GitLab

BUG=aomedia:386

Fix the bug by separating mask_4x4_int into mask_4x4_int_r and
mask_4x4_int_c. The horizontal and vertical filtering are now
correctly handled.

Change-Id: I2207a12c83cba3e3003e1e45c7587695ad87a691

This was being worked around by forcing highbitdepth to be off when
enabling tx64x64.

With the fixes, removed the work-around.

Change-Id: I3102f9e17d4037af96a9eff418c5af6a97fd740c

When the neighbor block is coded in sub8x8 block size, use the
bottom-right 4x4 luma block coding mode to produce obmc reference.

Change-Id: Icecccf5ddf95e8b9e65b36fdb6fa176691591a8e

Change-Id: I529a7c0868039a82f46993577471cb6c452b025b

Use CONFIG_AV1_DECODER and CONFIG_AV1_ENCODER instead.

Change-Id: I33d83aa6d31067d0db7a972d36927dc49c420f81

Use a more aggressive tail to simulate larger viewing
distances better for low value QM levels.

This does not change default QM coding (qmlevel >= 5)
or non-QM coding.

Change-Id: Ifb6fa6faf8ce9b77177c97798e08418788c53fbd

Separate the codes into a table of distinct values
and an index into that table.
Pull the SSE calculation of the RDO loop and avoid
repeating for the same alpha values.

Change-Id: I8c4bd7eab6f8000e6aca9687d9190abc3e270c37
Signed-off-by: David Michael Barr <b@rr-dav.id.au>

All matrices are derived by subsampling 32x32 and 32x16 matrices.
Inter and intra matrices now use the same matrix set.

BUG=aomedia:520

AWCY results for default setting (qm-min=5, qm-max=9):

  PSNR  | PSNR Cb | PSNR Cr | PSNR HVS | SSIM  | MS SSIM | CIEDE 2000
   2.75 |  7.98   |    -    |  -3.52   |  0.73 |   -2.21 |   4.22

Change-Id: I8414d19eaf50cfe80d4fe2290da6cdf4ebb406cb

Change-Id: I3f73ccdb82261d13580697c162b7f5c877616f32

This resolves a potential race issue in multi-threading test when
chroma-sub8x8 is enabled.

Change-Id: I443f4af10e55046b04d6d739f7594dd8bda5c830

Properly reset mi_row and mi_col values per plane.

Change-Id: Ic624f286c8ee2521403557bc1d685752166b1947

The chroma-sub8x8 is mainly designed for YUV420 format. When the
format is YUV444, it falls back to regular block size behavior.

Change-Id: Ibedc4f1d59e7bf717384ede9423f22678d54c0fa

When merging NEW_TOKENSET into EC_MULTISYMBOL a bug was introduced when
 EC_MULTISYMBOL == 1 and EC_ADAPT == 0.
This patch reverts that change and replaces CONFIG_EC_MULTISYMBOL with
 the equivalent flag (CONFIG_DAALA_EC || CONFIG_ANS).

BUG=aomedia:550

Change-Id: I164df42121ca0959247af34e65287b1d230346f7

BUG=aomedia:560

Change-Id: Ie399d61162ab33e35fa0cb04206904e3af1bbb2d

* Rename the 'masked_compound_*' functions to just 'masked_*'.
  The previous names were intended to be temporary, to distinguish
  the old and new masked motion search pipelines. But now that the
  old pipeline has been removed, we can reuse the old names.

* Simplify the new ext-inter compound motion search pipeline
  a bit.

* Harmonize names: Rename
  aom_highbd_masked_compound_sub_pixel_variance* to
  aom_highbd_8_masked_sub_pixel_variance*, to match the naming of
  the corresponding non-masked functions

Change-Id: I988768ffe2f42a942405b7d8e93a2757a012dca3

Change-Id: I0a244e3c2a8730febeede1f7f17c25978b3f4930

Also, add some asserts so that such mistakes don't happen later on.

