1. 14 Aug, 2012 1 commit
    • Yaowu Xu's avatar
      Changed to use reference mv as nearest mv · e52e8b70
      Yaowu Xu authored
      The reference motion vector selected by surrounding pixels that has
      the best matching score is used as nearest motion vector.
      
      The change has shown consistent gain on all test sets, compression
      gains range from .2% to .6%. The variation is largely dependent on
      various other experiments on or off.
      
      Change-Id: I5552e1c2f6fc57c3e8818a5ee41ffda89af05e75
      e52e8b70
  2. 07 Aug, 2012 1 commit
    • Yaowu Xu's avatar
      a new way of determining reference motion vector · 8b2f57d0
      Yaowu Xu authored
      Using surrounding reconstructed pixels from left and above to select
      best matching mv to use as reference motion vector for mv encoding.
      
      Test results:
             AVGPSNR  GLBPSNR VPXSSIM
      Derf:  1.107%   1.062%  0.992%
      Std-hd:1.209%   1.176%  1.029%
      
      Change-Id: I8f10e09ee6538c05df2fb9f069abcaf1edb3fca6
      8b2f57d0
  3. 03 Aug, 2012 2 commits
    • Jingning Han's avatar
      Replacing the 8x8 DCT with 8x8 ADST/DCT for I8x8 · fcbff9ee
      Jingning Han authored
      Fixed the code review comments.
      
      Under the htrans8x8 experiment the 8X8 DCT in the
      I8X8 mode is replaced with a combination of 8X8 ADST and
      DCT.
      
      Overall coding gains with the htrans8x8 experiment are:
      derf:   0.486
      std-hd: 1.040
      hd:     1.063
      yt:     0.506
      
      Note that part of the gain comes from bigger transforms
      (8x8 instead of 4x4) and part comes from replacing the DCT
      wth the ADST.
      
      Change-Id: I92ca6bbfce11b4165d612b81d9adfad4d010c775
      fcbff9ee
    • Daniel Kang's avatar
      16x16 DCT blocks. · fed8a183
      Daniel Kang authored
      Set on all 16x16 intra/inter modes
      
      Features:
      - Butterfly fDCT/iDCT
      - Loop filter does not filter internal edges with 16x16
      - Optimize coefficient function
      - Update coefficient probability function
      - RD
      - Entropy stats
      - 16x16 is a config option
      
      Have not tested with experiments.
      
      hd:     2.60%
      std-hd: 2.43%
      yt:     1.32%
      derf:   0.60%
      
      Change-Id: I96fb090517c30c5da84bad4fae602c3ec0c58b1c
      fed8a183
  4. 02 Aug, 2012 1 commit
    • Jingning Han's avatar
      Use 8x8 DCT transform for I8X8 prediction mode · c7846ebc
      Jingning Han authored
      Apply 2D-DCT transform of dimension 8x8 to encode prediction
      residuals of I8X8 mode.
      Brought back block type 3 probability context model for 8x8 tokens,
      which is used for the coefficients of Y blocks in I8x8 modes. The
      coefficient costs estimate of I8X8 mode in rate-distortion is also
      changed appropriately.
      Performance results:
      derf:   0.246
      yt:     0.114
      std-hd: 0.730
      hd:     0.670
      
      Change-Id: If1d970eeb4e1827c9f0d2c5b27d33089b347ea27
      c7846ebc
  5. 27 Jul, 2012 1 commit
    • Deb Mukherjee's avatar
      Merges several experiments · 9984a155
      Deb Mukherjee authored
      The following five experiments are merged:
      
      newentropy
      newupdate
      adaptive_entropy (also includes a couple of parameter changes
                        that improves results a little
                        in common/entropymode.c and encoder/modecosts.c
                        that were not merged from the internal branch)
      newintramodes
      expanded_coef_context
      
      Change-Id: I8a142a831786ee9dc936f22be1d42a8bced7d270
      9984a155
  6. 23 Jul, 2012 1 commit
  7. 19 Jul, 2012 1 commit
    • Jingning Han's avatar
      Adds hybrid transform · 9824230f
      Jingning Han authored
      Adds ADST/DCT hybrid transform coding for Intra4x4 mode.
      The ADST is applied to directions in which the boundary
      pixels are used for prediction, while DCT applied to
      directions without corresponding boundary prediction.
      
