1. 11 Oct, 2010 1 commit
    • Timothy B. Terriberry's avatar
      Remove INTRARDOPT #define and intra_rd_opt option. · dd08db93
      Timothy B. Terriberry authored
      This is just eliminating some cruft.
      Although a number of variables are declared only when INTRARDOPT
       is defined, they are used elsewhere without that protection, and
       no longer just for intra RDO.
      The intra_rd_opt flag was hard-coded to 1 and never checked.
      
      Change-Id: I83a81554ecee8053e7b4ccd8aa04e18fa60f8e4f
      dd08db93
  2. 07 Oct, 2010 1 commit
  3. 06 Oct, 2010 1 commit
    • Yaowu Xu's avatar
      optimize fast_quantizer c version · d338d14c
      Yaowu Xu authored
      As the zbin and rounding constants are normalized, rounding effectively
      does the zbinning, therefore the zbin operation can be removed. In
      addition, the memset on the two arrays are no longer necessary.
      
      Change-Id: If39c353c42d7e052296cb65322e5218810b5cc4c
      d338d14c
  4. 04 Oct, 2010 2 commits
    • Jan Kratochvil's avatar
      nasm: address labels 'rel label' vice 'wrt rip' · 5cdc3a4c
      Jan Kratochvil authored
      nasm does not support `label wrt rip', it requires `rel label'. It is
      still fully compatible with yasm.
      
      Provide nasm compatibility. No binary change by this patch with yasm on
      {x86_64,i686}-fedora13-linux-gnu. Few longer opcodes with nasm on
      {x86_64,i686}-fedora13-linux-gnu have been checked as safe.
      
      Change-Id: I488773a4e930a56e43b0cc72d867ee5291215f50
      5cdc3a4c
    • Jan Kratochvil's avatar
      nasm: match instruction length (movd/movq) to parameters · e114f699
      Jan Kratochvil authored
      nasm requires the instruction length (movd/movq) to match to its
      parameters. I find it more clear to really use 64bit instructions when
      we use 64bit registers in the assembly.
      
      Provide nasm compatibility. No binary change by this patch with yasm on
      {x86_64,i686}-fedora13-linux-gnu. Few longer opcodes with nasm on
      {x86_64,i686}-fedora13-linux-gnu have been checked as safe.
      
      Change-Id: Id9b1a5cdfb1bc05697e523c317a296df43d42a91
      e114f699
  5. 02 Oct, 2010 2 commits
    • Paul Wilkins's avatar
      Tune effect of motion on KF/GF boost in two pass; · 788c0eb5
      Paul Wilkins authored
      This code adjust the impact of the amount and speed of motion
      on GF and KF boost.
      
      Sections with lots of slow motion will tend to have a
      somewhat bigger boost and sections with fast motion may
      have less.
      
      There is a knock on effect to the selection of the active
      quantizer range.
      
      This will likely require further tuning but helps with a couple
      of particularly bad edge cases.
      
      Change-Id: Ic2449cda7305672b69acf42fc0a845b77ac98d40
      788c0eb5
    • Yaowu Xu's avatar
      enable trellis quantization for 2nd order blocks · dcd29e36
      Yaowu Xu authored
      Experimented with different value for Y2_RD_MULT ranging f[1, 32],
      without adapting the value to MB coding mode/frame type/Q value,
      4 works out best among all values, providing overall 0.1% coding
      gain on the test set.
      
      Change-Id: I6b2583a8aa5db5e7e5c65c646301909c0c58f876
      dcd29e36
  6. 01 Oct, 2010 1 commit
  7. 29 Sep, 2010 5 commits
    • John Koleszar's avatar
      Rename mode_ref_lf_test_function · 7e5e3151
      John Koleszar authored
      This function graduated from being a test func to something that's on
      by default. Rename it and remove some spurious comments that confuse
      its status.
      
      Change-Id: I689695a3ad29c35e9a72a43ec93766733ac6c20b
      7e5e3151
    • John Koleszar's avatar
      Fix loopfilter delta zero transitions · b9be7a46
      John Koleszar authored
      Loopfilter deltas are initialized to zero on keyframes in the decoder.
      The values then persist from the previous frame unless an update bit
      is set in the bitstream. This data is not included in the entropy
      data saved by the 'refresh entropy' bit in the bitstream, so it is
      effectively an additional contextual element beyond the 3 ref-frames
      and the entropy data.
      