Change-Id: I61c5f1bcb4db5903f961c94086f1103deead3d85

BUG=aomedia:557

Change-Id: Ie6a5b91460e4e47dd659ec470ffd849feb4ac8f6

Move them from build/cmake/aom_configure.cmake to the
CMakeLists.txt at the root of the repository.

Change-Id: Ib39764abe0c3456414ba157ebc18fd7a052db0df

horizontal dependent tile and tile group should be able to be enabled
indepeendently. add comment to explain the expected behavior.

Change-Id: Id6988fb9ab7a404d608ea075ba7e9faf3acd5381

Add SSE2 lowbd and SSSE3 highbd versions of the filters
introduced in https://aomedia-review.googlesource.com/c/11962/ .

These filters are equivalent in speed to the SSE2 implementations
of the regular convolve filter. The average time to filter a
64x64 block is:

lowbd C: 52us
lowbd SSE2: 5.6us
highbd C: 53us
highbd SSSE3: 5.8us

Also add a correctness test based on the warp filter tests.

Change-Id: Ia0d81100e8a414bbfc2b5f664d751cf24765299e

Patches https://aomedia-review.googlesource.com/c/11987/
and https://aomedia-review.googlesource.com/c/11988/
replaced the old masked motion search pipeline with
a new one which uses different SAD/SSE functions.
This resulted in a lot of dead code.

This patch removes the now-dead code. Note that this
includes vectorized SAD/SSE functions, which will need
to be rewritten at some point for the new pipeline. It
also includes the masked_compound_variance_* functions
since these turned out not to be used by the new pipeline.

To help with the later addition of vectorized functions, the
masked_sad/variance_test.cc files are kept but are modified
to work with the new functions. The tests are then disabled
until we actually have the vectorized functions.

Change-Id: I61b686abd14bba5280bed94e1be62eb74ea23d89

The obmc assumes minimum processing block size to be 8x8.

BUG=aomedia:554

Change-Id: Ic0415f433e8e463fffb13559703a315f317607d3

Change-Id: I4756594a6975ad0fff1f4ff64f1cf02876757f02

Use CONFIG_AV1_{DE,EN}CODER to control decoder and
encoder support inclusion instead.

BUG=aomedia:76,aomedia:508

Change-Id: Ib150ae382b301885589f30d9b6e98d3bfdd1afce

Change-Id: I3eebf3811964c682309784d9bbdfb00790fde871

This was not clamping the chroma block size to at least 4x4, even
though it is getting contexts for coding the transform residual
(which is at least 4x4). Thus it would copy too few contexts.

This is an encoder-only change. It should not change the current
encoder output, because we currently store twice as many entropy
contexts as actually required, so we'll copy 1 and then check 2 to
see if either are non-zero. However, this will break when we
eliminate the context doubling, as instead we'll copy 0 and check
1.

Change-Id: I4087529d6b3e7cd5a226746625b90494790983e6

This reverts commit 05c38874.

BUG=aomedia:553

Change-Id: Ibbfe3e357bbfb8cb7d07482755c47c64afd30092

When chroma_sub8x8 is enable the custom DC_PRED implemented in CfL uses
chroma_up_available and chroma_left_available instead of up_available
and left_available.

It was mentioned in 3da18d60 that
this fixes a rare enc/dec mismatch issue.

Change-Id: Ie8920e956962846db15e24bcf7e7eaa13ccb8c12

BUG=aomedia:76,aomedia:549

Change-Id: I692f4ad86061e53f9dc4b9a45d4dd9a8bd0d82d5

This commit resolves the encoding results disparity between single
and multi-thread encoding.

BUG=aomedia:553

Change-Id: I968972e6d53e1977384d1dfd2f006d04af074be6

Change-Id: I59f78e6fa53b794026edbba709e1c02af0f76a5f

These conditions in has_top_right() are never true when cb4x4 is
enabled.

