1. 22 Feb, 2017 15 commits
  2. 21 Feb, 2017 4 commits
  3. 18 Feb, 2017 8 commits
  4. 17 Feb, 2017 11 commits
    • Urvang Joshi's avatar
      InterpFilter type: Create an enum. · a9b174bd
      Urvang Joshi authored
      We use a single enum instead of multiple #defines.
      - Ensures better type checking
      - Enum values are generated implicitly, and hard-coded #defines are not
      required.
      - We use ATTRIBUTE_PACKED to indicate that the enum should still use the
      smallest integral type.
      
      Change-Id: I7532428da31744d3441b363bd932a7f233ee7ab5
      a9b174bd
    • Yaowu Xu's avatar
      Change to use correct size · 0a79a1b1
      Yaowu Xu authored
      Replace obselete size "4" with correct one "tile_size_bytes". This
      fixes a decoder crash.
      
      BUG=aomedia:352
      
      Change-Id: I5b1c606a4d5be946acc68b3cfe0d0603a5591c44
      0a79a1b1
    • Debargha Mukherjee's avatar
      Replace division in self-guided filter · 4be12628
      Debargha Mukherjee authored
      Replaces division with multiplication in self-guided
      filter.
      
      The guided filter requires computation of:
      n^2.s^2/(n^2.s^2 + n^2.e).
      This is now implemented by computation of n^2.s^2/n^2.e followed
      by using a lookup table for the function f(x) = x/(x+1).
      To compute n^2.s^2/n^2.e, we use an integer multiplication based
      implementation which becomes feasible since n^2.e can only
      take a few values and their corresponding multipliers can be
      pre-computed.
      There is also another divison by n, that is also integerized.
      
      Change-Id: Id7b81bbafead0b8f04a1853ec69b9dec423bb66a
      4be12628
    • Debargha Mukherjee's avatar
      Support trapezoidal models for global motion · 5dfa9300
      Debargha Mukherjee authored
      Adds functinoality for least-squares, RANSAC as well as encoding and
      decoding with new constrained homographies that warp blocks to horizontal
      and/or vertical trapezoids. This is for future experimentation. None
      of the models are actually enabled in the code.
      
      Change-Id: I1936018c6b11587d6fd83c3a2c63548cb641b33f
      5dfa9300
    • Thomas Daede's avatar
      Avoid unused variable warnings when CLPF and dering are enabled. · 15dbc1a1
      Thomas Daede authored
      Change-Id: I7909756e6a7d2da817b3354d6a8cb341cdc5bf98
      15dbc1a1
    • Nathan E. Egge's avatar
      Use tx_size_cdf with CONFIG_EC_MULTISYMBOL. · 2ea519e5
      Nathan E. Egge authored
      This commit produces a bit-exact bitstream because prior calls to code
       the tx_size using aom_write_tree() would automatically convert the
       aom_tree_index on the fly to a CDF.
      The tx_size_cdf[]'s are now computed once per frame.
      Based on recent tests, this patch reduces decode time by 4%.
      
      Change-Id: I920dbf036b8a9574ea6e65ae5f9c43eef1c3f864
      2ea519e5
    • Yushin Cho's avatar
      Remove PVQ_CHROMA_RD codes · 5c207296
      Yushin Cho authored
      Which was a workaround to balance the quality between
      luma and chroma when PVQ is enabled, by
      1) skipping PVQ DC RDO for chroma and
      2) using smaller lambda value (x0.5) for intra prediction of chroma,
      intended to spend more bits and thus improve quality for chroma.
      
