This patch eliminates the intermediate diff buffer usage by
combining the short idct and the add residual into one function.
The encoder can use the same code as well.

Change-Id: I296604bf73579c45105de0dd1adbcc91bcc53c22

These building blocks enable rate-distortion optimization search
over block sizes of 8x4 and 4x8. Need to convert them into mmx/sse
forms.

Change-Id: I570ea2d22d14ceec3fe3575128d7dfa172a577de

This commit allows proper transform type (DCT/ADST) selection in
the settings of partition 4x4 level.

Change-Id: Iec6f922a46480d777e7ca9142a99e8c131f0077b

This commit allows the rate-distortion optimization recursion
at encoder to go down to 4x4 block size. It deprecates the use
of I4X4_PRED and SPLITMV syntax elements from bit-stream
writing/reading. Will remove the unused probability models in
the next patch.

The partition type search and bit-stream are now capable of
supporting the rectangular partition of 8x8 block, i.e., 8x4
and 4x8. Need to revise the rate-distortion parts to get these
two partition tested in the rd loop.

Change-Id: I0dfe3b90a1507ad6138db10cc58e6e237a06a9d6

Allow motion search multiple times iteratively, and break out
the loop if this search couldn't find better motion vectors.
Limit the maximum number of search to 2.

Tests results:
1. stdhd set: 0.311%(overall psnr); 0.346%(ssim).
positive gain on 10 out of 16 clips(best: 2.746% on sunflower;
worst: -0.434% on old_town_cross).
2. derf set: 0.016%(overall psnr); 0.062%(ssim).
positive gain on half of the clips(best: 0.499% on bowing;
worst: -0.387 on city).

Change-Id: Ibf0a51776d4caf7707be0586346db08128117559

Change band calculation back to simpler model based
on the order in which coefficients are coded in scan order
not the absolute coefficient positions.

With the scatter scan experiment enabled the results were
appear broadly neutral on derf (-0.028) but up a little on std-hd +0.134).

Without the scatterscan experiment on the results were up derf as well.

Change-Id: Ie9ef03ce42a6b24b849a4bebe950d4a5dffa6791

Use 4x4 block coding for UV components arbitrarily in I4X4_PRED and
SPLITMV coding modes. This is a temporary solution to enable
bit-stream support for recursive partition down to 4x4 block size.
Will separate the functionalities of 4x4 block coding rate-distortion
out from those of superblocks.

Change-Id: I03dc15d5897014f175f3f2c91e9b266091d56797

mdcounts seems no longer used.

Change-Id: Idd8162e8acfa3f5be7a18767156cc79ccbc2bdee

In current code, motion vectors got from single prediction mode are used
in compound prediction mode directly. These motion vectors may not give
accurate prediction since they are searched independently. In this patch,
we took Pascal's suggestion, and did joint motion search in compound
prediction mode to find better motion vectors in this situation.
Test results:
Overall PSNR: 0.570%(derf), 0.918%(stdhd);
SSIM: 0.572%(derf), 1.009%(stdhd);

The encoder is a little slower. This can be improved since some c
code is used in motion search.

Change-Id: Ib30c9240f6c56c9b070867b4ca89412a76d9f3c6

Change-Id: I49527ff8dd8bef1074c18a964fed2a575f0b118a

Change-Id: I4374b5af40ee9082ddf7956a9756a15ad9ad5436

Makes the temporary storage of the filtered data agnostic to
the number of planes and how they're subsampled.

Change-Id: I12f352cd69a47ebe1ac622af30db29b49becb7f4

Delete code under the CONFIG_CODE_ZEROGROUP flag.

Change-Id: I5fe6c7b42a5da9b73118e33594301da4129f320a

Change-Id: I71311a14f8d7f48508b250f25d1d0914c6a1ac72

Delete code under the CONFIG_COMP_INTERINTRA_PRED
flag.

Change-Id: I3d1079cf46305c08f7e11d738596ea112e7b547f

Clean out code relating to newbintramode.

Change-Id: Ie91f4f156cdf60ce0da8ca407c1c9cb00c7d0705

Macro ab4x4 contains experiments for recursive partition down to
4x4 block size.

Change-Id: Ic727842fa98a4df9fd51e0025a545dc76a5c76c1

Use unified function pointers to variance_.

Change-Id: I78891bede56e73306851808d96f09dc0d3d8074e

Code previously set up the pointers by scaling by MI_UV_SIZE, which
is 4:2:0 only.

Change-Id: Ic13a92895cff018ec1345736746ed84cb31e6e31

Pull sb8x8 out of experimental list. verified via borg run tests.
Fixed unit test failures.

Change-Id: I12a4bbd17395930580c048ab68becad1ffe46e76

Iterating over all planes in the loop instead of custom y,uv code inside
handle_inter_mode function.

Change-Id: I301f9276d6d544c2fd7203d84f1318ac80ea625d

Disable the use of scaled reference frame for motion search in
SPLITMV mode. This fixes the unit test failure issue triggered
when merging sb8x8 from experimental list.

Change-Id: I02ac25fd8db8d5762f8fee29513b947189875fa0

Change-Id: I1df17f45721c690d157800daa6a0b377e3d32bc2

This allows removing a large number of transform size specific functions,
as well as supporting 444/alpha by routing all code through the
subsampling-aware path.

Change-Id: Ieb085cebe9f37f24fc24de179898b22abfda08a4

Change-Id: I61ef1f198c876f9f79787ea7d7385a862cfbae19

Change-Id: I51c53692b1150005645bf362c5e5a8275178a8fd

Change-Id: I07aa89a67e0ac5f99ef0c448553dbc46b0ed27f2

Change-Id: I390bb1cedc835f439fd5dd6cda6572b29cbb139c

Work-in-progress, not yet ready for review. TODO items:
- bitstream writing (encoder) and reading (decoder)
- decoder reconstruction

Change-Id: I5afb7284e7e0480847b47cd0097cb469433c9081

Moving code from vp9_pack_bitstream to new function encode_segmentation.

Change-Id: I1f1e59a1f038618ad95162b7db4b6f8164850ea8

Output changes slightly because of a minor bug in (at least) the sb32x16
block2above tx16x16 tables that previously existed in vp9_blockd.c.

Change-Id: I624af28ac200a8322d64454cf05c79e9502968cc

Change-Id: I3a6d601e90e8740b9c26dd0afbfe9d467b75d367

Change-Id: I087e08e7909a406b71715b8525c104208daa6889

All members can be referenced from their per-plane counterparts, and
removes assumptions about 24 blocks per macroblock.

Change-Id: I7ff2fa72d22c29163eb558981c8193765a8113d9

Access these members from MACROBLOCKD instead.

Change-Id: I7907230dd473ff12ebe182b9280d8b7f12a888c4

This originally was "Removed update_blockd_bmi()".  Now,
this patch removed bmi from blockd and uses the bmi found
in mode_info_context.  Eliminates unnecessary bmi copies between
blockd and mode_info_context.

Change-Id: I287a4972974bb363f49e528daa9b2a2293f4bc76

There were 4 variants of the quantize loop in vp9_quantize.c, now
there is 1.

Change-Id: Ic853393411214b32d46a6ba53769413bd14e1cac

Change-Id: I552d53f7e7331e9246d8a32d6c6dcc0cfa0cbeb0

Basic assumption: when talking about transform units, use b_; when
talking about macroblock indices, use mb_.

Change-Id: Ifd163f595d4924ff892de4eb0401ccd56dc81884

Access these members from MACROBLOCKD instead.

Change-Id: I2574622e577bb9feede47f6b7ccbb11f3e928ca8