GitLab

Set on all 16x16 intra/inter modes

Features:
- Butterfly fDCT/iDCT
- Loop filter does not filter internal edges with 16x16
- Optimize coefficient function
- Update coefficient probability function
- RD
- Entropy stats
- 16x16 is a config option

Have not tested with experiments.

hd:     2.60%
std-hd: 2.43%
yt:     1.32%
derf:   0.60%

Change-Id: I96fb090517c30c5da84bad4fae602c3ec0c58b1c

This commit is to remove two arrays, which contain the probabilities
of how likely each probability in coef_probs table is updated. The
commit changed to use a fixed number "252".

Surprisedly, the overall impact on quality is close to zero, which
basically says the two big static arrays are not helpful at all.
derf: -0.016%, -0.020%
std-hd: 0.000%, -0.013%
yt: -0.022%, +0.007%
yt-hd: -0.038%, +0.034%

Change-Id: Ifee94d28a37dcab4f1d2b994bd5b07575be42b72

1. block types
There are only three types of blocks for 8x8 transformed MBs, i.e. Y
block with DC does not exist for 8x8 transformed MBs as all MB using
8x8 transform have 2nd order haar transform. This commit introduced
a new macro BLOCK_TYPES_8X8 to reflect such fact.

2. context counters
This commit also fixed the mixed of context_counters between 4x4 and
8x8 transformed MBs. The mixed use of the counters leads me to think
the existing the context probabilities were not properly generated
from 8x8 transformed MBs.

3. redundant collecting in recoding
The commit also corrected the code that accumulates entropy stats by
making sure stats only collected for final packing, not during the
recode loop

Change-Id: I029f09f8f60bd0c3240cc392ff5c6d05435e322c

This patch expands the set of prev contexts used for video coding
from 3 to 4.

There is a small improvement of the order of 0.08% for derf and
0.15% on the HD set. The tests were rerun after the various merges
last week. There are two columns in each test - the first are the
results with the mbskip change, and the second with expanded contexts
added on top of that.

Derf:
http://www.corp.google.com/~debargha/vp8_results/explibvpx_newentropy_expcontext.html

HD:
http://www.corp.google.com/~debargha/vp8_results/explibvpx_hd_newentropy_expcontext.html

Rebased.

Broke up 80 char lines.

Change-Id: I82d2e72d054e530cbf5ce9aa0e6d85c582965675

This is a code snapshot of experimental work currently ongoing for a
next-generation codec.

The codebase has been cut down considerably from the libvpx baseline.
For example, we are currently only supporting VBR 2-pass rate control
and have removed most of the code relating to coding speed, threading,
error resilience, partitions and various other features.  This is in
part to make the codebase easier to work on and experiment with, but
also because we want to have an open discussion about how the bitstream
will be structured and partitioned and not have that conversation
constrained by past work.

Our basic working pattern has been to initially encapsulate experiments
using configure options linked to #IF CONFIG_XXX statements in the
code. Once experiments have matured and we are reasonably happy that
they give benefit and can be merged without breaking other experiments,
we remove the conditional compile statements and merge them in.

Current changes include:
* Temporal coding experiment for segments (though still only 4 max, it
  will likely be increased).
* Segment feature experiment - to allow various bits of information to
  be coded at the segment level. Features tested so far include mode
  and reference frame information, limiting end of block offset and
  transform size, alongside Q and loop filter parameters, but this set
  is very fluid.
* Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used
  in MBs using 16x16 prediction modes within inter frames.
* Compound prediction (combination of signals from existing predictors
  to create a new predictor).
* 8 tap interpolation filters and 1/8th pel motion vectors.
* Loop filter modifications.
* Various entropy modifications and changes to how entropy contexts and
  updates are handled.
* Extended quantizer range matched to transform precision improvements.

There are also ongoing further experiments that we hope to merge in the
near future: For example, coding of motion and other aspects of the
prediction signal to better support larger image formats, use of larger
block sizes (e.g. 32x32 and up) and lossless non-transform based coding
options (especially for key frames). It is our hope that we will be
able to make regular updates and we will warmly welcome community
contributions.

Please be warned that, at this stage, the codebase is currently slower
than VP8 stable branch as most new code has not been optimized, and
even the 'C' has been deliberately written to be simple and obvious,
not fast.

The following graphs have the initial test results, numbers in the
tables measure the compression improvement in terms of percentage. The
build has  the following optional experiments configured:
--enable-experimental --enable-enhanced_interp --enable-uvintra
--enable-high_precision_mv --enable-sixteenth_subpel_uv

CIF Size clips:
http://getwebm.org/tmp/cif/
HD size clips:
http://getwebm.org/tmp/hd/
(stable_20120309 represents encoding results of WebM master branch
build as of commit#7a159071)

They were encoded using the following encode parameters:
--good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63
--end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999
--kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50
--minsection-pct=0 --maxsection-pct=800 --sharpness=0
--arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF)
--arnr-type=3

Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c

Change-Id: I8e9b6b154e1a0d0cb42d596366380d69c00ac15f

With this fix, the experimental branch now builds and encodes correctly
with the following two configure options respectively:
--enable-experimental --enable-t8x8
--enable-experimental

Change-Id: I3147c33c503fe713a85fd371e4f1a974805778bf

Please refer to previous commit messages for detailed info:
https://on2-git.corp.google.com/g/#change,5940
https://on2-git.corp.google.com/g/#change,6045

Change-Id: I8b16992f2f69c5a808ad40a3e32ef589cce7c59d

There were many instances in the code of vp8_coef_tokens and
vp8_coef_tokens-1, which was a preprocessor macro despite the naming
convention. Replace these with MAX_ENTROPY_TOKENS and ENTROPY_NODES,
respectively.

Change-Id: I72c4f6c7634c94e1fa066cd511471e5592c748da

Changes 'The VP8 project' to 'The WebM project', for consistency
with other webmproject.org repositories.

Fixes issue #97.

Change-Id: I37c13ed5fbdb9d334ceef71c6350e9febed9bbba

When the license headers were updated, they accidentally contained
trailing whitespace, so unfortunately we have to touch all the files
again.

Change-Id: I236c05fade06589e417179c0444cb39b09e4200d

Change-Id: Ieebea089095d9073b3a94932791099f614ce120c