      The change in metric for 5 frames of objective-1-fast is:
      PSNR  PSNR-HVS  SSIM  CIEDE-2000  PSNR Cb PSNR Cr  MS-SSIM
      -1.45 -1.54     -1.46 4.62        13.71   14.87     -1.47
      
      For still images (subset1)
      PSNR  PSNR-HVS  SSIM  CIEDE-2000  PSNR Cb PSNR Cr  MS-SSIM VMAF
      -1.52 -1.54     -1.60 2.56        11.92   12.17     -1.52  -1.66
      
      Change-Id: I31c4d7a7de2939f6004c112649f7303f0e944156
      5c207296
    • Jean-Marc Valin's avatar
      Disabling second dering filter when CLPF is enabled. · d9ad054e
      Jean-Marc Valin authored
      Low-latency:
      masterfix-ll-dering+clpf@2017-02-14T02:31:30.023Z -> masterfix-ll-dering-nosecond@2017-02-16T21:30:38.937Z
         PSNR | PSNR Cb | PSNR Cr | PSNR HVS |    SSIM | MS SSIM | CIEDE 2000
      -0.1151 | -0.2440 | -0.1287 |  -0.0454 | -0.1130 | -0.0632 |    -0.1206
      
      High-latency:
      masterfix-dering-clpf@2017-02-16T21:28:58.511Z -> dering-nosecond+clpf@2017-02-15T23:46:08.501Z
         PSNR | PSNR Cb | PSNR Cr | PSNR HVS |    SSIM | MS SSIM | CIEDE 2000
      -0.0340 | -0.0883 | -0.0130 |  -0.0104 | -0.0026 |  0.0245 |     0.0215
      
      Change-Id: I3e8f34b1971d3ec280c5695a6fcfb7d7b270b2d9
      d9ad054e
    • Angie Chiang's avatar
      Use 8tap sharp filter for UV plane · 4d4cbc9b
      Angie Chiang authored
      So far the overall performance drop by
      lowres: 0.027%
      midres: 0.049%
      hdres: roughly 0.07%
      
      Change-Id: If3dc7619d91cb97b6d494b33f36112af45efcd8f
      4d4cbc9b
    • Urvang Joshi's avatar
      aomenc: Don't print warning in quiet mode. · 51c048eb
      Urvang Joshi authored
      Change-Id: I8a23fcf0839c2c2b1d638c3e0fc9d4e5a09f1269
      51c048eb
    • Rostislav Pehlivanov's avatar
      Implement a new rate control system · 002e7b7a
      Rostislav Pehlivanov authored
      This commit implements a new rate control system which was ported from
      Daala's rate control system (which was based off of Theora's rate
      control system) to the encoder. Its aim is to address the weaknesses of
      the current rate control system and eventually serve as its replacement.
      
      This is still work in progress. So far this commit only implements
      support for single pass encoding for constant quality and bitrate
      targeting.
      Additional commits which implement two-pass support and the rest to
      match the feature set of the current rate control system are coming
      soon.
      
      The rate control system hasn't been fully tuned (and will likely need
      additional tuning as the encoder's development progresses) and does
      contain some "hacks", to convert the quality to a quantizer value
      (empirical) and to tweak the quantizer in between golden frames (which
      uses some code from the current rate control system as well as code
      which attempts to model what that code does), the latter of which is
      only in the constant quality codepath.
      
      Bitrate targeting works much better than the current rate control
      system's targeting and will actually closely match the rate specified by
      the user without the current rate control system's bursty behaviour.
      
      Change-Id: I588fbfd2e80a3d21ce7176903115d6a96ef1700a
      002e7b7a
  5. 16 Feb, 2017 2 commits
    • Thomas Davies's avatar
      NEW_TOKENSET: modify trellis and coeff costs. · ed8e2d2a
      Thomas Davies authored
      Since token coding has changed the relationship
      between EOB values and non-zero values, coeff costs
      and trellis quant need to change to be more accurate.
      
      Change-Id: I27ef400e8290db4c5faa9c21a253575eea7955c4
      ed8e2d2a
    • Joe Young's avatar
      [ext-intra] fix bug in sample interpolation when dy < 0 · e568e6f0
      Joe Young authored
      When the "dy" variable is between -1 and 0 (base2 == -1)
      we should interpolate between the upper-left(-1,-1) and left(-1,0)
      samples, instead of just taking the left sample.
      
      Coding gain improves a bit with this change.
      
      BUG=aomedia:357
      
      Change-Id: If520f71b22115e79120499c21f8d6925c1fa24be
      e568e6f0