The file uses functions defined in vp8_rtcd.h but did not include the
header.

Change-Id: I110196ddc9181e533be1fe656e21c1791cabe226

Change-Id: I9702f3e9ed664c2537e7874698c944620b07fff8

Change-Id: Ic9956ddf1c2ddffcf7be7fdfc23ad9a2426fc47a
WIP: Fixing unsafe threading in VP8 encoder.

WIP: Fixing unsafe threading in VP8 encoder.
Use the passed in macroblock instead of the macroblock located in
cpi.

Change-Id: I1bfa07de6ea463f2baeaae1bae5d950691bc4afc

Fixing unsafe threading in VP8 encoder.

Change-Id: Ibf4c89a2043654834747811bc11eb283de0bb830

Multi-threaded code was not updated to disable background
refresh for non base-layer frames at the time it was
disabled in the main C-code.

Change-Id: Id6cc376130b7def046942121cfd0526b4f0a71d4

Should be MACROBLOCK, not MACROBLOCKD

Change-Id: I0353bbdf085a181ae2ac1f0b96849b38566e9f6a

Change-Id: I44e4e3869f231ae270cca98c9565f23c512e3ddf

Change-Id: I650a593162280ab40e71e527ec6518303e2d5723

Change-Id: I28ac1519d1594801fef9a623cb64598d3d751eb0

Change-Id: Ie22841d096f3c86694b95bd06fc3a8ce1f032a10

Change-Id: Ib73c7b2bee4cb2eb2528fa6b381fffe9503079a0

Change-Id: Ie9a26be7c9baa54a0e43a63ed6c77f2746477a9c

Change-Id: I289564a5a27f0d03ddc6f19c7838542ff22719be

Code cleanup

Change-Id: I82f9d787a2f511d39895fd8dfd5347a1676d9dbc

Change-Id: Ic084c475844b24092a433ab88138cf58af3abbe4

Most of these were picked up by jenkins in the commit that changed
the vp8 namespace to vp9 in common/.

Change-Id: I5cbd56ffc753b92ef805133cda6acc1713a13878

For non-static functions, change the prefix to vp9_. For static functions,
remove the prefix. Also fix some comments, remove unused code or unused
function prototypes.

Change-Id: I1f8be05362f66060fe421c3d4c9a906fdf835de5

This change encompasses VP8_PTR, VP8_COMP, VP8D_COMP, VP8_COMMON,
VP8Decompressor and VP8Common.

Change-Id: I514ef4ad4e682370f36d656af1c09ee20da216ad

Change-Id: Ic5a5f60e1ff9d9ccae4174160d36529466eeb509

Most of these were picked up in the previous commit (prefix change from
vp8_ to vp9_), but I'm pushing this separately so that it's easier to
review.

Change-Id: I91e959895778b8632d7d33375523df8a7568a490

Change-Id: Ie2e3652591b010ded10c216501ce24fd95d0aec5

Change-Id: Ie8ba934a757acec1c80ac37ab9307c9a2783254e

Change-Id: I77bc38b53428ff3e6456b5bc3516418892a58c1e

Also merge some duplicate code related to the superblock experiment
in the RD loop.

Change-Id: Ic93f1d4d1ed81220fd7ecf6e65da2821a215b2de

Preparation for project restructuring.
Added vp9_ prefix on some function names that have global scope.
Added static declaration on some that dont.

Change-Id: If072f78b4300e8c17cfeed82c5d17b59946dcc5e

Change-Id: I0c689fb44e9e91539c450d26672d7a1d92e92900

Coding and costing of mv reference signal.

Issues in updating MV ref with COMPANDED_MVREF_THRESH
to be resolved. Ideally the MV precision should be defined based
on absolute MV magnitude not as now the MV ref magnitude.

Update to mv counts moved into bitstream.c because otherwise
if the motion reference is changed at the last minute the encoder
and decoder get out of step in terms of the counts used to update
entropy probs.

Code working on a few test clips but no results yet re benefit vs
signaling cost and no tuning of red loop to test lower cost alternatives
based on the available reference values.

Patch 3. Added check to make sure we don't pick a reference
that would give rise to an uncodeable / out of range residual.

Patch 6-7: Attempt to rebase. OK to submit but best to leave flag off for now.

Patch 9. Remove print no longer needed.

Change-Id: I1938c2ffe41afe6d3cf6ccc0cb2c5d404809a712

Should fix B_PRED-related encoder/decoder mismatches.

Change-Id: I16f808dffd19094e02e8562ba58cc1016155ce93

Change-Id: I87d571008c73f0a8514e0a864405aadb82fd1bc0

There is a macro DEFAULT_INTERP_FILTER defined in encoder/onyx_if.c that
is set as EIGHTTAP for now - so SWITCHABLE is not really used. Ideally,
this should be SWITCHABLE but that would make the encoder quite a bit slower.
We will change the default filter to SWITCHABLE once we find a faster way to
search for switchable filters.

Change-Id: Iee91832cdc07e6e14108d9b543130fdd12fc9874

Change-Id: I0d306b0062be59bc785b65882691c956c8b5e7c8

Removes the old mv encoding code.

Change-Id: I1026d48cc5ac15ccb776f98463e929254c3dc7da

Change-Id: I99f1982b30a630a9a070a8326d83b34a33cba14c

For splitmv, where partitioning is 8x16, 16x8 or 8x8, this patch
uses the 8x8 transform (instead of the 4x4) if txfm_mode is
ALLOW_8X8 or ALLOW_16X16. For TX_MODE_SELECT, splitmv can indicate
which of the 2 transform sizes (4x4 or 8x8) it wants to use.

Gains (with hybridtx4x4/8x8/16x16 and tx_select experiments
enabled) on derf: +0.9%, HD: +0.4%, STD/HD: +0.8% (SSIM or overall
PSNR, both metrics show similar improvements).

Change-Id: Ide954b000b415548ed92a7ac78e24f36e60fcf06

Change-Id: Idd2722a538423b451e1e3495f89a7141480493d6

Allows B_VL_PRED & B_LD_PRED modes to be used for all blocks
within a MB in B_PRED mode. These modes were temporarily
disabled with super-block coding.

Change-Id: I973b9bdb82c3da5f12d7cc963162a28805f25303

Separates the logic on transform type selection previously spread out
over a number of files into a separate function. Currently the tx_type
field in b_mode_info is not used, but still left in there to eventually
use for signaling the transform type in the bitstream.

Also, now for tx_type = DCT_DCT, the regular integer DCT is used, as
opposed to the floating point DCT used in conjuction with hybrid
transform.

Results change somewhat due to the transform change, but are within
reasonable limits. The hd/std-hd sets are slightly up, while derf/yt
are slightly down.

Change-Id: I5776840c2239ca2da31ca6cfd7fd1148dc5f9e0f

Change-Id: If9fc2df4051ccfb8d804dae9d1be08d12d0f81ce

remove useless space after address-of operator.

Change-Id: I1fb9e82e8d6cf87558fbd454fb5c0f87599ca2ab