1. 27 Jun, 2012 1 commit
    • Adrian Grange's avatar
      Added Prediction Filter to Mode Selection · bbc926dc
      Adrian Grange authored
      Added the ability to optionally filter the prediction data
      when inter modes are selected (excludes SPLITMV, for now).
      
      The mode selection loop considers both the filtered and
      non-filtered prediction data when choosing mode. The filter
      can be turned on/off at the frame-level, or signaled for
      each MB.
      
      Change-Id: I1b783c71d95a361ab36c761b07e8a6b06bc36822
      bbc926dc
  2. 15 May, 2012 1 commit
    • Ronald S. Bultje's avatar
      Rewrite reference frame costing in the RD loop. · 0b8a95a0
      Ronald S. Bultje authored
      I now see I didn't write a very long description, so let's do it
      here then. We took a pretty big quality hit (0.1-0.2%) from my
      recent fix of the inversion of arguments to vp8_cost_bit() in the
      RD reference frame costing. I looked into it and basically the
      costing prevented us from switching reference frames. This is of
      course silly, since each frame codes its own prob_intra_coded, so
      using last frame cost indications as a limiting factor can never
      be right.
      
      Here, I've rewritten that code to estimate costings based partially
      on statistics from progress on current frame encoding. Overall,
      this gives us a ~0.2%-0.3% improvement over what we had previously
      before my argument-inversion-fix, and thus about ~0.4% over current
      git (on derf-set), and a little more (0.5-1.0%) on HD/STD-HD/YT.
      
      Change-Id: I79ebd4ccec4d6edbf0e152d9590d103ba2747775
      0b8a95a0
  3. 12 Apr, 2012 1 commit
    • Yaowu Xu's avatar
      a set of minor fixes · 636b2f38
      Yaowu Xu authored
      This commit tries to address an issue related to the oddity shown on
      HD _mobcal clip, where some rather ugly blocks shown in the second
      frame at low-mid bit rates if the third frame is not made a key frame
      by he encoder. The fixes include: 1)  made calls to sad_16x16 to be
      consistent with function prototype. 2) remove the error bias to intra
      and golden in mbgraph search. 3) changed the error accumulation on
      inter_segment encoding to avoid potential out-of-range. 1) has no
      effect on encoding results.
      
      Encoding test show that the overall effect of the commit helps about
      .2%(HD) to .3%(cif)
      
      Change-Id: I930975a2d0c06252f01c39e0a02351529774e30b
      636b2f38
  4. 11 Apr, 2012 1 commit
    • Adrian Grange's avatar
      Superblock encoding order · 9daf3154
      Adrian Grange authored
      This is the first patch to add superblock (32x32) coding
      order capabilities. It does not yet do any mode selection
      at the SB level, that will follow in a further patch.
      
      This patch encodes rows of SBs rather than
      MBs, each SB contains 2x2 MBs.
      
      Two intra prediction modes have been disabled since they
      require reconstructed data for the above-right MB which
      may not have been encoded yet (e.g. for the bottom right
      MB in each SB).
      
      Results on the one test clip I have tried (720p GIPS clip)
      suggest that it is somewhere around 0.2dB worse than the
      baseline version, so there may be bugs.
      
      It has been tested with no experiments enabled and with
      the following 3 experiments enabled:
        --enable-enhanced_interp
        --enable-high_precision_mv
        --enable-sixteenth_subpel_uv
      in each case the decode buffer matches the recon buffer
      (using "cmp" to compare the dumped/decoded frames).
      Note: Testing these experiments individually created
      errors.
      
      Some problems were found with other experiments but it
      is unclear what state these experiments are in:
        --enable-comp_intra_pred
        --enable-newentropy
        --enable-uvintra
      
      This code has not been extensively tested yet, so there
      is every likelihood that further bugs remain. I also
      intend to do some code cleanup & refactoring in tandem
      with the next patch that adds the 32x32 modes.
      
      Change-Id: I1eba7f740a70b3510df58db53464535ef881b4d9
      9daf3154
  5. 01 Mar, 2012 1 commit
  6. 28 Feb, 2012 1 commit
    • Deb Mukherjee's avatar
      Initial refactoring of high_precision mv code. · 3e1cad9c
      Deb Mukherjee authored
      This is the first patch for refactoring of the code related to
      high-precision mv, so that 1/4 and 1/8 pel motion vectors can
      co-exist in the same bit-stream by use of a frame level flag.
      The current patch works fine for only use of 1/4th and
      only use of 1/8th pel mv, but there are some issues with the
      mode switching in between. Subsequent patches on this change Id
      will fix the remaining issues.
      
      Patch 2: Adds fixes to make sure that multiple mv precisions can
      co-exist in the bit-stream. Frame level switching has been tested
      to work correctly.
      
