Update README

Change "LIBVPX"->"LIBAOM" and "libvpx"->"libaom" and
modify the macros elsewhere to match.

Change-Id: Idbb701c733a765491d37b82a8ba3404f395c4020

README

-README - 23 March 2015
+README - 22 March 2016
 
-Welcome to the WebM VP8/VP9 Codec SDK!
+Welcome to the AOM Codec SDK!
 
 COMPILING THE APPLICATIONS/LIBRARIES:
   The build system used is similar to autotools. Building generally consists of
@@ -33,13 +33,13 @@ COMPILING THE APPLICATIONS/LIBRARIES:
 
     $ mkdir build
     $ cd build
-    $ ../libvpx/configure <options>
+    $ ../libaom/configure <options>
     $ make
 
   3. Configuration options
   The 'configure' script supports a number of options. The --help option can be
   used to get a list of supported options:
-    $ ../libvpx/configure --help
+    $ ../libaom/configure --help
 
   4. Cross development
   For cross development, the most notable option is the --target option. The
@@ -114,7 +114,7 @@ COMPILING THE APPLICATIONS/LIBRARIES:
   toolchain, the following command could be used (note, POSIX SH syntax, adapt
   to your shell as necessary):
 
-    $ CROSS=mipsel-linux-uclibc- ../libvpx/configure
+    $ CROSS=mipsel-linux-uclibc- ../libaom/configure
 
   In addition, the executables to be invoked can be overridden by specifying the
   environment variables: CC, AR, LD, AS, STRIP, NM. Additional flags can be
@@ -125,15 +125,15 @@ COMPILING THE APPLICATIONS/LIBRARIES:
   This defaults to config.log. This should give a good indication of what went
   wrong. If not, contact us for support.
 
-VP8/VP9 TEST VECTORS:
+AOM TEST VECTORS:
   The test vectors can be downloaded and verified using the build system after
   running configure. To specify an alternate directory the
-  LIBVPX_TEST_DATA_PATH environment variable can be used.
+  LIBAOM_TEST_DATA_PATH environment variable can be used.
 
   $ ./configure --enable-unit-tests
-  $ LIBVPX_TEST_DATA_PATH=../libvpx-test-data make testdata
+  $ LIBAOM_TEST_DATA_PATH=../libaom-test-data make testdata
 
 SUPPORT
   This library is an open source project supported by its community. Please
-  please email webm-discuss@webmproject.org for help.
+  please email aomediacodec-chair@jointdevelopment.kavi.com for help.
 

libs.mk

@@ -343,12 +343,12 @@ CLEAN-OBJS += $(BUILD_PFX)vpx_version.h
 ## libvpx test directives
 ##
 ifeq ($(CONFIG_UNIT_TESTS),yes)
-LIBVPX_TEST_DATA_PATH ?= .
+LIBAOM_TEST_DATA_PATH ?= .
 
 include $(SRC_PATH_BARE)/test/test.mk
 LIBVPX_TEST_SRCS=$(addprefix test/,$(call enabled,LIBVPX_TEST_SRCS))
 LIBVPX_TEST_BIN=./test_libvpx$(EXE_SFX)
-LIBVPX_TEST_DATA=$(addprefix $(LIBVPX_TEST_DATA_PATH)/,\
+LIBVPX_TEST_DATA=$(addprefix $(LIBAOM_TEST_DATA_PATH)/,\
                      $(call enabled,LIBVPX_TEST_DATA))
 libvpx_test_data_url=http://downloads.webmproject.org/test_data/libvpx/$(1)
 
