1. 27 Mar, 2017 1 commit
    • Thomas Davies's avatar
      Add NEW_MULTISYMBOL experiment. · e60ce831
      Thomas Davies authored
      This experiment is for converting binary symbols in the baseline
      into non-binary symbols. EC_MULTISYMBOL should continue to be used
      by experiments with their own signalling for compatibility.
      Change-Id: Idc11a469b1806948107c0d6966235f3053c43519
  2. 24 Mar, 2017 1 commit
    • Jean-Marc Valin's avatar
      Enable cdef by default · 7677d431
      Jean-Marc Valin authored
      high-latency, cpu-used=0:
         PSNR | PSNR Cb | PSNR Cr | PSNR HVS |    SSIM | MS SSIM | CIEDE 2000
      -2.0680 | -0.9789 | -0.7987 |  -0.7414 | -1.6257 | -0.8961 |    -2.0220
      Low-latency, cpu-used=0:
         PSNR | PSNR Cb | PSNR Cr | PSNR HVS |    SSIM | MS SSIM | CIEDE 2000
      -3.9175 | -2.1697 | -2.5191 |  -2.4382 | -3.4157 | -2.5755 |    -3.6688
      Low-latency, cpu-used=4:
         PSNR | PSNR Cb | PSNR Cr | PSNR HVS |    SSIM | MS SSIM | CIEDE 2000
      -7.5800 | -4.3697 | -4.3494 |  -5.4149 | -7.8724 | -6.0894 |    -7.3975
      Change-Id: Ib784ed088fa537cf47d87477954c2d5047b3c42c
  3. 23 Mar, 2017 1 commit
  4. 20 Mar, 2017 1 commit
    • Debargha Mukherjee's avatar
      Add config flags and macros to control ext-inter · 37f6fe61
      Debargha Mukherjee authored
      Adds a dependent config flag 'interintra' to turn on/off interintra
      modes altogether.
      Adds a dependent config flag 'wedge' to turn on/off wedge compound
      for both interinter and interintra.
      Adds another macro to change wedge predictors to use
      only 0, 1/2, or 1 weights.
      From now, use
      --enable-ext-inter --enable-wedge --enable-interintra to get the
      same behavior as the old --enable-ext-inter.
      Change-Id: I2e787e6994163b6b859a9d6431b87c4217834ddc
  5. 15 Mar, 2017 2 commits
    • Sarah Parker's avatar
      Enable rect-tx by default · 81915f5d
      Sarah Parker authored
      Change-Id: I51f31083988d7d5c574067c1a3aa98b7949adcee
    • Fergus Simpson's avatar
      frame_superres: Add experimental flag · 6ee201db
      Fergus Simpson authored
      Frame Super-Resolution is an experiment currently under development.
      This commit just adds an experimental flag for it.
      The goal of the experiment is to compress a downsampled version of a
      frame instead of the full resolution one when bandwidth is limited. The
      decoder will need to upsample and filter the frame it recieves after
      decoding. It is thought that this will result in a visually superior
      result in low bandwidth scenarios.
      Change-Id: Ia8af8692cffd133db3838693fd85ded2442b078c
  6. 11 Mar, 2017 3 commits
  7. 10 Mar, 2017 3 commits
  8. 09 Mar, 2017 6 commits
    • Nathan E. Egge's avatar
      Add frame inspection data to the analyzer. · 2693ca52
      Nathan E. Egge authored
      Change-Id: I753b51a1ae9759086198c7433410717296f61c20
    • Tom Finegan's avatar
      Remove the av1_postproc flag. · 0a4bc8d3
      Tom Finegan authored
      It was touched only in configure, and then only for dist dir naming.
      No source level changes.
      Change-Id: I5b6134ad800c74d0f022441553da99ab97311b79
    • Nathan E. Egge's avatar
      Add analyzer to build system. · 1a0d5ea0
      Nathan E. Egge authored
      Change-Id: I93da53eae42d91419cc5bb4d55e7ce87eadd2551
    • Alex Converse's avatar
      Auto-detect wxwigets · d5f51b33
      Alex Converse authored
      Change-Id: I9f9140ed187cd82517481df95c5c98eebffa51a0
    • Nathan E. Egge's avatar
      Port Daala stream analyzer to AV1. · f4fa01e9
      Nathan E. Egge authored
      This ports the wx-widgets stream analyzer from Daala to AV1.
      Currently, this supports playback, zooming, and printing bit accounting
       statistics to stdout.
      The configure script does not yet build the analyzer, to compile it:
       g++ -I. examples/analyzer.cc video_reader.c ivfdec.c tools_common.c \
       libaom.a `wx-config --cppflags` `wx-config --libs` -o analyzer
      Change-Id: I0e4288d52a103850b255f226f398892cc50d29e8
    • Yaowu Xu's avatar
      Revert "Enable ALT_INTRA experiment by default." · 2729178b
      Yaowu Xu authored and James Zern's avatar James Zern committed
      This reverts commit 8e55c2eb.
      This change causes unit tests to fail (test_intra_pred_speed)
      / crash (x86-linux-gcc) with no experiments enabled.
