The conversion script was incorrectly matching
CONFIG_POSTPROC[_VISUALIZER] and generating an
incorrect vpx_config.asm

Match both PROC and ENDP on word boundaries

Change-Id: Ic2788c3b522d4ee0afc5223b72e1b09fb52645be

Aligned the image buffer and stride to 32 bytes. This enables
calling of optimized scaler function in libyuv, and improves
the performance.

Tested libyuv scaler(x86 optimization) on Linux and Windows,
including: Linux 32/64bit, visual studio 32/64bit, Cygwin, and
MinGW32.

Also, fixed a wrong pointer in vpx_codec_encode().

Change-Id: Ibe97d7a0a745f82c43852fa4ed719be5a4db6abc

Change-Id: I4168eb6ea22ae541471738a7a3453e7d52059275

The previous definition of uintptr_t was incorrect on x64 with MSVC.
Also, the ARMV6 version of int_fast16_t was defined as unsigned for
some reason. Since the fast types are currently unused, just remove
them.

Change-Id: Idd73f77a989c77feedcb4a6802ae6bd37324ed40

Removed unnecessary transposes.

Change-Id: I029fbaf8afafee34d54a4f3333c22023c15003c3

Do the test filtering in the existing backup frame buffer instead of
the original. Copy the original data into extra buffer before doing
the  filtering. This way there is no need to restore the original
unfiltered  frame at the end of level picking process.

This came up in some discussions with Johann. Thanks!

Change-Id: I495f4301d983854673276c34ec0ddf9a9d622122

Added code to allocate aligned image buffer in vpx_img_alloc(). The
alignment of the buffer and stride is determined by the parameter
align.

Change-Id: Idc866978484be3558551c56df39130ab7f74ddd4

The example encoder down-samples the input video frames a number of
times with a down-sampling factor, and then encodes and outputs
bitstreams with different resolutions.

Support arbitrary down-sampling factor, and down-sampling factor
can be different for each encoding level.

For example, the encoder can be tested as follows.
1. Configure with multi-resolution encoding enabled:
../libvpx/configure --target=x86-linux-gcc --disable-codecs
--enable-vp8 --enable-runtime_cpu_detect --enable-debug
--disable-install-docs --enable-error-concealment
--enable-multi-res-encoding
2. Run make
3. Encode:
If input video is 1280x720, run:
./vp8_multi_resolution_encoder 1280 720 input.yuv 1.ivf 2.ivf 3.ivf 1
(output: 1.ivf(1280x720); 2.ivf(640x360); 3.ivf(320x180).
The last parameter is set to 1/0 to show/not show PSNR.)
4. Decode:
./simple_decoder 1.ivf 1.yuv
./simple_decoder 2.ivf 2.yuv
./simple_decoder 3.ivf 3.yuv
5. View video:
mplayer 1.yuv -demuxer rawvideo -rawvideo w=1280:h=720 -loop 0 -fps 30
mplayer 2.yuv -demuxer rawvideo -rawvideo w=640:h=360 -loop 0 -fps 30
mplayer 3.yuv -demuxer rawvideo -rawvideo w=320:h=180 -loop 0 -fps 30

The encoding parameters can be modified in vp8_multi_resolution_encoder.c,
for example, target bitrate, frame rate...

Modified API. John helped a lot with that. Thanks!

Change-Id: I03be9a51167eddf94399f92d269599fb3f3d54f5

dynamicly assign ARG_CTRL_CNT_MAX and
add check to make sure argument instance
doesnt already exist before creating a duplicate

Change-Id: I4f78a9c5346cda8e812cd89c077afe8996493508

This value needs to be copied to each thread's data structure.
This fixed artifact problem in multi-thread encoder.

Change-Id: Iab6d9745a1d44846aa503184705376f63a505597

In Change I83202ffd, I deleted one too many lines.

Change-Id: If05d7c8988eb5c00898dc7c833ad7d99b5eb23e7

to the dqcoeff or qcoeff buffer.  The encoder would
populate the dc coeffs of the y blocks as a separate
stage (recon_dcblock) and the decoder would use a special
version of the idct.  This change eliminates the extra copy
and reduces the code footprint.

[Tero] Added needed changes to armv6 and NEON assembly.

Change-Id: I83202ffdbaf83f6e5dd69f4ba2519fcf0b13b3ba

API was not returning correct partition sizes on arm targets.
The armv5 token packing functions were not storing the information to the
partition size table.
As a fix, have one boolcoder instance allocated for each partition so
that partition sizes are internally available after all partitions
were encoded. This will also allow more flexibility in producing
several partitions in parallel.

Use buffer validation (overflow check) in all ARM bitpacking
functions.

Change-Id: I31c8a11d8a7613676f0ff50928cb2a2ab14fd169

Change-Id: Id3388985d754706b9fd1f079c47121e79a63efdf

Storing vp8_bilinear_filters_mmx in an mmx file and using it in an sse2
file is bad

Moving towards allowing --disable-mmx

Change-Id: I20493b35bdedcdcfc0915e6f05fdbe6c81a4a742

There was an implicit reference frame test order (typically LAST,
GOLD, ARF) in the mode selection logic, but this doesn't provide the
expected results when some reference frames are disabled. For
instance, in real-time mode, the speed selection logic often disables
the ARF modes. So if the user disables the LAST and GOLD frames, the
encoder was always choosing INTRA, when in reality searching the ARF
in this case has the same speed penalty as searching LAST would have
had.

Instead, introduce the notion of a reference frame search order. This
patch preserves the former priorities, so if a frame is disabled, the
other frames bump up a slot to take its place. This patch lays the
groundwork for doing something smarter in the frame test order, for
example considering temporal distance or looking at the frames used by
nearby blocks.

Change-Id: I1199149f8662a408537c653d2c021c7f1d29a700

Extend buffer write validation (overflow check) to single token
partition packing, both mb and row based functions.

Change-Id: I36e19b7d37fc43712d05c70e3ad223d3eb5b973d

Change-Id: I22c547af80e0bce0c7b5f6054ad0aa61f37d717b

Patch set 2: 64 bit build fix
Patch set 3: 64 bit crash fix

[Tero]
Patch set 4: Updated ARMv6 and NEON assembly.
             Added also minor NEON optimizations to subtract
             functions.

Patch set 5: x86 stride bug fix

Change-Id: I1fcca93e90c89b89ddc204e1c18f208682675c15

libvpx builds and runs correctly when built with x86_64-w64-mingw32-gcc
Version tested: 4.6.1

Change-Id: I9aa953d615551ca4834c9a5f8b68778d032a6cf5

This code is Copyright The WebM Project Authors, not only Google.

Change-Id: Ib5a9dec4ba3177ccb2b06dcfe9605d2b3a3a3d8b

The calculated frame_rate is a state variable in the codec, and
shouldn't be maintained in the configuration struct. Move it to the
main part of cpi so that it isn't clobbered when the configuration
struct is updated. The initial framerate estimate is moved from the
vp8_cx_iface.c wrapper into the body of init_config() in onyx_if.c, so
that it is only called once and not reset on every call to
vp8_change_config().

Change-Id: I8d9a3d1283330d1ee297d07e9d78d1f2875f2465

Correct ifdef check for Visual Studio's compiler, mingw builds can use
unistd.h.

Change-Id: I25c5ee46ef75ffbff03f560293dfb3d6bed55f70