Initial revision

git-svn-id: http://svn.annodex.net/liboggz/trunk@343 8158c8cd-e7e1-0310-9fa4-c5954c97daef

AUTHORS

+Conrad Parker <conrad@metadecks.org>

COPYING

+   Copyright (C) 2003 CSIRO Australia
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+   
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+   
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+   
+   - Neither the name of the CSIRO nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+   
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+   PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE ORGANISATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+

ChangeLog

+Thu Oct 16 21:55:07 EST 2003 Conrad Parker <conrad@annodex.net>
+
+	* split liboggz out from libannodex sources, started ChangeLog

INSTALL

+Basic Installation
+==================
+
+   These are generic installation instructions.
+
+   The `configure' shell script attempts to guess correct values for
+various system-dependent variables used during compilation.  It uses
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions.  Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, a file
+`config.cache' that saves the results of its tests to speed up
+reconfiguring, and a file `config.log' containing compiler output
+(useful mainly for debugging `configure').
+
+   If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release.  If at some point `config.cache'
+contains results you don't want to keep, you may remove or edit it.
+
+   The file `configure.in' is used to create `configure' by a program
+called `autoconf'.  You only need `configure.in' if you want to change
+it or regenerate `configure' using a newer version of `autoconf'.
+
+The simplest way to compile this package is:
+
+  1. `cd' to the directory containing the package's source code and type
+     `./configure' to configure the package for your system.  If you're
+     using `csh' on an old version of System V, you might need to type
+     `sh ./configure' instead to prevent `csh' from trying to execute
+     `configure' itself.
+
+     Running `configure' takes awhile.  While running, it prints some
+     messages telling which features it is checking for.
+
+  2. Type `make' to compile the package.
+
+  3. Optionally, type `make check' to run any self-tests that come with
+     the package.
+
+  4. Type `make install' to install the programs and any data files and
+     documentation.
+
+  5. You can remove the program binaries and object files from the
+     source code directory by typing `make clean'.  To also remove the
+     files that `configure' created (so you can compile the package for
+     a different kind of computer), type `make distclean'.  There is
+     also a `make maintainer-clean' target, but that is intended mainly
+     for the package's developers.  If you use it, you may have to get
+     all sorts of other programs in order to regenerate files that came
+     with the distribution.
+
+Compilers and Options
+=====================
+
+   Some systems require unusual options for compilation or linking that
+the `configure' script does not know about.  You can give `configure'
+initial values for variables by setting them in the environment.  Using
+a Bourne-compatible shell, you can do that on the command line like
+this:
+     CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
+
+Or on systems that have the `env' program, you can do it like this:
+     env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
+
+Compiling For Multiple Architectures
+====================================
+
+   You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory.  To do this, you must use a version of `make' that
+supports the `VPATH' variable, such as GNU `make'.  `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script.  `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'.
+
+   If you have to use a `make' that does not supports the `VPATH'
+variable, you have to compile the package for one architecture at a time
+in the source code directory.  After you have installed the package for
+one architecture, use `make distclean' before reconfiguring for another
+architecture.
+
+Installation Names
+==================
+
+   By default, `make install' will install the package's files in
+`/usr/local/bin', `/usr/local/man', etc.  You can specify an
+installation prefix other than `/usr/local' by giving `configure' the
+option `--prefix=PATH'.
+
+   You can specify separate installation prefixes for
+architecture-specific files and architecture-independent files.  If you
+give `configure' the option `--exec-prefix=PATH', the package will use
+PATH as the prefix for installing programs and libraries.
+Documentation and other data files will still use the regular prefix.
+
+   In addition, if you use an unusual directory layout you can give
+options like `--bindir=PATH' to specify different values for particular
+kinds of files.  Run `configure --help' for a list of the directories
+you can set and what kinds of files go in them.
+
+   If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+Optional Features
+=================
+
+   Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System).  The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+   For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+
+Specifying the System Type
+==========================
+
+   There may be some features `configure' can not figure out
+automatically, but needs to determine by the type of host the package
+will run on.  Usually `configure' can figure that out, but if it prints
+a message saying it can not guess the host type, give it the
+`--host=TYPE' option.  TYPE can either be a short name for the system
+type, such as `sun4', or a canonical name with three fields:
+     CPU-COMPANY-SYSTEM
+
+See the file `config.sub' for the possible values of each field.  If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the host type.
+
+   If you are building compiler tools for cross-compiling, you can also
+use the `--target=TYPE' option to select the type of system they will
+produce code for and the `--build=TYPE' option to select the type of
+system on which you are compiling the package.
+
+Sharing Defaults
+================
+
+   If you want to set default values for `configure' scripts to share,
+you can create a site shell script called `config.site' that gives
+default values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
+`PREFIX/etc/config.site' if it exists.  Or, you can set the
+`CONFIG_SITE' environment variable to the location of the site script.
+A warning: not all `configure' scripts look for a site script.
+
+Operation Controls
+==================
+
+   `configure' recognizes the following options to control how it
+operates.
+
+`--cache-file=FILE'
+     Use and save the results of the tests in FILE instead of
+     `./config.cache'.  Set FILE to `/dev/null' to disable caching, for
+     debugging `configure'.
+
+`--help'
+     Print a summary of the options to `configure', and exit.
+
+`--quiet'
+`--silent'
+`-q'
+     Do not print messages saying which checks are being made.  To
+     suppress all normal output, redirect it to `/dev/null' (any error
+     messages will still be shown).
+
+`--srcdir=DIR'
+     Look for the package's source code in directory DIR.  Usually
+     `configure' can determine that directory automatically.
+
+`--version'
+     Print the version of Autoconf used to generate the `configure'
+     script, and exit.
+
+`configure' also accepts some other, not widely useful, options.

