1. 31 Jan, 2013 1 commit
  2. 10 Dec, 2012 1 commit
  3. 27 Nov, 2012 1 commit
    • Marco Paniconi's avatar
      Updates to qp-regulate and rate correction factor. · 464b1df6
      Marco Paniconi authored
      Don't use the switch to gf_rate_correction factor when
      temporal layers is used (i.e., cpi->oxcf.number_of_layers > 1).
      
      In temporal layers, we prefer to avoid this as any frame
      (e.g., base layer frame at anchor of pattern) may update
      both last and golden (and possibly alt-ref), and so we would get
      different rate correction factors within the same layer.
      
      This change will make sure one rate correction factor exists for each layer.
      
      Also, made some other code in qp-regulate that depends on
      alt/golden update specific to the 1 layer case.
      
      Change-Id: I41a6d085bd477f9307ef3b3c311695214273892c
      464b1df6
  4. 05 Nov, 2012 1 commit
  5. 01 Nov, 2012 2 commits
  6. 31 Oct, 2012 5 commits
  7. 30 Oct, 2012 2 commits
  8. 23 Oct, 2012 1 commit
    • Deb Mukherjee's avatar
      Merging in the Switchable interp experiment · 53731197
      Deb Mukherjee authored
      There is a macro DEFAULT_INTERP_FILTER defined in encoder/onyx_if.c that
      is set as EIGHTTAP for now - so SWITCHABLE is not really used. Ideally,
      this should be SWITCHABLE but that would make the encoder quite a bit slower.
      We will change the default filter to SWITCHABLE once we find a faster way to
      search for switchable filters.
      
      Change-Id: Iee91832cdc07e6e14108d9b543130fdd12fc9874
      53731197
  9. 22 Oct, 2012 2 commits
  10. 17 Oct, 2012 1 commit
  11. 12 Oct, 2012 1 commit
  12. 11 Oct, 2012 1 commit
  13. 09 Oct, 2012 1 commit
    • Ronald S. Bultje's avatar
      Selectable transform size try 2. · 9ca3c8b2
      Ronald S. Bultje authored
      Results: derf (vanilla or +hybridtx) +0.2% and (+hybrid16x16
      or +tx16x16) +0.7%-0.8%; HD (vanilla or +hybridtx) +0.1-0.2%
      and (+hybrid16x16 or +tx16x16) +1.4%, STD/HD (vanilla or +hybridtx)
      about even, and (+hybrid16x16 or +tx16x16) +0.8-1.0%.
      
      Change-Id: I03899e2f7a64e725a863f32e55366035ba77aa62
      9ca3c8b2
  14. 27 Sep, 2012 1 commit
    • Deb Mukherjee's avatar
      Entropy coding for hybrid transform · 3f5d60b3
      Deb Mukherjee authored
      Separates the entropy coding context models for 4x4, 8x8 and 16x16
      ADST variants.
      
      There is a small improvement for HD (hd/std-hd) by about 0.1-0.2%.
      Results on derf/yt are about the same, probably because there is not
      enough statistics.
      
      Results may improve somewhat once the initial probability tables are
      updated for the hybrid transforms which is coming soon.
      
      Change-Id: Ic7c0c62dacc68ef551054fdb575be8b8507d32a8
      3f5d60b3
  15. 14 Sep, 2012 1 commit
  16. 13 Sep, 2012 1 commit
  17. 06 Sep, 2012 1 commit
    • Deb Mukherjee's avatar
      New motion vector entropy coding · 00f9eb65
      Deb Mukherjee authored
      Adds a new experiment with redesigned/refactored motion vector entropy
      coding. The patch also takes a first step towards separating the
      integer and fractional pel components of a MV. However the fractional
      pel encoding still depends on the integer pel part and so they are
      not fully independent. Further experiments are in progress to see
      how much they can be decoupled without affecting performance.
      All components including entropy coding/decoding, costing for MV
      search, forward updates and backward updates to probability tables,
      have been implemented.
      