      Adds enum TX_TYPE in b_mode_infor to indicate the transform
      type used.
      
      Make coding style consistent with google style.
      Fixed the commented issues.
      
      Experimental results in terms of bit-rate reduction:
      derf:   0.731%
      yt:     0.982%
      std-hd: 0.459%
      hd:     0.725%
      
      Will be looking at 8x8 transforms next.
      
      Change-Id: I46dbd7b80dbb3e8856e9c34fbc58cb3764a12fcf
      9824230f
  8. 17 Jul, 2012 1 commit
  9. 12 Jun, 2012 1 commit
    • Yaowu Xu's avatar
      Added the ability to accumulate coef stats across encodings · bb25083d
      Yaowu Xu authored
      This commit added the ability to accumulate the coef stats across
      different encodings using an intermediate binary stats files. The
      accumulation happens only the binary stats file exists in current
      directory. The encoder needs to be built with "ENTROPY_STATS" to
      allow the output. The commit also fixed a few formating issues in
      output stats file.
      
      Change-Id: Ib1a41180aa554845cf51e4421a230b128a3a82b4
      bb25083d
  10. 08 May, 2012 1 commit
    • Yaowu Xu's avatar
      a number of fixes to entropy stats collection · 54cf1d9a
      Yaowu Xu authored
      1. block types
      There are only three types of blocks for 8x8 transformed MBs, i.e. Y
      block with DC does not exist for 8x8 transformed MBs as all MB using
      8x8 transform have 2nd order haar transform. This commit introduced
      a new macro BLOCK_TYPES_8X8 to reflect such fact.
      
      2. context counters
      This commit also fixed the mixed of context_counters between 4x4 and
      8x8 transformed MBs. The mixed use of the counters leads me to think
      the existing the context probabilities were not properly generated
      from 8x8 transformed MBs.
      
      3. redundant collecting in recoding
      The commit also corrected the code that accumulates entropy stats by
      making sure stats only collected for final packing, not during the
      recode loop
      
      Change-Id: I029f09f8f60bd0c3240cc392ff5c6d05435e322c
      54cf1d9a
  11. 04 May, 2012 1 commit
  12. 21 Mar, 2012 1 commit
  13. 15 Mar, 2012 1 commit
    • Yaowu Xu's avatar
      WebM Experimental Codec Branch Snapshot · 6035da54
      Yaowu Xu authored
      This is a code snapshot of experimental work currently ongoing for a
      next-generation codec.
      
      The codebase has been cut down considerably from the libvpx baseline.
      For example, we are currently only supporting VBR 2-pass rate control
      and have removed most of the code relating to coding speed, threading,
      error resilience, partitions and various other features.  This is in
      part to make the codebase easier to work on and experiment with, but
      also because we want to have an open discussion about how the bitstream
      will be structured and partitioned and not have that conversation
      constrained by past work.
      
      Our basic working pattern has been to initially encapsulate experiments
      using configure options linked to #IF CONFIG_XXX statements in the
      code. Once experiments have matured and we are reasonably happy that
      they give benefit and can be merged without breaking other experiments,
      we remove the conditional compile statements and merge them in.
      
      Current changes include:
      * Temporal coding experiment for segments (though still only 4 max, it
        will likely be increased).
      * Segment feature experiment - to allow various bits of information to
        be coded at the segment level. Features tested so far include mode
        and reference frame information, limiting end of block offset and
        transform size, alongside Q and loop filter parameters, but this set
        is very fluid.
      * Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used
        in MBs using 16x16 prediction modes within inter frames.
      * Compound prediction (combination of signals from existing predictors
        to create a new predictor).
      * 8 tap interpolation filters and 1/8th pel motion vectors.
      * Loop filter modifications.
      * Various entropy modifications and changes to how entropy contexts and
        updates are handled.
      * Extended quantizer range matched to transform precision improvements.
      
