Removing the old one bsize_from_dim_lookup. Now we have a way to determine
block size for plane using its subsampling values (ss_size_lookup). And
then we can find the number of pixels in the block (num_pels_log2_lookup).

Change-Id: I6fc981da2ae093de81741d3d78eaefed11015db9

Functions scale_mv_q4 and scale_mv_q3_to_q4 were almost identical except
q3->q4 conversion in scale_mv_q3_to_q4. Now q3->q4 conversion happens
directly in vp9_build_inter_predictor.

Also adding useful constants: SUBPEL_BITS and SUBPEL_MASK.

Change-Id: Ia0a6ad2ac07c45fdf95a5139ece6286c035e9639

This changeset allows to remove vp9_switchable_interp and
vp9_switchable_interp_map arrays and make code much clear. Actually we
still have to use these mapping but only inside read_interp_filter_type and
write_interp_filter_type functions.

Change-Id: I4026c6f8c4acefba6c81421b7bacbaa52cc45f50

Change-Id: I428c4d42212b757112e3acfe5b81314cfbb5fd6b

Using it instead of long unclear verbose check
"mbmi->ref_frame[0] != INTRA_FRAME".

Change-Id: I9c7b4b3797942fa962bf3ba7460fff3084beabe9

Change-Id: I8f21c18b29f54b277fb1c167f278f109d9f3b996

Change-Id: I0e9329490828684a4fd46f540d89114cc68e8407

Removed unnecessary code lines, replaced switch with an if,
fixed spelling errors and formatting.

Change-Id: Ie48aa4604aa0ed48362ca359d792fb21b2ec1dc6

Already defined in vp9_seg_common.h.

Change-Id: I5a0e3fa15966b1ebeb77ccd506b55fc231c22342

Adding plane type check condition because it was always used outside of
get_tx_type_{4x4, 8x8, 16x16}.

Change-Id: I02f0bbfee8063474865bd903eb25b54d26e07230

Stack the rate-distortion statistics in the sub8x8 rd loop. This allows
the encoder to skip the forward transform, quantization, and coeff cost
estimation, in the sub8x8 rd optimization search, if the motion
vector(s) are of integer pixel value, and have been tested in the
previous prediction filter type rd loops of the same block.

This gives about 2% speed-up for bus_cif at 2000 kpbs, for speed 0.
Its efficacy depends how frequently the motion search will select an
integer motion vector.

Change-Id: Iee15d4283ad4adea05522c1d40b198b127e6dd97

Adding loopfilter struct with fields from MACROBLOCKD and VP9Common.
Eventually it will be moved to vp9_loopfilter.h for better code structure.

Change-Id: Iaf5fb71c33719cdfa1b991f671caf071be9ea035

Change-Id: Ia4e83913251c1cdc7aa2abd64bf01ecb1a962119

Change-Id: I9a4df095732d561807de01a41dcb1a1960726a3c

Change-Id: Ide58a74d31ff948319445a6337d2c05e98720e34

This prevents a duplicate memcpy of a 128-byte struct every time
set_scale_factors() is called (which is a lot), thus leading to a
decrease from 3.7 MB to 1.85 MB of struct copying per 64x64 block
RD/partition loop.

Overall, this decreases encoding time of the first 50 frames of bus
@ 1500kbps (speed 0) from 1min5.9 to 1min4.9, i.e. about a 1.5%
overall speedup. We can likely get more gains by removing the copy
of the other struct (and replacing it with an indexing) as well.

Change-Id: I3dceb7e79f71e6fe911b11cc994cf89a869dde7a

Change-Id: I94b97a966b5efbc9a243048f1f5ddbbdc4b1846e

This is a short term optimization till we work out a decoder
implementation requiring no frame border extension.

Change-Id: I02d15bfde4d926b50a4e58b393d8c4062d1be70f

Removing unused and duplicated constants, moving them from *.h to *.c
if possible.

Change-Id: Ief4d6b984a3ca2e9b38504f0d855ed072cf7133f

frames_since_golden / frames_till_alt_ref_frame are unused.

Change-Id: I348e7689d4d75412cf4de7703d885be942e4a26b

lg2 -> log2

Change-Id: I0602ddff49e42c9c40c29c084d04b7592b9f8edf

Implements some of the helper functions more efficiently with
lookups rathers than branches. Modeling function is consolidated
to reduce some computations.

Also merged the two enums BLOCK_SIZE_TYPES and BlockSize into
one because there is no need to keep them separate (even though
the semantics are a little different).

No bitstream or output change.

About 0.5% speedup

Change-Id: I7d71a66e8031ddb340744dc493f22976052b8f9f

Adding segmentation struct to vp9_seg_common.h. Struct members are from
macroblockd and VP9Common structs. Moving segmentation related constants
and enums to vp9_seg_common.h.

Change-Id: I23fabc33f11a359249f5f80d161daf569d02ec03

Change-Id: Ie0cb732fdcb98616a422c4463bff80642248d136

Adds a speed feature to eliminate full-rd computation if the modeled
rd or rd based on a different parameter in the same mode is already
a lot larger than the best rd yet.

Specifically, only search the sharp and smooth filters if the modeled
rd cost based on the  regular filter is within a certain factor of the
best rd cost so far. Also, skip full-rd computation of non splitmv
inter modes if the modeled rd cost based on pred error is within the
same factor of the best rd cost so far.

