1. 22 May, 2013 1 commit
    • Deb Mukherjee's avatar
      Using 128 entry look up table for coef models · de4d682c
      Deb Mukherjee authored
      Reverts to using 128 bit LUT for the coef models rather than 48
      to ease hardware implementation.
      
      Also incorporates some cleanups including removing various
      hooks to support different lookup tables based on block_type and
      ref_type.
      
      Change-Id: I54100c120cca07a2ebd3a7776bc4630fa6a153f6
      de4d682c
  2. 21 May, 2013 1 commit
  3. 20 May, 2013 1 commit
    • Deb Mukherjee's avatar
      Updating the model coef experiment · 39a90bc8
      Deb Mukherjee authored
      Cleans up the experiment. Actually uses reduced counts for backward
      updates, and reduced number of probabilities in the context.
      
      No change in bitstream when the experiment is on.
      
      Between expt on and off:
      derfraw300 is down only -0.062% (which is better than when expts
      were run previously).
      
      Change-Id: I55285a049a0c22810bdb42914212ab5a4f8521b5
      39a90bc8
  4. 14 May, 2013 1 commit
    • Jingning Han's avatar
      Enable recursive partition down to 4x4 · 1f26840f
      Jingning Han authored
      This commit allows the rate-distortion optimization recursion
      at encoder to go down to 4x4 block size. It deprecates the use
      of I4X4_PRED and SPLITMV syntax elements from bit-stream
      writing/reading. Will remove the unused probability models in
      the next patch.
      
      The partition type search and bit-stream are now capable of
      supporting the rectangular partition of 8x8 block, i.e., 8x4
      and 4x8. Need to revise the rate-distortion parts to get these
      two partition tested in the rd loop.
      
      Change-Id: I0dfe3b90a1507ad6138db10cc58e6e237a06a9d6
      1f26840f
  5. 13 May, 2013 1 commit
    • Paul Wilkins's avatar
      Change to band calculation. · e5f71520
      Paul Wilkins authored
      Change band calculation back to simpler model based
      on the order in which coefficients are coded in scan order
      not the absolute coefficient positions.
      
      With the scatter scan experiment enabled the results were
      appear broadly neutral on derf (-0.028) but up a little on std-hd +0.134).
      
      Without the scatterscan experiment on the results were up derf as well.
      
      Change-Id: Ie9ef03ce42a6b24b849a4bebe950d4a5dffa6791
      e5f71520
  6. 07 May, 2013 2 commits
  7. 04 May, 2013 1 commit
    • John Koleszar's avatar
      Remove old_block_idx_4x4 · acc9c125
      John Koleszar authored
      Removes several instances where the old block numbering was
      still in use.
      
      Change-Id: Id35130591455a4abe6844613e45c0b70c1220c08
      acc9c125
  8. 30 Apr, 2013 1 commit
    • Ronald S. Bultje's avatar
      sb8x8 integration in rd loop. · d068d869
      Ronald S. Bultje authored
      Work-in-progress, not yet ready for review. TODO items:
      - bitstream writing (encoder) and reading (decoder)
      - decoder reconstruction
      
      Change-Id: I5afb7284e7e0480847b47cd0097cb469433c9081
      d068d869
  9. 29 Apr, 2013 3 commits
    • John Koleszar's avatar
      Use foreach_transformed_block with tokenize_b · 5c24469c
      John Koleszar authored
      Updates the tokenizer to use the common block walker used by the
      detokenizer, to support non-4:2:0 and more than 3 planes.
      
      Change-Id: If1854117a9c7c1427349209fa2b3051ce6459dcb
      5c24469c
    • Jingning Han's avatar
      Immigrate tokenize_mb into tokenize_sb · 3ac3c469
      Jingning Han authored
      Unify the tokenize_ function and enable configurable block size for
      superblock 8x8. We are immigrating the functionalities of
      macroblock handles into superblock ones, and eventually will remove
      encode_mb and decode_mb. To be continued on detokenize_ module.
      
      Change-Id: I9f81e8c2291082535cf5e0c4b662eb24fb7c8a7f
      3ac3c469
    • Ronald S. Bultje's avatar
      Change above/left_context to use an 8x8 basis. · 2dbaa4f4
      Ronald S. Bultje authored
      Output changes slightly because of a minor bug in (at least) the sb32x16
      block2above tx16x16 tables that previously existed in vp9_blockd.c.
      
      Change-Id: I624af28ac200a8322d64454cf05c79e9502968cc
      2dbaa4f4
  10. 25 Apr, 2013 1 commit
  11. 24 Apr, 2013 1 commit
  12. 23 Apr, 2013 1 commit
  13. 22 Apr, 2013 3 commits
  14. 19 Apr, 2013 1 commit
  15. 18 Apr, 2013 1 commit
  16. 17 Apr, 2013 2 commits
  17. 16 Apr, 2013 2 commits
  18. 11 Apr, 2013 4 commits
  19. 10 Apr, 2013 1 commit
    • Ronald S. Bultje's avatar
      Make SB coding size-independent. · a3874850
      Ronald S. Bultje authored
      Merge sb32x32 and sb64x64 functions; allow for rectangular sizes. Code
      gives identical encoder results before and after. There are a few
      macros for rectangular block sizes under the sbsegment experiment; this
      experiment is not yet functional and should not yet be used.
      