      There are also ongoing further experiments that we hope to merge in the
      near future: For example, coding of motion and other aspects of the
      prediction signal to better support larger image formats, use of larger
      block sizes (e.g. 32x32 and up) and lossless non-transform based coding
      options (especially for key frames). It is our hope that we will be
      able to make regular updates and we will warmly welcome community
      contributions.
      
      Please be warned that, at this stage, the codebase is currently slower
      than VP8 stable branch as most new code has not been optimized, and
      even the 'C' has been deliberately written to be simple and obvious,
      not fast.
      
      The following graphs have the initial test results, numbers in the
      tables measure the compression improvement in terms of percentage. The
      build has  the following optional experiments configured:
      --enable-experimental --enable-enhanced_interp --enable-uvintra
      --enable-high_precision_mv --enable-sixteenth_subpel_uv
      
      CIF Size clips:
      http://getwebm.org/tmp/cif/
      HD size clips:
      http://getwebm.org/tmp/hd/
      (stable_20120309 represents encoding results of WebM master branch
      build as of commit#7a159071)
      
      They were encoded using the following encode parameters:
      --good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63
      --end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999
      --kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50
      --minsection-pct=0 --maxsection-pct=800 --sharpness=0
      --arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF)
      --arnr-type=3
      
      Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c
      6035da54
  14. 05 Mar, 2012 1 commit
  15. 01 Mar, 2012 1 commit
  16. 16 Feb, 2012 1 commit
    • Yaowu Xu's avatar
      Reworked context conversion between 8x8 and 4x4 · b92a96d8
      Yaowu Xu authored
      The commit rationized and simplified the entropy context conversion
      betwen MB using 8x8 transform and MB using 4x4 transform. The old version
      had a number of weirdness in how 4x4 transform MB's context is used for
      8x8 blocks other than the first 8x8 within a MB.
      
      Test showed the change has a gain ~.1% for avg psnr, glb psnr and ssim on
      the limited HD set.
      
      Change-Id: I774536c416baa6845aa741f956d8a69fa40e5d47
      b92a96d8
  17. 10 Feb, 2012 2 commits
    • Yaowu Xu's avatar
      fixed an issue related to 2nd order size due to merge artifacts. · 9ded6e37
      Yaowu Xu authored
      For 8x8 transformed macroblock, the 2nd order transform is a 2x2 haar
      transform, here there is only 4 coefficients total. A previous merge
      changed these to 64, causing crashes when encoding with 8x8 transform
      enabled. (i.e. when input video image size > 640x360 ) This commit
      reverts them back to 4 and fixes the crashes.
      
      Change-Id: I3290b81f8c0d32c7efec03093a61ea57736c0550
      9ded6e37
    • Ronald S. Bultje's avatar
      Improved coding using 8x8 transform · f64725a0
      Ronald S. Bultje authored
      In summary, this commit encompasses a series of changes in attempt to
      improve the 8x8 transform based coding to help overall compression
      quality, please refer to the detailed commit history below for what
      are the rationale underly the series of changes:
      
      a. A frame level flag to indicate if 8x8 transform is used at all.
      b. 8x8 transform is not used for key frames and small image size.
      c. On inter coded frame, macroblocks using modes B_PRED, SPLIT_MV
      and I8X8_PRED are forced to using 4x4 transform based coding, the
      rest uses 8x8 transform based coding.
      d. Encoder and decoder has the same assumption on the relationship
      between prediction modes and transform size, therefore no signaling
      is encoded in bitstream.
      e. Mode decision process now calculate the rate and distortion scores
      using their respective transforms.
      