      Patch 3: Fixes lines exceeding 80 char
      
      Patch 4:
      http://www.corp.google.com/~debargha/vp8_results/enhinterp.html
      
      Results on derf after ssse3 bugfix, compared to everything
      enabled but the 8-tap, 1/8-subpel and 1/16-subpel uv. Overall the
      gains are about 3% now. Hopefully there are no more bugs lingering.
      Apparently the sse3 bug affected the quartel subpel results more than
      the eighth pel ones (which is understandabale because one bad predictor
      due to the bug, matters less if there are a lot more subpel options
      available as in the 1/8 subpel case).
      The results in the 4th column correspond to the current settings.
      The first two columns correspond to two settings of adaptive switching
      of the 1/4 or 1/8 subpel mode based on initial Q estimate. These
      do not work as good as just using 1/8 all the time yet.
      
      Change-Id: I3ef392ad338329f4d68a85257a49f2b14f3af472
      3e1cad9c
  7. 03 Feb, 2012 1 commit
    • Paul Wilkins's avatar
      Reference frame prediction: · f0459549
      Paul Wilkins authored
      Extended prediction and coding of reference frame where
      a subset of options are flagged as available at the segment level.
      
      Updated copyright notices.
      
      Switch to SAD in mbgraph code as SATD problematic for the
      foreground and background separation as it can ignore large DC shifts.
      
      Change-Id: I661dbbb2f94f3ec0f96bb928c1655e5e415a7de1
      f0459549
  8. 26 Jan, 2012 1 commit
  9. 18 Jan, 2012 1 commit
  10. 17 Jan, 2012 1 commit
    • Paul Wilkins's avatar
      Rate control on static scenes plus Y2dc delta Q fix. · cf561bad
      Paul Wilkins authored
      A problem can arise on static clips with force key frames where
      attempts to avoid popping lead to a progressive reduction in key
      frame Q that ultimately may lead to unexpected overspend against
      the  rate target.
      
      The changes in this patch help to insure that in such clips the
      quality of the key frames across the clip is more uniform (rather
      than starting bad and getting better - especially at low target rates).
      
      This patch also includes a fix that removes a delta on the Y2DC
      when the baseline q index < 4 as this is no longer needed.
      
      There is also a fix to try and prevent repeat single step Q adjustment in
      the recode loop leading to lots of recodes, especially where the use
      of forced skips as part of segmentation has made the impact of Q on
      the number of bits generated much smaller.
      
      Patch 2: Amend "last_boosted_qindex" calculation for arf overlay frames.
      
      Change-Id: Ia1feeb79ed8ed014e4239994fcf5e58e68fd9459
      cf561bad
  11. 23 Dec, 2011 1 commit
  12. 09 Dec, 2011 1 commit
    • Adrian Grange's avatar
      Fix out of bounds read in update_mbgraph_frame_stats · 95b4cf05
      Adrian Grange authored
      update_mbgraph_frame_stats used xd->mode_info_context
      before it had been setup, resulting in potentially
      random accesses of uninitialized memory.
      
      This fix allocates a local MODE_INFO structure to hold
      the data generated in the function.
      
      Change-Id: Ic9e75610008ce0e2d690e8e583c21582fee6fc45
      95b4cf05
  13. 28 Nov, 2011 1 commit
  14. 24 Oct, 2011 2 commits
    • Paul Wilkins's avatar
      Segmentation Features; · 23701f4f
      Paul Wilkins authored
      Only encode sign bit for feature data that can have a sign.
      
      Tweaks to the test segmentation rules so that it now actually gives
      a net benefit on the derf set of about 0.4% though much higher
      on some clips at the low end.
      
      Change-Id: I8e61f1aebf41c9037db7e67e2f8975aa18a0c986
      23701f4f
    • Paul Wilkins's avatar
      Further segment feature extensions. · 01ce04bc
      Paul Wilkins authored
      This quite large check in includes the following:
      
      Merge in some code from Ronald (mbgraph.c) that scans a Gf/arf group.
      This is used as a basis for a simple segmentation for the normal frames
      in a gf/arf group. This code also uses satd functions from Yaowu.
      
      Adds functionality for coding the latest possible position of an EOB for
      blocks in the segment. (Currently 0-15 only, hence just for 4x4 dct).
      Where the EOB position is 0 this acts like "skip" and the normal coding
      of skip at the per mb level is disabled.
      
      Added functions (seg_common.c) for setting and reading segment feature
      elements. These may want to be optimized away at some point but while the
      mecahnism is in a state of flux they provide a single location for making
      changes and keep things a bit cleaner.
      
      This is still proof of concept code. Currently the tested feature set:-
      
      Quantizer,
      Loop Filter level,
      Reference frame,
      Prediction Mode,
      EOB end stop.
      
      TBD:-
      
      Add functions for setting and reading the feature data with range
      and validity checking.
      
      Handling of signed and unsigned feature data. At the moment all is assumed
      to be signed and a sign bit is coded but many cannot be negative.
      
      Correct handling of EOB feature with intra coded blocks.
      
      Testing/trapping of legal/illegal ref frame and mode combinations.
      
      Transform size switch plus merge and test with 8c8 DCT work
      
      Merge and test with Sumans Segmenation coding optimizations
      
      Change-Id: Iee12e83661c7abbd1e0ce6810915eb4ec35e2d8e
      01ce04bc