      Change-Id: I71f93b5d2a1596e99a6f01f29c3f0a456694d728
      a3874850
  20. 05 Apr, 2013 1 commit
    • John Koleszar's avatar
      Move EOB to per-plane data · 05a79f2f
      John Koleszar authored
      Continue migrating data from BLOCKD/MACROBLOCKD to the per-plane
      structures.
      
      Change-Id: Ibbfa68d6da438d32dcbe8df68245ee28b0a2fa2c
      05a79f2f
  21. 04 Apr, 2013 1 commit
  22. 28 Mar, 2013 2 commits
    • Deb Mukherjee's avatar
      Framework changes in nzc to allow more flexibility · fe9b5143
      Deb Mukherjee authored
      The patch adds the flexibility to use standard EOB based coding
      on smaller block sizes and nzc based coding on larger blocksizes.
      The tx-sizes that use nzc based coding and those that use EOB based
      coding are controlled by a function get_nzc_used().
      By default, this function uses nzc based coding for 16x16 and 32x32
      transform blocks, which seem to bridge the performance gap
      substantially.
      
      All sets are now lower by 0.5% to 0.7%, as opposed to ~1.8% before.
      
      Change-Id: I06abed3df57b52d241ea1f51b0d571c71e38fd0b
      fe9b5143
    • Ronald S. Bultje's avatar
      Fix mix-up in pt token indexing. · 9eea9fa2
      Ronald S. Bultje authored
      This fixes uninitialized reads in the trellis, and probably makes the
      trellis do something again.
      
      Change-Id: Ifac8dae9aa77574bde0954a71d4571c5c556df3c
      9eea9fa2
  23. 26 Mar, 2013 3 commits
    • Ronald S. Bultje's avatar
      Add col/row-based coefficient scanning patterns for 1D 8x8/16x16 ADSTs. · d9094d8f
      Ronald S. Bultje authored
      These are mostly just for experimental purposes. I saw small gains (in
      the 0.1% range) when playing with this on derf.
      
      Change-Id: Ib21eed477bbb46bddcd73b21c5c708a5b46abedc
      d9094d8f
    • Ronald S. Bultje's avatar
      Redo banding for all transforms. · 3120dbdd
      Ronald S. Bultje authored
      Now that the first AC coefficient in both directions use the same DC
      as their context, there no longer is a purpose in letting both have
      their own band. Merging these two bands allows us to split bands for
      some of the very high-frequency AC bands.
      
      In addition, I'm redoing the banding for the 1D-ADST col/row scans. I
      don't think the old banding made any sense at all (it merged the last
      coefficient of the first row/col in the same band as the first two of
      the second row/col), which was clearly an oversight from the band being
      applied in scan-order (rather than in their actual position). Now,
      coefficients at the same position will be in the same band, regardless
      what scan order is used. I think this makes most sense for the purpose
      of banding, which is basically "predict energy for this coefficient
      depending on the energy of context coefficients" (i.e. pt).
      
      After full re-training, together with previous patch, derf gains about
      1.2-1.3%, and hd/stdhd gain about 0.9-1.0%.
      
      Change-Id: I7a0cc12ba724e88b278034113cb4adaaebf87e0c
      3120dbdd
    • Ronald S. Bultje's avatar
      Use above/left (instead of previous in scan-order) as token context. · 790fb132
      Ronald S. Bultje authored
      Pearson correlation for above or left is significantly higher than for
      previous-in-scan-order (absolute values depend on position in scan, but
      in general, we gain about 0.1-0.2 by using either above or left; using
      both basically just makes this even better). For eob branch skipping,
      we continue to use the previous token in scan order.
      
      This helps about 0.9% on derf after re-training on a limited data set.
      Full re-training and results on larger-resolution clips are pending.
      
      Note that this commit breaks trellis, so we can probably get further
      gains out of it by fixing trellis at some later point.
      
      Change-Id: Iead68e296fc3a105cca746b5e3da9555d6010cfe
      790fb132
  24. 18 Mar, 2013 1 commit
  25. 09 Mar, 2013 1 commit
    • Deb Mukherjee's avatar
      Continued experiment with nonzero count · a28139c8
      Deb Mukherjee authored
      Adds probability updates for extra bits for the nzcs, code for
      getting nzc stats, plus some minor cleanups and fixes.
      
      Change-Id: If2814e7f04fb52f5025ad9f400f3e6c50a00b543
      a28139c8
  26. 07 Mar, 2013 2 commits
    • Ronald S. Bultje's avatar
      Re-add support for ADST in superblocks. · d3724abe
      Ronald S. Bultje authored
      This also changes the RD search to take account of the correct block
      index when searching (this is required for ADST positioning to work
      correctly in combination with tx_select).
      
      Change-Id: Ie50d05b3a024a64ecd0b376887aa38ac5f7b6af6
      d3724abe
    • Deb Mukherjee's avatar
      Coding con-zero count rather than EOB for coeffs · eb6ef241
      Deb Mukherjee authored
      This patch revamps the entropy coding of coefficients to code first
      a non-zero count per coded block and correspondingly remove the EOB
      token from the token set.
      
      STATUS:
      Main encode/decode code achieving encode/decode sync - done.
      Forward and backward probability updates to the nzcs - done.
      Rd costing updates for nzcs - done.
      Note: The dynamic progrmaming apporach used in trellis quantization
      is not exactly compatible with nzcs. A suboptimal approach has been
      used instead where branch costs are updated to account for changes
      in the nzcs.
      
      TODO:
      Training the default probs/counts for nzcs
      
      Change-Id: I951bc1e22f47885077a7453a09b0493daa77883d
      eb6ef241