      Overall test results:
      1. HD set
      http://www.corp.google.com/~yaowu/no_crawl/t8x8/HD_t8x8_20120206.html
      (avg psnr: 3.09% glb psnr: 3.22%, ssim: 3.90%)
      2. Cif set:
      http://www.corp.google.com/~yaowu/no_crawl/t8x8/cif_t8x8_20120206.html
      (avg psnr: -0.03%, glb psnr: -0.02%, ssim: -0.04%)
      It should be noted here, as 8x8 transform coding itself is disabled
      for cif size clips, the 0.03% loss is purely from the 1 bit/frame
      flag overhead on if 8x8 transform is used or not for the frame.
      
      ---patch history for future reference---
      Patch 1:
      this commit tries to select transform size based on macroblock
      prediction mode. If the size of a prediction mode is 16x16, then
      the macroblock is forced to use 8x8 transform. If the prediction
      mode is B_PRED, SPLITMV or I8X8_PRED, then the macroblock is forced
      to use 4x4 transform. Tests on the following HD clips showed mixed
      results: (all hd clips only used first 100 frames in the test)
      
      http://www.corp.google.com/~yaowu/no_crawl/t8x8/hdmodebased8x8.html
      http://www.corp.google.com/~yaowu/no_crawl/t8x8/hdmodebased8x8_log.html
      
      while the results are mixed and overall negative, it is interesting to
      see 8x8 helped a few of the clips.
      
      Patch 2:
      this patch tries to hard-wire selection of transform size based on
      prediction modes without using segmentation to signal the transform size.
      encoder and decoder both takes the same assumption that all macroblocks
      use 8x8 transform except when prediciton mode is B_PRED, I8X8_PRED or
      SPLITMV. Test results are as follows:
      
      http://www.corp.google.com/~yaowu/no_crawl/t8x8/cifmodebase8x8_0125.html
      http://www.corp.google.com/~yaowu/no_crawl/t8x8/hdmodebased8x8_0125log.html
      
      Interestingly, by removing the overhead or coding the segmentation, the
      results on this limited HD set have turn positive on average.
      
      Patch 3:
      this patch disabled the usage of 8x8 transform on key frames, and kept the
      logic from patch 2 for inter frames only. test results on HD set turned
      decidedly positive with 8x8 transform enabled on inter frame with 16x16
      prediction modes: (avg psnr: .81% glb psnr: .82 ssim: .55%)
      
      http://www.corp.google.com/~yaowu/no_crawl/t8x8/hdintermode8x8_0125.html
      results on cif set still negative overall
      
      Patch 4:
      continued from last patch, but now in mode decision process, the rate and
      distortion estimates are computed based on 8x8 transform results for MBs
      with modes associated with 8x8 transform. This patch also fixed a problem
      related to segment based eob coding when 8x8 transform is used. The patch
      significantly improved the results on HD clips:
      
      http://www.corp.google.com/~yaowu/no_crawl/t8x8/hd8x8RDintermode.html
      (avg psnr: 2.70% glb psnr: 2.76% ssim: 3.34%)
      results on cif also improved, though they are still negative compared to
      baseline that uses 4x4 transform only:
      http://www.corp.google.com/~yaowu/no_crawl/t8x8/cif8x8RDintermode.html
      (avg psnr: -.78% glb psnr: -.86% ssim: -.19%)
      
      Patch 5:
      This patch does 3 things:
      a. a bunch of decoder bug fixes, encodings and decodings were verified
      to have matched recon buffer on a number of encodes on cif size mobile and
      hd version of _pedestrian.
      b. the patch further improved the rate distortion calculation of MBS that
      use 8x8 transform. This provided some further gain on compression.
      c. the patch also got the experimental work SEG_LVL_EOB to work with 8x8
      transformed macroblock, test results indicates it improves the cif set
      but hurt the HD set slightly.
      
