1. 07 May, 2013 2 commits
  2. 04 May, 2013 1 commit
    • John Koleszar's avatar
      Remove old_block_idx_4x4 · acc9c125
      John Koleszar authored
      Removes several instances where the old block numbering was
      still in use.
      
      Change-Id: Id35130591455a4abe6844613e45c0b70c1220c08
      acc9c125
  3. 30 Apr, 2013 1 commit
  4. 29 Apr, 2013 1 commit
  5. 25 Apr, 2013 2 commits
    • Ronald S. Bultje's avatar
      Use b_width/height_log2 instead of mb_ where appropriate. · c849eaca
      Ronald S. Bultje authored
      Basic assumption: when talking about transform units, use b_; when
      talking about macroblock indices, use mb_.
      
      Change-Id: Ifd163f595d4924ff892de4eb0401ccd56dc81884
      c849eaca
    • John Koleszar's avatar
      Fix incorrect dequant used in detokenize · e40a7690
      John Koleszar authored
      The quantizer can vary per-plane, and the dequantization vector is
      available in the per-plane part of MACROBLOCKD. The previous code would
      incorrectly use the Y quantizer for the whole macroblock.
      
      Change-Id: I3ab418aef9168ea0ddcfa4b7c0be32ae48b536d7
      e40a7690
  6. 24 Apr, 2013 1 commit
  7. 22 Apr, 2013 4 commits
  8. 18 Apr, 2013 1 commit
  9. 17 Apr, 2013 2 commits
  10. 16 Apr, 2013 1 commit
  11. 11 Apr, 2013 3 commits
  12. 10 Apr, 2013 1 commit
  13. 08 Apr, 2013 1 commit
  14. 05 Apr, 2013 1 commit
    • John Koleszar's avatar
      Move EOB to per-plane data · 05a79f2f
      John Koleszar authored
      Continue migrating data from BLOCKD/MACROBLOCKD to the per-plane
      structures.
      
      Change-Id: Ibbfa68d6da438d32dcbe8df68245ee28b0a2fa2c
      05a79f2f
  15. 04 Apr, 2013 2 commits
  16. 03 Apr, 2013 1 commit
    • John Koleszar's avatar
      Remove special case vp9_decode_coefs_4x4 · 1e5f25ec
      John Koleszar authored
      This code was only called in the BPRED case, but had no real special
      case associated with it. Made BPRED behave like all other modes. No
      bitstream change.
      
      Change-Id: I87ba11fe723928b6314d094979011228d5ba006f
      1e5f25ec
  17. 28 Mar, 2013 2 commits
    • Deb Mukherjee's avatar
      Framework changes in nzc to allow more flexibility · fe9b5143
      Deb Mukherjee authored
      The patch adds the flexibility to use standard EOB based coding
      on smaller block sizes and nzc based coding on larger blocksizes.
      The tx-sizes that use nzc based coding and those that use EOB based
      coding are controlled by a function get_nzc_used().
      By default, this function uses nzc based coding for 16x16 and 32x32
      transform blocks, which seem to bridge the performance gap
      substantially.
      
      All sets are now lower by 0.5% to 0.7%, as opposed to ~1.8% before.
      
      Change-Id: I06abed3df57b52d241ea1f51b0d571c71e38fd0b
      fe9b5143
    • Ronald S. Bultje's avatar
      Fix mix-up in pt token indexing. · 9eea9fa2
      Ronald S. Bultje authored
      This fixes uninitialized reads in the trellis, and probably makes the
      trellis do something again.
      
      Change-Id: Ifac8dae9aa77574bde0954a71d4571c5c556df3c
      9eea9fa2
  18. 27 Mar, 2013 1 commit
    • Dmitry Kovalev's avatar
      Tokenization code cleanup. · 063628c8
      Dmitry Kovalev authored
      Moving almost identical code to decode_sb32 and decode_sb64 functions.
      
      Change-Id: Id39377aa5106be85d5b0fc3f83586b3779a6c0da
      063628c8
  19. 26 Mar, 2013 3 commits
    • Ronald S. Bultje's avatar
      Add col/row-based coefficient scanning patterns for 1D 8x8/16x16 ADSTs. · d9094d8f
      Ronald S. Bultje authored
      These are mostly just for experimental purposes. I saw small gains (in
      the 0.1% range) when playing with this on derf.
      
      Change-Id: Ib21eed477bbb46bddcd73b21c5c708a5b46abedc
      d9094d8f
    • Ronald S. Bultje's avatar
      Redo banding for all transforms. · 3120dbdd
      Ronald S. Bultje authored
      Now that the first AC coefficient in both directions use the same DC
      as their context, there no longer is a purpose in letting both have
      their own band. Merging these two bands allows us to split bands for
      some of the very high-frequency AC bands.
      
      In addition, I'm redoing the banding for the 1D-ADST col/row scans. I
      don't think the old banding made any sense at all (it merged the last
      coefficient of the first row/col in the same band as the first two of
      the second row/col), which was clearly an oversight from the band being
      applied in scan-order (rather than in their actual position). Now,
      coefficients at the same position will be in the same band, regardless
      what scan order is used. I think this makes most sense for the purpose
      of banding, which is basically "predict energy for this coefficient
      depending on the energy of context coefficients" (i.e. pt).
      