Makefile.am

+## Process this file with automake to produce Makefile.in
+
+SUBDIRS = doc include src
+
+EXTRA_DIST = oggz.pc.in
+
+pkgconfigdir = $(libdir)/pkgconfig
+pkgconfig_DATA = oggz.pc

NEWS

+

README

+
+

autogen.sh

+#!/bin/sh
+
+# find out the automake version number, in format 1.major.minor
+# (i don't think version 2 will be coming anytime soon :)  (stolen
+# from videolan's vlc bootstrap strip)
+automake_version="none"
+if automake-1.7 --version >/dev/null 2>&1; then
+  automake_version="-1.7"
+elif automake-1.6 --version >/dev/null 2>&1; then
+  automake_version="-1.6"
+elif automake-1.5 --version >/dev/null 2>&1; then
+  automake_version="-1.5"
+elif automake --version > /dev/null 2>&1; then
+  automake_version=""
+  case "`automake --version | sed -e '1s/[^0-9]*//' -e q`" in
+    0|0.*|1|1.[01234]|1.[01234][-.]*) automake_version="none" ;;
+    1.5*)                             automake_version="-1.5" ;;
+    1.6*)                             automake_version="-1.6" ;;
+    1.7*)                             automake_version="-1.7" ;;
+    1.8*)                             automake_version="-1.8" ;;
+    1.9*)                             automake_version="-1.9" ;;
+  esac
+fi
+
+if test "x${automake_version}" = "xnone"; then
+  set +x
+  echo "you need automake version 1.5 or later"
+  exit 1
+fi
+
+
+
+automake_version_major=`echo "$automake_version" | cut -d. -f2`
+automake_version_minor=`echo "$automake_version" | cut -d. -f3`
+
+# need at least automake >= 1.5
+if test "$automake_version_major" -lt "5"; then
+  echo "$0: this project requires automake >= 1.5.  Please upgrade your version of automake to at least 1.5"
+  exit 1
+fi
+
+# make autotools directory if it doesn't already exist
+[ -d "autotools" ] || mkdir "autotools"
+
+# need libltdl?
+if grep -q AC_LIBLTDL_CONVENIENCE configure.*; then
+  LIBTOOLIZE=${LIBTOOLIZE:-libtoolize}
+  "$LIBTOOLIZE" --ltdl --copy --force
+fi
+
+AUTORECONF=${AUTORECONF:-autoreconf}
+"$AUTORECONF" --install "$@"
+