      Change-Id: I5c8c51a9fe33287c2a4d8b9985ca97388b8790c8
  9. 08 Mar, 2017 2 commits
    • Tom Finegan's avatar
      Remove temporal denoising flags. · f80a5e22
      Tom Finegan authored
      - Remove {av1_,}temporal_denoising feature from configure.
      - Remove CONFIG_{AV1_,}TEMPORAL_DENOISING from cmake build.
      Change-Id: I5ed823c0fcc9a2e1be8ce495fe55c321da206c51
    • Urvang Joshi's avatar
      Enable ALT_INTRA experiment by default. · 8e55c2eb
      Urvang Joshi authored
      This tool was adopted in the AOM codec WG call on 03/03/2017.
      Change-Id: I253e9cf0bd7471940f6bf5ef7f9cceb9ee72c708
  10. 07 Mar, 2017 4 commits
  11. 03 Mar, 2017 2 commits
  12. 27 Feb, 2017 1 commit
  13. 25 Feb, 2017 2 commits
  14. 24 Feb, 2017 4 commits
    • Angie Chiang's avatar
      Add lv_map experimental flag · c21acce2
      Angie Chiang authored
      This is for level-map coefficient coding experiment
      Change-Id: Id16c64da3749c91558824f98bdfe4c4982cd03cc
    • Fangwen Fu's avatar
      improving palette throughput · 33bcd117
      Fangwen Fu authored
      * code the palette color index using 45 wavefront
      * interleave the coeff and palette color index in
        transform block level
      * the above change does not change code efficiency
      The 45 wavefront scan allows to compute the ctx of
      the diagonal samples' indices  at the same time. 
      Interleaving palette indices and palette residual
      on a transform block basis means that the entropy
       decoding and further processing of the palette 
      residual is not delayed by the entropy decoding 
      of all the color indices of the palette encoded 
      Change-Id: Ie9f576002a9a68394b99c23b01e9730df06df070
    • Sebastien Alaiwan's avatar
      Allow disabling the 8-bit (low-bitdepth) operating path. · 98378137
      Sebastien Alaiwan authored
      This allows compiling a codec using the same operating path (the generic
      "high-bitdepth" one), regardless of the profile of the input bitstream.
      For now, keep the 16-bit (generic) pixel operating path disabled by default.
      Change-Id: Idd31a842b801a82c4918b1cfa7cc0bff5b11d060
    • Alex Converse's avatar
      ec_multiysmbol: Enable by default · 343c1399
      Alex Converse authored
      daala_ec now works without ec multisymbol, ec_multisymbol was accepted
      at the face to face meeting. Enable ec_multisymbol on its own and not as
      a carryover with daala_ec.
      Change-Id: I2f9d2523decd0641be6bc476c78cfd60f2e83a02
  15. 23 Feb, 2017 2 commits
  16. 22 Feb, 2017 1 commit
  17. 18 Feb, 2017 1 commit
  18. 17 Feb, 2017 1 commit
    • Rostislav Pehlivanov's avatar
      Implement a new rate control system · 002e7b7a
      Rostislav Pehlivanov authored
      This commit implements a new rate control system which was ported from
      Daala's rate control system (which was based off of Theora's rate
      control system) to the encoder. Its aim is to address the weaknesses of
      the current rate control system and eventually serve as its replacement.
      This is still work in progress. So far this commit only implements
      support for single pass encoding for constant quality and bitrate
      Additional commits which implement two-pass support and the rest to
      match the feature set of the current rate control system are coming
      The rate control system hasn't been fully tuned (and will likely need
      additional tuning as the encoder's development progresses) and does
      contain some "hacks", to convert the quality to a quantizer value
      (empirical) and to tweak the quantizer in between golden frames (which
      uses some code from the current rate control system as well as code
      which attempts to model what that code does), the latter of which is
      only in the constant quality codepath.
      Bitrate targeting works much better than the current rate control
      system's targeting and will actually closely match the rate specified by
      the user without the current rate control system's bursty behaviour.
      Change-Id: I588fbfd2e80a3d21ce7176903115d6a96ef1700a
  19. 16 Feb, 2017 1 commit
  20. 15 Feb, 2017 1 commit
    • Nathan E. Egge's avatar
      Add flag for RAWBITS to use raw bits with DAALA_EC. · 24f1a904
      Nathan E. Egge authored
      The use of raw bits is now disabled by default and can be turned on with:
       ./configure --enable-experimental --enable-rawbits
      This commit has a negligible impact on rate.
      master@2017-02-14T18:57:22.282Z -> no_rawbits@2017-02-14T18:57:41.977Z
         PSNR | PSNR Cb | PSNR Cr | PSNR HVS |    SSIM | MS SSIM | CIEDE 2000
      -0.0000 | -0.0000 | -0.0000 |  -0.0000 | -0.0000 | -0.0000 |    -0.0000
      master@2017-02-14T18:52:48.425Z -> no_rawbits@2017-02-14T18:52:04.489Z
         PSNR | PSNR Cb | PSNR Cr | PSNR HVS |    SSIM | MS SSIM | CIEDE 2000
      -0.0001 | -0.0001 | -0.0001 |  -0.0001 | -0.0001 | -0.0001 |    -0.0001
      Change-Id: I01e79e9f314565a64b224ca41047f7bd7fe33f70