The corresponding check in has_bottom_left() is already behind a
similar #if.

This is needed by a subsequent patch to move sub-4x4 block sizes
behind their own configuration flag, since that changes the value
of bw_unit, which might cause the condition to become true when it
should not be.

Encoder and decoder output should remain unchanged.

Change-Id: I648654dfc265f911d83668d94dc927ebc0c70771

Currently the "transform units" used to measure transform sizes
in some parts of the code are based on the smallest defined
transform size.

cb4x4 currently defines a 2x2 transform size, even when chroma_2x2
is not enabled, which means that the scale of the transform units
was always double that of MODEINFO units.

Several areas of the code were hard-coding this assumption instead
of converting from one to the other using appropriate constants.

Change-Id: Iff437425f2c5abd02a82ff1c7c8002aefc2f75a6

Currently the "transform units" used to measure transform sizes
in some parts of the code are based on the smallest defined
transform size.

cb4x4 currently defines a 2x2 transform size, even when chroma_2x2
is not enabled, which means that the scale of the transform units
was always double that of MODEINFO units.

Several areas of the code were hard-coding this assumption instead
of converting from one to the other using appropriate constants.

Change-Id: Ibc55671aa5bc3ad272cb8a036f9c4f9621df85ab

Currently the "transform units" used to measure transform sizes
in some parts of the code are based on the smallest defined
transform size.

cb4x4 currently defines a 2x2 transform size, even when chroma_2x2
is not enabled, which means that the scale of the transform units
was always double that of MODEINFO units.

Several areas of the code were hard-coding this assumption instead
of converting from one to the other using appropriate constants.

Change-Id: I86057b85b7d4cd810d87da28f5eedc5b27597e29

reset_skip_context() was always clearing the entropy contexts for
all three color planes, using a block size that corresponded with
the luma plane.

However, when chroma_2x2 is disabled, then for sub-8x8 luma block
sizes, the corresponding chroma block size is always 4x4, and the
skip flag only affects the chroma blocks corresponding to the
upper-left luma block.

This patch makes reset_skip_context() reset the contexts that
actually correspond to the chroma blocks that are skipped (if any).
It also moves reset_skip_context() to av1_reset_skip_context() in
blockd.c, because blockd.h gets included before onyx_int.h, which
declares the required is_chroma_reference() function.
reset_skip_context() was too large and used in too many places to
be a reasonable candidate for inlining, anyway.

AWCY results on objective-1-fast:

cb4x4-fix-base@2017-05-11T06:26:50.159Z -> cb4x4-fix-reset_skip@2017-05-11T06:28:45.482Z
  PSNR | PSNR Cb | PSNR Cr | PSNR HVS |   SSIM | MS SSIM | CIEDE 2000
0.0301 |  0.1068 |  0.1463 |   0.0359 | 0.0260 |  0.0347 |     0.0479

A regression (near the noise range), but without this fix, the line
buffer size required by the entropy contexts will be doubled.

Change-Id: I12fa6e60d9c1c7c85927742775a346ea22b3193f

Create named constants for the minimum TX_SIZE used in the luma
plane, as well as the minimum allowed TX_SIZE for which we have to
explicitly code a selection (i.e., one larger than the minimum luma
TX_SIZE).

Then, use these constants consistently with tx_size_to_depth() to
index the tx_size counts in FRAME_COUNTS, and also consistently use
TX_SIZE named constants to index the tx_size_implied counts.

Failing to index these counts correctly can, e.g., cause tx_mode to
be chosen incorrectly.

Change-Id: I706a62a33e2282e67c97a68bade87fb8023ec13b

Clear the clang warnings when var-tx is enabled.

Change-Id: I6b005124159b0607ec3284cc2e5ba287745a2541

BUG=aomedia:545

Change-Id: I8beacce0f87b52dfd614bcd8c88426839c4ba51d