      Tests results on HD clips:
      http://www.corp.google.com/~yaowu/no_crawl/t8x8/HD_t8x8_20120201.html
      (avg psnr: 3.19% glb psnr: 3.30% ssim: 3.93%)
      
      Test results on cif clips:
      http://www.corp.google.com/~yaowu/no_crawl/t8x8/cif_t8x8_20120201.html
      (avg psnr: -.47% glb psnr: -.51% ssim: +.28%)
      
      Patch 6:
      Added a frame level flag to indicate if 8x8 transform is allowed at all.
      temporarily the decision is based on frame size, can be optimized later
      one. This get the cif results to basically unchanged, with one bit per
      frame overhead on both cif and hd clips.
      
      Patch 8:
      Rebase and Merge to head by PGW.
      Fixed some suspect 4s that look like hey should be 64s in regard
      to segmented EOB. Perhaps #defines would be bette.
      Bulit and tested without T8x8 enabled and produces unchanged
      output.
      
      Patch 9:
      Corrected misalligned code/decode of "txfm_mode" bit.
      Limited testing for correct encode and decode with
      T8x8 configured on derf clips.
      
      Change-Id: I156e1405d25f81579d579dff8ab9af53944ec49c
      f64725a0
  18. 09 Feb, 2012 1 commit
  19. 07 Dec, 2011 1 commit
    • Yaowu Xu's avatar
      Removed #if CONFIG_I8X8 · d37cd976
      Yaowu Xu authored
      This commit removed the macro CONFIG_I8X8, which was used to indicate
      the 8x8 intra prediction experiment, made the change fully merged in.
      
      Change-Id: Iafa4443781ce6e83f5591c12ba615a0e92ce0ea0
      d37cd976
  20. 02 Dec, 2011 1 commit
    • Yaowu Xu's avatar
      enabled 8x8 intra prediction modes on inter frames · a8fbab86
      Yaowu Xu authored
      This commit enabled the usage of 8x8 intra prediction modes on inter
      frames. There are a few TODO items related to this: 1)baseline entropy
      need be calibrated; 2)cost of UV need to be done more properly rather
      than using decision only relying on Y; 3)Threshold for allowing picking
      8x8 intra prediction should be lowered to lower than the B_PRED.
      
      Even with all the TODOs, tests showed consistent gain on derf set ~0.1%
      (PSNR:0.08% and SSIM:0.14%). It is assumed that 8x8 intra prediction
      will help more on large resolution clips, especially with above TODOs
      addressed.
      
      Change-Id: I398ada49dfc32575cfab962a569c2885111ae3ba
      a8fbab86
  21. 01 Dec, 2011 1 commit
    • Yaowu Xu's avatar
      added transform type to MB_MODE_INFO · bba710fc
      Yaowu Xu authored
      this commit is to add an variable in the macroblock level mode
      info structure to track the transform size used in each MB, so
      the information can be used later in the loop filter to change
      how loop filter works on MBs with different transform sizes.
      
      Change-Id: Id0eeaba6cc854c6d1be00ed8d237b3d9e250e447
      bba710fc
  22. 08 Nov, 2011 1 commit
    • Paul Wilkins's avatar
      Segment signaling of TX size · a9df4183
      Paul Wilkins authored
      Initial attempt at using new segment feature signaling
      to indicate 4x4 or 8x8 transform.
      
      needs --enable-experimental --enable-t8x8
      
      Note this is work in progress.
      
      Change-Id: Ib160d46a5d810307bfcbc79853ce1a65b5b870b7
      a9df4183
  23. 04 Nov, 2011 1 commit
    • Paul Wilkins's avatar
      Segment Feature Data Access · a258bba1
      Paul Wilkins authored
      No change to functionality or output.
      
      Updates to the segment feature data structure now all done
      through functions such as set_segdata() and get_segdata()
      in seg_common.c.
      
      The reason for this is to make changing the structures (if needed)
      and debug easier.
      
      In addition it provides a single location for subsequent addition
      of range and validity checks. For  example valid combination of
      mode and reference frame.
      