configure.ac

+# Process this file with autoconf to produce a configure script.
+AC_INIT
+AC_CONFIG_SRCDIR([src/liboggz/oggz.c])
+
+AC_PREREQ(2.53)
+AC_CONFIG_AUX_DIR(autotools)
+AC_CANONICAL_TARGET
+
+AM_INIT_AUTOMAKE(liboggz, 0.5.43)
+AM_CONFIG_HEADER(config.h)
+
+SHARED_VERSION_INFO="0:5:0"
+SHLIB_VERSION_ARG=""
+
+# Checks for programs.
+AC_PROG_CC
+AC_PROG_INSTALL
+AC_PROG_MAKE_SET
+AC_PROG_LIBTOOL
+
+AC_C_CONST
+AC_C_BIGENDIAN
+
+
+# Check for doxygen
+AC_CHECK_PROG(HAVE_DOXYGEN, doxygen, true, false)
+AM_CONDITIONAL(HAVE_DOXYGEN,$HAVE_DOXYGEN)
+if test $HAVE_DOXYGEN = "false"; then
+             AC_MSG_WARN([*** doxygen not found, docs will not be built])
+fi
+
+# Check for docbook
+AC_CHECK_PROG(HAVE_DOCBOOK, docbook2man, true, false)
+AM_CONDITIONAL(HAVE_DOCBOOK,$HAVE_DOCBOOK)
+
+dnl Check for types
+
+dnl Checks for libraries.
+LIBS=""
+
+# check for getopt in standard library
+HAVE_GETOPT=no
+AC_CHECK_LIB(getopt, getopt, HAVE_GETOPT="yes")
+if test "x$HAVE_GETOPT" = xyes ; then
+  GETOPT_LIBS="-lgetopt"
+  AC_SUBST(GETOPT_LIBS)
+fi
+
+dnl Overall configuration success flag
+oggz_config_ok=yes
+
+dnl
+dnl  Configuration option for building of experimental code.
+dnl
+
+ac_enable_experimental=no
+AC_ARG_ENABLE(experimental,
+     [  --enable-experimental   enable building of experimental code ],
+     [ ac_enable_experimental=yes ])
+
+if test "x${ac_enable_experimental}" = xyes ; then
+    AC_DEFINE(OGGZ_CONFIG_EXPERIMENTAL, [], [Define to build experimental code])
+fi
+
+dnl
+dnl  Configuration option for building of reading support.
+dnl
+
+ac_enable_read=yes
+AC_ARG_ENABLE(read,
+     [  --disable-read          disable building of reading support ],
+     [ ac_enable_read=no ], [ ac_enable_read=yes] )
+
+if test "x${ac_enable_read}" = xyes ; then
+    AC_DEFINE(OGGZ_CONFIG_READ, [1], [Build reading support])
+else
+    AC_DEFINE(OGGZ_CONFIG_READ, [0], [Do not build reading support]) 
+fi
+AM_CONDITIONAL(OGGZ_CONFIG_READ, test "x${ac_enable_read}" = xyes)
+
+dnl
+dnl  Configuration option for building of writing support.
+dnl
+  
+ac_enable_write=yes
+AC_ARG_ENABLE(write,
+     [  --disable-write         disable building of writing support ],
+     [ ac_enable_write=no ], [ ac_enable_write=yes] )
+
+if test "x${ac_enable_write}" = xyes ; then
+    AC_DEFINE(OGGZ_CONFIG_WRITE, [1], [Build writing support])
+else
+    AC_DEFINE(OGGZ_CONFIG_WRITE, [0], [Do not build writing support])
+fi
+AM_CONDITIONAL(OGGZ_CONFIG_WRITE, test "x${ac_enable_write}" = xyes)
+
+dnl
+dnl  Check read/write option sanity
+dnl
+if test "x${ac_enable_read}" = xno && test "x${ac_enable_write}" = xno ; then
+  AC_MSG_ERROR([
+***
+*** You have attempted to explicitly disable both writing and reading.
+***
+])
+fi
+
+
+dnl
+dnl Detect Ogg
+dnl
+
+HAVE_OGG=no
+XIPH_PATH_OGG(HAVE_OGG="yes", HAVE_OGG="no")
+if test "x$HAVE_OGG" = xno ; then
+  oggz_config_ok="no"
+  AC_CHECK_LIB(ogg, ogg_stream_init, HAVE_OGG="maybe")
+fi
+AM_CONDITIONAL(HAVE_OGG, [test "x$HAVE_OGG" = "xyes"])
+
+# Checks for header files.
