Id: Ifa513ec2d0a49e8ec0867ec90620762fb7f1261d

Using MV instead of int_mv for function arguments.

Change-Id: Ic25e13dccbc98fac1fa1b3255127e00cca2a57f6

This flag no longer needed.

Change-Id: If13482015ddb92d225792ea5c0ee455d2285d1f6

These functions are not used, and appear to have been superceded.

Change-Id: I86fe51b088264f6b1b8d4d232bba97b371b98120

Change the argument of get_uv_tx_size() to be an MBMI pointer, so that the
correct column's MBMI can be passed to the function.

Change-Id: Ied6b8ec33b77cdd353119e8fd2d157811815fc98

Fixed point scaling factors are calculated once for each
reference frame by using integer division. Otherwise fixed point
scaling routines are used in all scaling calculations. This makes it
possible to calculate fixed point scaling factors on device driver
software and pass them to hardware and thus avoid division on hardware.

TODO:
 - Missing check for maximum frame dimensions
   (currently scaling uses 14 bits)
 - Missing check for maximum scaling ratio
   (upscaling 16:1, downscaling 2:1)

Problems:
 - Straightforward fixed point implementation can cause error +-1
   compared to integer division (i.e. in x_step_q4). Should only
   be an issue for frames larger than 16k.

Change-Id: I3cf4dabd610a4dc18da3bdb31ae244ebaf5d579c

Adds coding of transform size within a frame by use of context
of transform sizes selected in left and above blocks.

Also incorporates code for generating stats.

TODO: generate and incorporate new default stats

Change-Id: I6a7af099f6ad61d448521d9a51167aedaf638ed6

It has a range of -255,255, so should be int16_t, not int8_t.

Change-Id: I5ef4b6aefb6212b0f35f4754f3c4d73fddbc52a0

With the removal of i4X4 and SPLIT_MV modes, the two entries for the
modes are no longer used. This patch remove the coding of the deltas.

Change-Id: Iea4eb500404ebe9706159380a03b8eca542fb4c3

Changes to the coding of transform sizes, along with forward
and backward probability updates.

Results:
derf300: +0.241%

Context based coding of transform sizes will be in a separate
patch.

Change-Id: I97241d60a926f014fee2de21fa4446ca56495756

Code intra/inter, then comp/single, then the ref frame selection.
Use contextualization for all steps. Don't code two past frames
in comp pred mode.

Change-Id: I4639a78cd5cccb283023265dbcc07898c3e7cf95

Split partition probabilities between keyframes and non-keyframes,
since they are fairly different. Also have per-blocksize interframe
y intramode probabilities, since these vary heavily between different
blocksizes.

Lastly, replace default probabilities for partitioning and intra modes
with new ones generated from current codec. Replace counts with actual
probabilities also.

Change-Id: I77ca996e25e4a28e03bdbc542f27a3e64ca1234f

This avoids encoding tokens for blocks that are entirely
in the UMV border. This changes the bitstream.

Change-Id: I32b4df46ac8a990d0c37cee92fd34f8ddd4fb6c9

This commit makes the coding/reconstruction operations of intra
coding rate-distortion loop for UV components consistent with those
of the encoding process.

key frame coding gains:
derf:   0.11%
stdhd:  0.42%

Change-Id: I8d49f83924a320e3689ef2d60096c49d7f0c7a40

NO bitstream change

Change-Id: I79f6146dac5fdd157051b6f8dc611c0b7b5e5f7f

Change-Id: Ie869ea4992e26867caec46cb878fc86a646aeb9f

Change-Id: I02c17fb733c0f3c22dc3167c3d3182797415f1ae

Change-Id: Ic6555128206d61f47a46c550cb3dcaf3b4ec6374

These are now merged in a new define called VP9_INTRA_MODES.

Change-Id: I0890f895756a7395d84c92f98f43e43f4cf9050d

Change-Id: I715870513d1fef8471bfd0f5218a79360a1ef126

We leave it in rdopt.c as a local define for now - this can be removed
later. In all other places, we remove it, thereby slightly decreasing
the size of some arrays in the bitstream.

Change-Id: Ic2a9beb97a4eda0b086f62c039d994b192f99ca5

It remains as a local define in rdopt.c so we can distinguish between
split and non-split modes in the RD loop, but disappears outside that
scope in the codec.

Change-Id: I98c18fe5ab7e4fbd1d6620ec5695e2ea20513ce9

This patch removes the implicit segmentation
experiment from the code base as the benefits
were still unproven as of the bitstream deadline.

Change-Id: I273b99d8d621d1853eac4182f97982cb5957247e

This patch checks at the frame level to see if the previous
mode info context can be used.  This patch eliminates the
flag check that was done for every mode and removes another
check that was done prior to every vp9_find_mv_refs().

Change-Id: I9da5e18b7e7e28f8b1f90d527cad087073df2d73

1. remove prediction mode conversion
2. unified bmode, same for key and non-key frame
3. set I4X4_PRED count for pdf to 0, as I4X4_PRED is no longer
coded ever. It is determined by ref_frame and block partition

Change-Id: If5b282957c24339b241acdb9f2afef85658fe47d

This commit removes the use of bmi_ in the first-pass encoding by
forcing encode_intra4x4block_ to use DC_PRED, followed by DCT_DCT
only, as John suggested. This makes the need for bmi buffer only
up to 4 entries, instead of 16.

Change-Id: I3410007dfae789ee46a09ae20c39d3ce3c7954aa

Also do per-partition motion vector referencing in <sb8x8 partitions,
and adjust mvref finding for sub8x8 partitions.

Change-Id: Id3ed1ed4d2a8910d11d327db6cc63b8eb79f941f