      The encoder was treating this delta update bit as update-if-nonzero,
      meaning that the value would be refreshed even if it hadn't changed,
      and more significantly, if the correct value for the delta changed
      to zero, the update wouldn't be sent, and the decoder would preserve
      the last (presumably non-zero) value.
      
      This patch updates the encoder to send an update only if the value
      has changed from the previously transmitted value. It also forces the
      value to be transmitted in error resilient mode, to account for lost
      context in the event of lost frames.
      
      Change-Id: I56671d5b42965d0166ac226765dbfce3e5301868
      b9be7a46
    • Paul Wilkins's avatar
      Change to coefficient optimization rules. · 7288cdf7
      Paul Wilkins authored
      Allow coefficient optimization for good quality speed 0.
      
      Change-Id: Id0cb363df6823c6798671584fbba097916a7df2c
      7288cdf7
    • Adrian Grange's avatar
      Moved row-specific computation of MV bounds out of col loop · 0e7c45b3
      Adrian Grange authored
      Moved the bounds computation on vertical MV component out
      of the loop that processes MBs within a MB row.
      0e7c45b3
    • Paul Wilkins's avatar
      Control of active min quantizer for two pass. · ff3068d6
      Paul Wilkins authored
      Create  look up tables for controlling the active quantizer range.
      Some initial tuning to improve quality circa 0.5% on test set.
      Clean up of some stats output code
      
      Change-Id: Ia698a8525f8b8129a503cadace3ee73fe888f543
      ff3068d6
  8. 28 Sep, 2010 2 commits
  9. 27 Sep, 2010 1 commit
  10. 24 Sep, 2010 1 commit
    • John Koleszar's avatar
      disable compilation of debugging code · 8ca779ab
      John Koleszar authored
      This patch avoids compiling some debugging code in onyx_if.c. The most
      significant fix is to avoid generating code for vp8_write_yuv_frame,
      which is never called. Some other code was removed by the dead code
      elimination performed by the compiler, and this patch does it with the
      preprocessor instead. There are advantages both ways.
      
      Change-Id: I044fd43179d2e947553f0d6f2cad5b40907ac458
      8ca779ab
  11. 16 Sep, 2010 1 commit
    • John Koleszar's avatar
      Reduce size of tokenizer tables · 147b125b
      John Koleszar authored
      This patch reduces the size of the global tables maintained by the
      tokenizer to 16k from 80k-96k. See issue #177.
      
      Change-Id: If0275d5f28389af11ac83c5d929d1157cde90fbe
      147b125b
  12. 09 Sep, 2010 2 commits
    • John Koleszar's avatar
      Fix GF interval for non-lagged ARFs · edcbb1c1
      John Koleszar authored
      When ARFs are enabled in non-lagged compress modes, the GF interval
      was being reset to zero. Non-lagged ARF updates were enabled in commit
      63ccfbd5, but this incorrect GF interval caused a quality regression.
      
      Change-Id: I615c3b493f4ce2127044f4e68d0bcb07d6b730c3
      edcbb1c1
    • John Koleszar's avatar
      Use WebM in copyright notice for consistency · c2140b8a
      John Koleszar authored
      Changes 'The VP8 project' to 'The WebM project', for consistency
      with other webmproject.org repositories.
      
      Fixes issue #97.
      
      Change-Id: I37c13ed5fbdb9d334ceef71c6350e9febed9bbba
      c2140b8a
  13. 08 Sep, 2010 2 commits
    • Jim Bankoski's avatar
      Skip unnecessary search of identical frames · 69ae8f47
      Jim Bankoski authored
      vp8_get_compressed_data() was defeating logic in
      encode_frame_to_datarate() that determined the reference buffers to
      search and forcing all frames to be eligible to search. In cases
      where buffers have identical contents, this is unnecessary extra
      work.
      
      Change-Id: I9e667ac39128ae32dc455a3db4c62e3efce6f114
      69ae8f47
    • Jim Bankoski's avatar
      Enable ARFs for non-lagged compress · 63ccfbd5
      Jim Bankoski authored
      ARFs were explicitly disabled except in lagged compress mode. New
      ARF logic allows for the ARF buffer to hold an older golden frame,
      which does not require lagged compress.
      
      Change-Id: I1dff82b6f53e8311f1e0514b1794ae05919d5f79
      63ccfbd5
  14. 03 Sep, 2010 1 commit
    • Scott LaVarnway's avatar
      Reduced the size of MB_MODE_INFO · 0de458f6
      Scott LaVarnway authored
      Moved partition_bmi and partition_count out of MB_MODE_INFO and
      placed into MACROBLOCK.  Also reduced the size of other members
      of the MB_MODE_INFO struct.  For 1080p, the memory was reduced
      by 1,209,516 bytes.  The decoder performance appeared to improve
      by 3% for the clip used.
      Note:  The main goal for this change is to improve the decoder
      performance.  The encoder will be revisited at a later date for
      further structure cleanup.
      