+
+# Checks for typedefs, structures, and compiler characteristics.
+
+dnl Use -Wall if we have gcc.
+dnl changequote(,)dnl
+if test "x$ac_cv_prog_gcc" = xyes ; then
+  CFLAGS="$CFLAGS -Wall -g"
+fi
+dnl changequote([,])dnl
+
+case "$target_os" in
+  darwin* | rhapsody*)
+    dnl Disable -Wall and -pedantic for Apple Darwin/Rhapsody.
+    dnl System headers on these systems are broken.
+    temp_CFLAGS=`echo $CFLAGS | sed "s/-Wall -pedantic//"`
+    CFLAGS=$temp_CFLAGS
+    ;;
+  linux* | solaris*)
+    SHLIB_VERSION_ARG="-Wl,--version-script=Version_script"
+    ;;
+  *)
+    ;;
+esac
+
+# Checks for library functions.
+
+dnl
+dnl  Configuration tests complete -- provide summary of results.
+dnl
+
+if test $oggz_config_ok = no ; then
+
+AC_MSG_RESULT([
+**************************************************************
+
+*** $PACKAGE $VERSION: Automatic configuration FAILED.
+
+*** The file config.log has full details.
+
+*** The following required libraries are missing or
+*** misconfigured on your system:
+])
+
+if test "x$HAVE_OGG" != xyes ; then
+    AC_MSG_RESULT(
+[*** libogg, available from  http://www.xiph.org/ogg/])
+fi
+if test "x$HAVE_OGG" = xmaybe ; then
+    AC_MSG_RESULT(
+[      Development files missing: The libogg library binary seems to be
+      installed, but building of a test program failed.
+])
+fi
+
+AC_MSG_RESULT(
+[*** If you install the required libraries from source, you
+*** need to inform the dynamic linker of their location. If
+*** you install them in a system-wide directory such as
+*** /usr/local (the default), you must ensure that
+*** /usr/local/lib is listed in /etc/ld.so.conf, then run
+*** ldconfig to update the dynamic linking system.
+*** Alternatively, you can set your LD_LIBRARY_PATH environment
+*** variable to include the library installation directory.
+])
+
+
+AC_MSG_RESULT(
+[**************************************************************
+])
+
+
+AC_MSG_ERROR([
+***
+*** After fixing the above problems, you must run ./configure again.
+***
+]) 
+
+else
+
+AC_SUBST(SHLIB_VERSION_ARG)
+AC_SUBST(SHARED_VERSION_INFO)
+
+AC_OUTPUT([
+Makefile
+doc/Makefile
+doc/Doxyfile
+include/Makefile
+include/oggz/Makefile
+src/Makefile
+src/liboggz/Version_script
+src/liboggz/Makefile
+src/tools/Makefile
+src/tests/Makefile
+src/examples/Makefile
+oggz.pc
+])
+
+AC_MSG_RESULT([
+------------------------------------------------------------------------
+  $PACKAGE $VERSION:  Automatic configuration OK.
+
+  General configuration:
+
+    Experimental code: ........... ${ac_enable_experimental}
+    Reading support: ............. ${ac_enable_read}
+    Writing support: ............. ${ac_enable_write}
+
+  Installation paths:
+
+    liboggz: ..................... ${prefix}/lib
+    C header files: .............. ${prefix}/include/oggz
+    Documentation: ............... ${prefix}/share/doc/$PACKAGE
+
+  Example programs will be built but not installed.
+------------------------------------------------------------------------
+])
+
+
+fi