      After full re-training, together with previous patch, derf gains about
      1.2-1.3%, and hd/stdhd gain about 0.9-1.0%.
      
      Change-Id: I7a0cc12ba724e88b278034113cb4adaaebf87e0c
      3120dbdd
    • Ronald S. Bultje's avatar
      Use above/left (instead of previous in scan-order) as token context. · 790fb132
      Ronald S. Bultje authored
      Pearson correlation for above or left is significantly higher than for
      previous-in-scan-order (absolute values depend on position in scan, but
      in general, we gain about 0.1-0.2 by using either above or left; using
      both basically just makes this even better). For eob branch skipping,
      we continue to use the previous token in scan order.
      
      This helps about 0.9% on derf after re-training on a limited data set.
      Full re-training and results on larger-resolution clips are pending.
      
      Note that this commit breaks trellis, so we can probably get further
      gains out of it by fixing trellis at some later point.
      
      Change-Id: Iead68e296fc3a105cca746b5e3da9555d6010cfe
      790fb132
  20. 07 Mar, 2013 2 commits
    • Ronald S. Bultje's avatar
      Re-add support for ADST in superblocks. · d3724abe
      Ronald S. Bultje authored
      This also changes the RD search to take account of the correct block
      index when searching (this is required for ADST positioning to work
      correctly in combination with tx_select).
      
      Change-Id: Ie50d05b3a024a64ecd0b376887aa38ac5f7b6af6
      d3724abe
    • Deb Mukherjee's avatar
      Coding con-zero count rather than EOB for coeffs · eb6ef241
      Deb Mukherjee authored
      This patch revamps the entropy coding of coefficients to code first
      a non-zero count per coded block and correspondingly remove the EOB
      token from the token set.
      
      STATUS:
      Main encode/decode code achieving encode/decode sync - done.
      Forward and backward probability updates to the nzcs - done.
      Rd costing updates for nzcs - done.
      Note: The dynamic progrmaming apporach used in trellis quantization
      is not exactly compatible with nzcs. A suboptimal approach has been
      used instead where branch costs are updated to account for changes
      in the nzcs.
      
      TODO:
      Training the default probs/counts for nzcs
      
      Change-Id: I951bc1e22f47885077a7453a09b0493daa77883d
      eb6ef241
  21. 05 Mar, 2013 1 commit
    • Ronald S. Bultje's avatar
      Make superblocks independent of macroblock code and data. · 111ca421
      Ronald S. Bultje authored
      Split macroblock and superblock tokenization and detokenization
      functions and coefficient-related data structs so that the bitstream
      layout and related code of superblock coefficients looks less like it's
      a hack to fit macroblocks in superblocks.
      
      In addition, unify chroma transform size selection from luma transform
      size (i.e. always use the same size, as long as it fits the predictor);
      in practice, this means 32x32 and 64x64 superblocks using the 16x16 luma
      transform will now use the 16x16 (instead of the 8x8) chroma transform,
      and 64x64 superblocks using the 32x32 luma transform will now use the
      32x32 (instead of the 16x16) chroma transform.
      
      Lastly, add a trellis optimize function for 32x32 transform blocks.
      
      HD gains about 0.3%, STDHD about 0.15% and derf about 0.1%. There's
      a few negative points here and there that I might want to analyze
      a little closer.
      
      Change-Id: Ibad7c3ddfe1acfc52771dfc27c03e9783e054430
      111ca421
  22. 27 Feb, 2013 1 commit
  23. 26 Feb, 2013 1 commit
  24. 25 Feb, 2013 1 commit
    • Dmitry Kovalev's avatar
      Code cleanup. · ab196b7e
      Dmitry Kovalev authored
      Lower case names of variables. Removing redundant spaces, parentheses,
      casts, and variables.
      
      Change-Id: I55b80c55b7d5adca44c1e8adb40a124c0680f229
      ab196b7e
  25. 23 Feb, 2013 2 commits
    • Ronald S. Bultje's avatar
      Split coefficient token tables intra vs. inter. · 0c9e2e9a
      Ronald S. Bultje authored
      Change-Id: I5416455f8f129ca0f450d00e48358d2012605072
      0c9e2e9a
    • Paul Wilkins's avatar
      Further changes to coefficient contexts. · c17672a3
      Paul Wilkins authored
      This patch alters the balance of context between the
      coefficient bands (reflecting the position of coefficients
      within a transform blocks) and the energy of the previous
      token (or tokens) within a block.
      
      In this case the number of coefficient bands is reduced
      but more previous token energy bands are supported.
      
      Some initial rebalancing of the default tables has been
      by running multiple derf clips at multiple data rates using
      the ENTOPY_STATS macro. Further balancing needs to be
      done using larger image formatsd especially in regard to
      the bigger transform sizes which are not as well represented
      in encodings of smaller image formats.
      
      Change-Id: If9736e95c391e711b04aef6393d26f60f36e1f8a
      c17672a3
  26. 21 Feb, 2013 1 commit