Also adds some enhancements in the rd search for splitmv mode to
speed things up by early breakouts. Negligible impact on performance.

Resuts on derfraw300:
psnr:    -0.013% with the splitmv enhancements, -0.24% with the rd
         breakout feature on.
speedup: 6% with splitmv enhancements, 20% with also residual breakout
         (tested on football sequence at 600 Kbps)

Change-Id: I37abc308ea9f110c1679ce649b6a7e73ab1ad5fc

converted to lookup to avoid unnecessary code

Change-Id: I2ee6a01f06984cc2c4ba74b3fffd215318f749d2

    Replace case statement with lookup.
    Small speed gain at low speed settings but at speed 2+ where the
    number of motion searches etc. falls the impact rises to ~3-4%.

    Change-Id: Idff639b7b302ee65e042b7bf836943ac0a06fad8

Change-Id: I5940719a4a161f8c26ac9a6753f1678494cec644

Change-Id: I08fc6e474ff2c12cfa065bae4989c724276e2c83

(1) Refines the modeling function and uses that to add some speed
features. Specifically, intead of using a flag use_largest_txfm as
a speed feature, an enum tx_size_search_method is used, of which
two of the types are USE_FULL_RD and USE_LARGESTALL. Two other
new types are added:
USE_LARGESTINTRA (use largest only for intra)
USE_LARGESTINTRA_MODELINTER (use largest for intra, and model for
inter)

(2) Another change is that the framework for deciding transform type
is simplified to use a heuristic count based method rather than
an rd based method using txfm_cache. In practice the new method
is found to work just as well - with derf only -0.01 down.
The new method is more compatible with the new framework where
certain rd costs are based on full rd and certain others are
based on modeled rd or are not computed. In this patch the existing
rd based method is still kept for use in the USE_FULL_RD mode.
In the other modes, the count based method is used.
However the recommendation is to remove it eventually since the
benefit is limited, and will remove a lot of complications in
the code

(3) Finally a bug is fixed with the existing use_largest_txfm speed feature
that causes mismatches when the lossless mode and 4x4 WH transform is
forced.

Results on derf:
USE_FULL_RD: +0.03% (due to change in the tables), 0% encode time reduction
USE_LARGESTINTRA: -0.21%, 15% encode time reduction (this one is a
pretty good compromise)
USE_LARGESTINTRA_MODELINTER: -0.98%, 22% encode time reduction
(currently the benefit of modeling is limited for txfm size selection,
but keeping this enum as a placeholder) .
USE_LARGESTALL: -1.05%, 27% encode-time reduction (same as existing
use_largest_txfm speed feature).

Change-Id: I4d60a5f9ce78fbc90cddf2f97ed91d8bc0d4f936

Change-Id: Ia547a5dd7650b771fd00edd673ab9f920270731c

since:
92479d95 Make update_partition_context faster

fixes:
vp9/common/vp9_blockd.h:408:22: error:
non-constant-expression cannot be narrowed from type 'int' to 'char' in
initializer list [-Wc++11-narrowing]
  char pcvalue[2] = {~(0xe << boffset), ~(0xf <<boffset)};
                     ^~~~~~~~~~~~~~~~~

Change-Id: Id5b00b9a72d00a2b314081a23879bd1fa3ce983b

Use vpx_memset for updating the partition contexts. Thanks to Noah
for pointing out the need of refactoring in this part.

Change-Id: I67fb78429d632298f1cd8a0be346cc76f79392a6

Change-Id: Ieb989830f49e6708ee7728eddebf7a2144c37c6f

Removing block index (ib) parameter from get_tx_type_{8x8, 16x16}
functions.

Change-Id: Ia213335aae7a7cb027f97b9cc9b04519840250f1

This reduced the size of the MODE_INFO array (mip and prev_mip)
by 425,568 bytes each for 1080p resolutions.

Change-Id: Ifa513ec2d0a49e8ec0867ec90620762fb7f1261d

Using MV instead of int_mv for function arguments.

Change-Id: Ic25e13dccbc98fac1fa1b3255127e00cca2a57f6

This flag no longer needed.

Change-Id: If13482015ddb92d225792ea5c0ee455d2285d1f6

These functions are not used, and appear to have been superceded.

Change-Id: I86fe51b088264f6b1b8d4d232bba97b371b98120

Change the argument of get_uv_tx_size() to be an MBMI pointer, so that the
correct column's MBMI can be passed to the function.

Change-Id: Ied6b8ec33b77cdd353119e8fd2d157811815fc98

Fixed point scaling factors are calculated once for each
reference frame by using integer division. Otherwise fixed point
scaling routines are used in all scaling calculations. This makes it
possible to calculate fixed point scaling factors on device driver
software and pass them to hardware and thus avoid division on hardware.

TODO:
 - Missing check for maximum frame dimensions
   (currently scaling uses 14 bits)
 - Missing check for maximum scaling ratio
   (upscaling 16:1, downscaling 2:1)

Problems:
 - Straightforward fixed point implementation can cause error +-1
   compared to integer division (i.e. in x_step_q4). Should only
   be an issue for frames larger than 16k.

Change-Id: I3cf4dabd610a4dc18da3bdb31ae244ebaf5d579c