doc/Makefile.am

+docdir=$(prefix)/share/doc/@PACKAGE@
+
+EXTRA_DIST = Doxyfile.in liboggz
+
+all: doxygen-build.stamp
+
+if HAVE_DOXYGEN
+doxygen-build.stamp: Doxyfile $(top_srcdir)/include/oggz/*.h
+	doxygen
+	touch doxygen-build.stamp
+else
+doxygen-build.stamp:
+	echo "*** Warning: Doxygen not found; documentation will not be built."
+	touch doxygen-build.stamp
+endif
+
+install-data-local: doxygen-build.stamp
+	$(mkinstalldirs) $(docdir)
+	if test -d liboggz; then \
+	  for dir in liboggz/*; do \
+	    if test -d $$dir; then \
+	      b=`basename $$dir`; \
+	      $(mkinstalldirs) $(docdir)/$$b; \
+	      (cd $$dir && $(INSTALL_DATA) * $(docdir)/$$b) \
+	    fi \
+	  done \
+	fi
+
+uninstall-local:
+	rm -rf $(docdir)
+
+maintainer-clean-local:
+	if test -d liboggz; then rm -rf liboggz; fi

include/Makefile.am

+## Process this file with automake to produce Makefile.in
+
+SUBDIRS = oggz

include/oggz/Makefile.am

+## Process this file with automake to produce Makefile.in
+
+# Include files to install
+includedir = $(prefix)/include/oggz
+include_HEADERS = oggz.h oggz_constants.h
+

include/oggz/oggz_constants.h

+/*
+   Copyright (C) 2003 Commonwealth Scientific and Industrial Research
+   Organisation (CSIRO) Australia
+
+   Redistribution and use in source and binary forms, with or without
+   modification, are permitted provided that the following conditions
+   are met:
+
+   - Redistributions of source code must retain the above copyright
+   notice, this list of conditions and the following disclaimer.
+
+   - Redistributions in binary form must reproduce the above copyright
+   notice, this list of conditions and the following disclaimer in the
+   documentation and/or other materials provided with the distribution.
+
+   - Neither the name of CSIRO Australia nor the names of its
+   contributors may be used to endorse or promote products derived from
+   this software without specific prior written permission.
+
+   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+   ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
+   PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE ORGANISATION OR
+   CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
+   EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+   PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
+   PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+   LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+   NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+   SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+*/
+
+#ifndef __OGGZ_CONSTANTS_H__
+#define __OGGZ_CONSTANTS_H__
+
+/** \file
+ * General constants used by liboggz.
+ */
+
+/**
+ * Flags to oggz_new(), oggz_open(), and oggz_openfd().
+ */
+enum OggzFlags {
+  /** Read only */
+  OGGZ_READ         = 0x00,
+
+  /** Write only */
+  OGGZ_WRITE        = 0x01,
+
+  /** Disable strict adherence to mapping constraints, eg for
+   * handling an incomplete stream */
+  OGGZ_NONSTRICT    = 0x10
+};
+
+/**
+ * Flush options for oggz_write_feed; can be or'ed together
+ */
+enum OggzFlushOpts {
+  /** Flush all streams before beginning this packet */
+  OGGZ_FLUSH_BEFORE = 0x01,
+
+  /** Flush after this packet */
+  OGGZ_FLUSH_AFTER  = 0x02
+};
+
+/**
+ * Definitions of error return values