      Results so far:
      derf: +0.19%
      std-hd: +0.28%
      yt: +0.80%
      hd: +1.15%
      
      Patch: Simplifies the fractional pel models:
      derf: +0.284%
      std-hd: +0.289%
      yt: +0.849%
      hd: +1.254%
      
      Patch: Some changes in the models, rebased.
      derf: +0.330%
      std-hd: +0.306%
      yt: +0.816%
      hd: +1.225%
      
      Change-Id: I646b3c48f3587f4cc909639b78c3798da6402678
      00f9eb65
  18. 30 Aug, 2012 1 commit
    • Jingning Han's avatar
      hybrid transform of 16x16 dimension · de6dfa6b
      Jingning Han authored
      Enable ADST/DCT of dimension 16x16 for I16X16 modes. This change provides
      benefits mostly for hd sequences.
      
      Set up the framework for selectable transform dimension.
      
      Also allowing quantization parameter threshold to control the use
      of hybrid transform (This is currently disabled by setting threshold
      always above the quantization parameter. Adaptive thresholding can
      be built upon this, which will further improve the coding performance.)
      
      The coding performance gains (with respect to the codec that has all
      other configuration settings turned on) are
      
      derf:   0.013
      yt:     0.086
      hd:     0.198
      std-hd: 0.501
      
      Change-Id: Ibb4263a61fc74e0b3c345f54d73e8c73552bf926
      de6dfa6b
  19. 20 Aug, 2012 1 commit
  20. 03 Aug, 2012 2 commits
    • Deb Mukherjee's avatar
      Merging in high_precision_mv experiment · 2af5473a
      Deb Mukherjee authored
      Merged in the high_precision_mv experiment to make it easier
      to work on new mv encoding strategies. Also removed
      coef_update_probs3().
      
      Change-Id: I82d3b0bb642419fe05dba82528bc9ba010e90924
      2af5473a
    • Daniel Kang's avatar
      16x16 DCT blocks. · fed8a183
      Daniel Kang authored
      Set on all 16x16 intra/inter modes
      
      Features:
      - Butterfly fDCT/iDCT
      - Loop filter does not filter internal edges with 16x16
      - Optimize coefficient function
      - Update coefficient probability function
      - RD
      - Entropy stats
      - 16x16 is a config option
      
      Have not tested with experiments.
      
      hd:     2.60%
      std-hd: 2.43%
      yt:     1.32%
      derf:   0.60%
      
      Change-Id: I96fb090517c30c5da84bad4fae602c3ec0c58b1c
      fed8a183
  21. 30 Jul, 2012 1 commit
    • Deb Mukherjee's avatar
      Adds support for switchable interpolation filters. · 52597441
      Deb Mukherjee authored
      Allows for swtiching/setting interpolation filters at the MB
      level. A frame level flag indicates whether to use a specifc
      filter for the entire frame or to signal the interpolation
      filter for each MB. When switchable filters are used, the
      encoder chooses between 8-tap and 8-tap sharp filters. The
      code currently has options to explore other variations as well,
      which will be cleaned up subsequently.
      
      One issue with the framework is that encoding is slow. I
      tried to do some tricks to speed things up but it is still slow.
      Decoding speed should not be affected since the number of
      filter taps remain unchanged.
      
      With the current version, we are up 0.5% on derf on average but
      some videos city/mobile improve by close to 4 and 2% respectively.
      If we did a full-search by turning the SEARCH_BEST_FILTER flag
      on, the results are somewhat better.
      
      The framework can be combined with filtered prediction, and I
      seek feedback regarding that.
      
      Rebased.
      
      Change-Id: I8f632cb2c111e76284140a2bd480945d6d42b77a
      52597441
  22. 28 Jul, 2012 1 commit
    • Marco Paniconi's avatar
      Remove the resetting of qp params for temporal layers. · ef4a9670
      Marco Paniconi authored
      The ambient qp and active worse/best qp were reset for every frame
      when temporal layers is on. This change removes this reset.
      
      As this affects the target size for forced key frames
      (it will actually lower the size somewhat), we increased the
      inital boost factor to compensate.
      
      Change-Id: Ie38d95f5c99ab3d447469c49e2177bc3fcc4ad28
      ef4a9670
  23. 17 Jul, 2012 1 commit
  24. 29 Jun, 2012 1 commit
    • Hui Su's avatar
      Add lossless compression mode. · e44ee38a
      Hui Su authored
      This commit adds lossless compression capability to the experimental
      branch. The lossless experiment can be enabled using --enable-lossless
      in configure. When the experiment is enabled, the encoder will use
      lossless compression mode by command line option --lossless, and the
      decoder automatically recognizes a losslessly encoded clip and decodes
      accordingly.
      