      Change-Id: I2e866505562db4e4cb6f17a472b25b4465f01add
      a258bba1
  24. 03 Nov, 2011 1 commit
    • Paul Wilkins's avatar
      Segment Features. Removal of #ifdefs · a10a268e
      Paul Wilkins authored
      Removal of configure #ifdefs so that segment features
      always available. Removal of code supporting old
      segment feature method.
      
      Still a good deal of tidying up to do.
      
      Change-Id: I397855f086f8c09ab1fae0a5f65d9e06d2e3e39f
      a10a268e
  25. 31 Oct, 2011 1 commit
    • Paul Wilkins's avatar
      Segmentation Entropy and tweaks. · 795c6dd2
      Paul Wilkins authored
      Some correction for entropy impact of segment signaled (EOB and ref frame)
      
      Other slight tweaks.
      
      Derf VBR average gain now over 1% (best over 7%)
      One YT test clip has gains of circa 30% (VBR)
      
      There is still an issue with noisy clips where making the background static
      and coded with 0,0 can have a negative effect, especially at low Q.
      This is probably because of the loss of smoothing by fractional pixel filters.
      
      Change-Id: I7a225613c98067b96f8fc7a7e36f95d465b2b834
      795c6dd2
  26. 24 Oct, 2011 1 commit
    • Paul Wilkins's avatar
      Further segment feature extensions. · 01ce04bc
      Paul Wilkins authored
      This quite large check in includes the following:
      
      Merge in some code from Ronald (mbgraph.c) that scans a Gf/arf group.
      This is used as a basis for a simple segmentation for the normal frames
      in a gf/arf group. This code also uses satd functions from Yaowu.
      
      Adds functionality for coding the latest possible position of an EOB for
      blocks in the segment. (Currently 0-15 only, hence just for 4x4 dct).
      Where the EOB position is 0 this acts like "skip" and the normal coding
      of skip at the per mb level is disabled.
      
      Added functions (seg_common.c) for setting and reading segment feature
      elements. These may want to be optimized away at some point but while the
      mecahnism is in a state of flux they provide a single location for making
      changes and keep things a bit cleaner.
      
      This is still proof of concept code. Currently the tested feature set:-
      
      Quantizer,
      Loop Filter level,
      Reference frame,
      Prediction Mode,
      EOB end stop.
      
      TBD:-
      
      Add functions for setting and reading the feature data with range
      and validity checking.
      
      Handling of signed and unsigned feature data. At the moment all is assumed
      to be signed and a sign bit is coded but many cannot be negative.
      
      Correct handling of EOB feature with intra coded blocks.
      
      Testing/trapping of legal/illegal ref frame and mode combinations.
      
      Transform size switch plus merge and test with 8c8 DCT work
      
      Merge and test with Sumans Segmenation coding optimizations
      
      Change-Id: Iee12e83661c7abbd1e0ce6810915eb4ec35e2d8e
      01ce04bc
  27. 16 Sep, 2011 1 commit
    • Yaowu Xu's avatar
      add 8x8 intra prediction modes · ca6b85aa
      Yaowu Xu authored
      Patch 1 to Patch 3 is an initial implementation of 8x8 intra prediction
      modes, here are with the following assumptions:
      a. 8x8 has 4 prediction modes DC, H, V and TM
      b. UV 4x4 block use the same mode as corresponding 8x8 area
      c. i8x8 modes are enabled for key frame only for now
      Patch 4:
      d. removed debug code from previous patches
      Patch 5:
      e. added stats code to collect entropy stats and further cleaned up
      Patch 6:
      f. changed mode stats code to collect finer stats of modes
      Patch 7:
      g. normalized i8x8 modes distribution to total at 256 (8bits).
      Patch 8:
      h. fixed a bug in decoder and removed debug printf output.
      Patch 9:
      i. more cleanups to address paul's comment
      Patch 10:
      j. messy rebase/merges to bring the commit up to date.
      