      Change-Id: I4733621292ee9cc3fffa4046cb3fd4d99bd14613
      0de458f6
  15. 02 Sep, 2010 2 commits
  16. 31 Aug, 2010 2 commits
    • Paul Wilkins's avatar
      Improved Force Key Frame Behaviour · c239a1b6
      Paul Wilkins authored
      These changes improve the behaviour of the code with
      forced key frames sent in by a calling application.
      
      The sizing of the frames is still suboptimal for two pass in
      particular but the behaviour is much better than it was.
      
      Change-Id: I35fae610c67688ccc69d11f385e87dfc884e65a1
      c239a1b6
    • Scott LaVarnway's avatar
      Changed above and left context data layout · e85e6315
      Scott LaVarnway authored
      The main reason for the change was to reduce cycles in the token
      decoder. (~1.5% gain for 32 bit)  This layout should be more
      cache friendly.
      
      As a result of this change, the encoder had to be updated.
      
      Change-Id: Id5e804169d8889da0378b3a519ac04dabd28c837
      Note: dixie uses a similar layout
      e85e6315
  17. 20 Aug, 2010 1 commit
    • John Koleszar's avatar
      increase rate control buffer level precision · 8e7ebacb
      John Koleszar authored
      The external API exposes the RC initial/optimal/full buffer level in
      milliseconds, but this value was truncated internally to seconds. This
      patch allows the use of the full precision during the conversion from
      time to bits.
      
      Change-Id: If8dd2a87614c05747f81432cbe75dd9e6ed2f04e
      8e7ebacb
  18. 13 Aug, 2010 1 commit
    • John Koleszar's avatar
      move segmentation_common to encoder · 80d3923a
      John Koleszar authored
      vp8_update_gf_useage_maps() is only used by the encoder. This patch
      fixes the ability to build in decode-only or encode-only
      configurations.
      
      Change-Id: I3a5211428e539886ba998e09e8abd747ac55c9aa
      80d3923a
  19. 12 Aug, 2010 1 commit
    • Scott LaVarnway's avatar
      Removed unnecessary MB_MODE_INFO copies · 9c7a0090
      Scott LaVarnway authored
      These copies occurred for each macroblock in the encoder and decoder.
      Thetemp MB_MODE_INFO mbmi was removed from MACROBLOCKD.  As a result,
      a large number compile errors had to be fixed.
      
      Change-Id: I4cf0ffae3ce244f6db04a4c217d52dd256382cf3
      9c7a0090
  20. 11 Aug, 2010 6 commits
    • John Koleszar's avatar
      cosmetics: add missing 2D array braces · d22e2968
      John Koleszar authored
      Silences compile warning.
      
      Change-Id: I4b207d97f8570fe29aa2710e4ce4f02e7e43b57a
      d22e2968
    • John Koleszar's avatar
      avoid negative array subscript warnings · 392a9582
      John Koleszar authored
      The mv_ref and sub_mv_ref token encodings are indexed from NEARESTMV
      and LEFT4X4, respectively, rather than being zero-based like the
      other token encodings.
      
      Change-Id: I3699c3f84111209ecfb91097c4b900773e9a3ad5
      392a9582
    • Scott LaVarnway's avatar
      Moved gf_active code to encoder only · 99f46d62
      Scott LaVarnway authored
      The gf_active code is only used by the encoder, so it was moved from
      common and decoder.
      
      Change-Id: Iada15acd5b2b33ff70c34668ca87d4cfd0d05025
      99f46d62
    • Yaowu Xu's avatar
      Removed duplicate functions · c404fa42
      Yaowu Xu authored
      Change-Id: Ie587972ccefd3c762b8cdf8ef39345cd22924b9b
      c404fa42
    • Yaowu Xu's avatar
      Normalize quantizer's zero bin and rounding factors · 3b95a46c
      Yaowu Xu authored
      This patch changes a few numbers in the two constant arrays
      for quantizer's zerobin and rounding factors, in general to
      make the sum of the two factors for any Q to be 128.  While
      it might be beneficial to calibrate the two arrays for best
      quantizer performance, it is not the purpose of this patch.
      Normalizing the two arrays will enable quick optimization
      of the current faster quantizer, i.e .zerobin check can be
      removed.
      