      To achieve the lossless coding, this commit has changed the following:
          1. To encode at lossless mode, encoder forces the use of unit
      quantizer, i.e, Q 0, where effective quantization is 1. Encoder also
      disables the usage of 8x8 transform and allows only 4x4 transform;
          2. At Q 0, the first order 4x4  DCT/IDCT have been switched over
      to a pair of forward and inverse Walsh-Hadamard Transform
      (http://goo.gl/EIsfy),  with proper scaling applied to match the range
      of the original 4x4 DCT/IDCT pair;
          3. At Q 0, the second order remains to use the previous
      walsh-hadamard transform pair. However, to maintain the reversibility
      in second order transform at Q 0, scaling down is applied to first
      order DC coefficients prior to forward transform, and scaling up is
      applied to the second order output prior to quantization. Symmetric
      upscaling and downscaling are added around inverse second order
      transform;
          4. At lossless mode, encoder also disables a number of minor
      features to ensure no loss is introduced, these features includes:
              a. Trellis quantization optimization
              b. Loop filtering
              c. Aggressive zero-binning, rounding and zero-bin boosting
              d. Mode based zero-bin boosting
      
      Lossless coding test was performed on all clips within the derf set,
      to verify that the commit has achieved lossless compression for all
      clips. The average compression ratio is around 2.57 to 1.
      (http://goo.gl/dEShs)
      
      Change-Id: Ia3aba7dd09df40dd590f93b9aba134defbc64e34
      e44ee38a
  25. 27 Jun, 2012 1 commit
    • Adrian Grange's avatar
      Added Prediction Filter to Mode Selection · bbc926dc
      Adrian Grange authored
      Added the ability to optionally filter the prediction data
      when inter modes are selected (excludes SPLITMV, for now).
      
      The mode selection loop considers both the filtered and
      non-filtered prediction data when choosing mode. The filter
      can be turned on/off at the frame-level, or signaled for
      each MB.
      
      Change-Id: I1b783c71d95a361ab36c761b07e8a6b06bc36822
      bbc926dc
  26. 26 Jun, 2012 1 commit
    • Deb Mukherjee's avatar
      Continued adaptive entropy coding · f3dff402
      Deb Mukherjee authored
      Incorporates mv_ref, mbsplit and second_mv into the adaptive
      entropy framework. The mv_ref framework has been modified from
      before.
      
      Adds some clean-ups and fixes.
      
      Results with the adaptive entropy experiment are currently up by
      +1.93% on derf; +2.33% std-hd and +1.87% yt-hd.
      
      Fixed a nasty intermittent bug.
      
      Change-Id: I4b1ac9f9483b48432597595195bfec05f31d1e39
      f3dff402
  27. 19 Jun, 2012 1 commit
  28. 15 Jun, 2012 1 commit
    • Deb Mukherjee's avatar
      Adaptive entropy coding of coefficients, modes, mv. · 1fe85a35
      Deb Mukherjee authored
      This patch incorporates adaptive entropy coding of coefficient tokens,
      and mode/mv information based on distributions encountered in a frame.
      Specifically, there is an initial forward update to the probabilities
      in the bitstream as before for coding the symbols in the frame, however
      at the end of decoding each frame, the forward update to the
      probabilities is reverted and instead the probabilities are updated
      towards the actual distributions encountered within the frame.
      The amount of update is weighted by the number of hits within each
      context.
      
      Results on derf/hd/std-hd are all up by 1.6%.
      
      On derf, the most of the gains come from coefficients, however for the
      hd and std-hd sets, the most of the gains come from the mode/mv
      information updates.
      
      Change-Id: I708c0e11fdacafee04940fe7ae159ba6844005fd
      1fe85a35
  29. 12 Jun, 2012 1 commit
  30. 11 Jun, 2012 1 commit
    • John Koleszar's avatar
      Fix pedantic compiler warnings · 0164a1cc
      John Koleszar authored
      Allows building the library with the gcc -pedantic option, for improved
      portabilty. In particular, this commit removes usage of C99/C++ style
      single-line comments and dynamic struct initializers. This is a
      continuation of the work done in commit 97b766a4, which removed most
      of these warnings for decode only builds.
      
      Change-Id: Id453d9c1d9f44cc0381b10c3869fabb0184d5966
      0164a1cc
  31. 07 Jun, 2012 1 commit
  32. 15 May, 2012 1 commit