      Tests on HD clips encoded with all key frame showing consistent gain
      on all clips and all metrics:~0.5%(psnr) and 0.6%(ssim):
      http://www.corp.google.com/~yaowu/no_crawl/i8x8hd_allkey_fixedq.html
      
      To build and test, configure with:
      --enable-experimental --enable-i8x8
      
      Change-Id: I9813fe07ae48cab5fdb5d904bca022514ad01e7f
      ca6b85aa
  28. 21 Jul, 2011 1 commit
    • Yaowu Xu's avatar
      fix more merge issues · 8c31484e
      Yaowu Xu authored
      With this fix, the experimental branch now builds and encodes correctly
      with the following two configure options respectively:
      --enable-experimental --enable-t8x8
      --enable-experimental
      
      Change-Id: I3147c33c503fe713a85fd371e4f1a974805778bf
      8c31484e
  29. 20 Jul, 2011 1 commit
  30. 15 Jul, 2011 1 commit
    • Tero Rintaluoma's avatar
      Tokenize MB optimized · 4e82f015
      Tero Rintaluoma authored
      Optimized C-code of the following functions:
       - vp8_tokenize_mb
       - tokenize1st_order_b
       - tokenize2nd_order_b
      Gives ~1-5% speed-up for RT encoding on Cortex-A8/A9
      depending on encoding parameters.
      
      Change-Id: I6be86104a589a06dcbc9ed3318e8bf264ef4176c
      4e82f015
  31. 28 Jun, 2011 1 commit
    • John Koleszar's avatar
      Use MAX_ENTROPY_TOKENS and ENTROPY_NODES more consistently · b32da7c3
      John Koleszar authored
      There were many instances in the code of vp8_coef_tokens and
      vp8_coef_tokens-1, which was a preprocessor macro despite the naming
      convention. Replace these with MAX_ENTROPY_TOKENS and ENTROPY_NODES,
      respectively.
      
      Change-Id: I72c4f6c7634c94e1fa066cd511471e5592c748da
      b32da7c3
  32. 08 Jun, 2011 1 commit
  33. 07 Jun, 2011 1 commit
  34. 21 Apr, 2011 1 commit
    • Scott LaVarnway's avatar
      Removed dc_diff from MB_MODE_INFO · 3698c1f6
      Scott LaVarnway authored
      The dc_diff flag is used to skip loopfiltering.  Instead
      of setting this flag in the decoder/encoder, we now check
      for this condition in the loopfilter.
      
      Change-Id: Ie2b9cdf9e0f4e8b932bbd36e0878c05bffd28931
      3698c1f6
  35. 20 Apr, 2011 1 commit
  36. 18 Mar, 2011 1 commit
    • John Koleszar's avatar
      Increase static linkage, remove unused functions · 429dc676
      John Koleszar authored
      A large number of functions were defined with external linkage, even
      though they were only used from within one file. This patch changes
      their linkage to static and removes the vp8_ prefix from their names,
      which should make it more obvious to the reader that the function is
      contained within the current translation unit. Functions that were
      not referenced were removed.
      
      These symbols were identified by:
      
        $ nm -A libvpx.a | sort -k3 | uniq -c -f2 | grep ' [A-Z] ' \
          | sort | grep '^ *1 '
      
      Change-Id: I59609f58ab65312012c047036ae1e0634f795779
      429dc676
  37. 14 Dec, 2010 1 commit
    • Johann's avatar
      shrink TOKENEXTRA and vp8_extra_bit_struct · 825adc46
      Johann authored
      Per John's previous change, shrink TOKENEXTRA from 20 to 8 bytes
      original: b7b1e6fb
      reverted: 41f4458a
      
      Also drop unused field from vp8_extra_bit_struct
      
      Update ARM ASM to deal with this change. In particular, Extra is signed
      and needs to be sign-extended when loaded.
      
      Change-Id: Ibd0ddc058432bc7bb09222d6ce4ef77e93a30b41
      825adc46
  38. 13 Dec, 2010 1 commit