      Change-Id: If9abfd7929bf4b8e9ecd64a79d817c6728c820bd
      3b95a46c
    • Timothy B. Terriberry's avatar
      Add trellis quantization. · 8fa38096
      Timothy B. Terriberry authored
      Replace the exponential search for optimal rounding during
       quantization with a linear Viterbi trellis and enable it
       by default when using --best.
      Right now this operates on top of the output of the adaptive
       zero-bin quantizer in vp8_regular_quantize_b() and gives a small
       gain.
      It can be tested as a replacement for that quantizer by
       enabling the call to vp8_strict_quantize_b(), which uses
       normal rounding and no zero bin offset.
      Ultimately, the quantizer will have to become a function of lambda
       in order to take advantage of activity masking, since there is
       limited ability to change the quantization factor itself.
      However, currently vp8_strict_quantize_b() plus the trellis
       quantizer (which is lambda-dependent) loses to
       vp8_regular_quantize_b() alone (which is not) on my test clip.
      
      Patch Set 3:
      
      Fix an issue related to the cost evaluation of successor
      states when a coefficient is reduced to zero. With this
      issue fixed, now the trellis search almost exactly matches
      the exponential search.
      
      Patch Set 2:
      
      Overall, the goal of this patch set is to make "trellis"
      search to produce encodings that match the exponential
      search version. There are three main differences between
      Patch Set 2 and 1:
      a. Patch set 1 did not properly account for the scale of
      2nd order error, so patch set 2 disable it all together
      for 2nd blocks.
      b. Patch set 1 was not consistent on when to enable the
      the quantization optimization. Patch set 2 restore the
      condition to be consistent.
      c. Patch set 1 checks quantized level L-1, and L for any
      input coefficient was quantized to L. Patch set 2 limits
      the candidate coefficient to those that were rounded up
      to L. It is worth noting here that a strategy to check
      L and L+1 for coefficients that were truncated down to L
      might work.
      
      (a and b get trellis quant to basically match the exponential
      search on all mid/low rate encodings on cif set, without
      a, b, trellis quant can hurt the psnr by 0.2 to .3db at
      200kbps for some cif clips)
      (c gets trellis quant  to match the exponential search
      to match at Q0 encoding, without c, trellis quant can be
      1.5 to 2db lower for encodings with fixed Q at 0 on most
      derf cif clips)
      
      Change-Id:	Ib1a043b665d75fbf00cb0257b7c18e90eebab95e
      8fa38096
  21. 02 Aug, 2010 2 commits
    • Jan Kratochvil's avatar
      nasm: end labels with colon (':') · 0327d3df
      Jan Kratochvil authored
      Labels should end by colon (':'), nasm requires it.
      
      Provide nasm compatibility.  No binary change by this patch with yasm
      on {x86_64,i686}-fedora13-linux-gnu.  Few longer opcodes with nasm on
      {x86_64,i686}-fedora13-linux-gnu have been checked as safe.
      
      Change-Id: I0b2ec6f01afb061d92841887affb5ca0084f936f
      0327d3df
    • Jan Kratochvil's avatar
      nasm: use OWORD vs DQWORD · c8134bc5
      Jan Kratochvil authored
      nasm knows only OWORD.  yasm knows both OWORD and DQWORD.
      
      Provide nasm compatibility.  No binary change by this patch with yasm on
      {x86_64,i686}-fedora13-linux-gnu.  Few longer opcodes with nasm on
      {x86_64,i686}-fedora13-linux-gnu have been checked as safe.
      
      Change-Id: I62151390089e90df9a7667822fa594ac20b00e78
      c8134bc5
  22. 28 Jul, 2010 1 commit
    • Yaowu Xu's avatar
      Enable the switch between two versions of quantizer · f95c80b6
      Yaowu Xu authored
      To facilitate more testing related to quantizer and rate
      control, the old version quantizer is added back. old and
      new quantizer can be switched back and forth by define or
      un-define the macro "EXACT_QUANT".
      
      Change-Id: Ia77e687622421550f10e9d65a9884128a79a65ff
      f95c80b6
  23. 27 Jul, 2010 1 commit
    • Johann's avatar
      x86/sse2: disable asm quantizer · a570bbd4
      Johann authored
      follow up to Change I0e51492d: neon: disable asm quantizer
      
      Now x86 doesn't segfault with --disable-runtime-cpu-detect and -p=2
      
      Change-Id: I8ca127bb299198efebbcbd5a661e81788361933f
      a570bbd4