@@ -375,7 +375,7 @@ testdata:: $(LIBVPX_TEST_DATA)
             echo "Checking test data:";\
             for f in $(call enabled,LIBVPX_TEST_DATA); do\
                 grep $$f $(SRC_PATH_BARE)/test/test-data.sha1 |\
-                    (cd $(LIBVPX_TEST_DATA_PATH); $${sha1sum} -c);\
+                    (cd $(LIBAOM_TEST_DATA_PATH); $${sha1sum} -c);\
             done; \
         else\
             echo "Skipping test data integrity check, sha1sum not found.";\
@@ -540,10 +540,10 @@ TEST_BIN_PATH := $(addsuffix /$(TGT_OS:win64=x64)/Release, $(TEST_BIN_PATH))
 endif
 utiltest utiltest-no-data-check:
 	$(qexec)$(SRC_PATH_BARE)/test/vpxdec.sh \
-		--test-data-path $(LIBVPX_TEST_DATA_PATH) \
+		--test-data-path $(LIBAOM_TEST_DATA_PATH) \
 		--bin-path $(TEST_BIN_PATH)
 	$(qexec)$(SRC_PATH_BARE)/test/vpxenc.sh \
-		--test-data-path $(LIBVPX_TEST_DATA_PATH) \
+		--test-data-path $(LIBAOM_TEST_DATA_PATH) \
 		--bin-path $(TEST_BIN_PATH)
 utiltest: testdata
 else
@@ -567,7 +567,7 @@ EXAMPLES_BIN_PATH := $(TGT_OS:win64=x64)/Release
 endif
 exampletest exampletest-no-data-check: examples
 	$(qexec)$(SRC_PATH_BARE)/test/examples.sh \
-		--test-data-path $(LIBVPX_TEST_DATA_PATH) \
+		--test-data-path $(LIBAOM_TEST_DATA_PATH) \
 		--bin-path $(EXAMPLES_BIN_PATH)
 exampletest: testdata
 else

test/decode_perf_test.cc

@@ -146,7 +146,7 @@ class VP9NewEncodeDecodePerfTest
   }
 
   virtual void BeginPassHook(unsigned int /*pass*/) {
-    const std::string data_path = getenv("LIBVPX_TEST_DATA_PATH");
+    const std::string data_path = getenv("LIBAOM_TEST_DATA_PATH");
     const std::string path_to_source = data_path + "/" + kNewEncodeOutputFile;
     outfile_ = fopen(path_to_source.c_str(), "wb");
     ASSERT_TRUE(outfile_ != NULL);

test/decode_to_md5.sh

@@ -19,7 +19,7 @@
 #   $VP8_IVF_FILE and $VP9_IVF_FILE are required.
 decode_to_md5_verify_environment() {
   if [ ! -e "${VP8_IVF_FILE}" ] || [ ! -e "${VP9_IVF_FILE}" ]; then
-    echo "Libvpx test data must exist in LIBVPX_TEST_DATA_PATH."
+    echo "Libvpx test data must exist in LIBAOM_TEST_DATA_PATH."
     return 1
   fi
 }

test/decode_with_drops.sh

@@ -19,7 +19,7 @@
 #   $VP8_IVF_FILE and $VP9_IVF_FILE are required.
 decode_with_drops_verify_environment() {
   if [ ! -e "${VP8_IVF_FILE}" ] || [ ! -e "${VP9_IVF_FILE}" ]; then
-    echo "Libvpx test data must exist in LIBVPX_TEST_DATA_PATH."
+    echo "Libvpx test data must exist in LIBAOM_TEST_DATA_PATH."
     return 1
   fi
 }

test/resize_util.sh

@@ -18,7 +18,7 @@
 # Environment check: $YUV_RAW_INPUT is required.
 resize_util_verify_environment() {
   if [ ! -e "${YUV_RAW_INPUT}" ]; then
-    echo "Libvpx test data must exist in LIBVPX_TEST_DATA_PATH."
+    echo "Libvpx test data must exist in LIBAOM_TEST_DATA_PATH."
     return 1
   fi
 }

test/set_maps.sh

@@ -19,7 +19,7 @@
 # $LIBVPX_BIN_PATH.
 set_maps_verify_environment() {
   if [ ! -e "${YUV_RAW_INPUT}" ]; then
-    echo "Libvpx test data must exist in LIBVPX_TEST_DATA_PATH."
+    echo "Libvpx test data must exist in LIBAOM_TEST_DATA_PATH."
     return 1
   fi
   if [ -z "$(vpx_tool_path set_maps)" ]; then

test/simple_decoder.sh

@@ -19,7 +19,7 @@
 #   $VP8_IVF_FILE and $VP9_IVF_FILE are required.
 simple_decoder_verify_environment() {
   if [ ! -e "${VP8_IVF_FILE}" ] || [ ! -e "${VP9_IVF_FILE}" ]; then
-    echo "Libvpx test data must exist in LIBVPX_TEST_DATA_PATH."
+    echo "Libvpx test data must exist in LIBAOM_TEST_DATA_PATH."
     return 1
   fi
 }

test/simple_encoder.sh

@@ -18,7 +18,7 @@
 # Environment check: $YUV_RAW_INPUT is required.
 simple_encoder_verify_environment() {
   if [ ! -e "${YUV_RAW_INPUT}" ]; then
-    echo "Libvpx test data must exist in LIBVPX_TEST_DATA_PATH."
+    echo "Libvpx test data must exist in LIBAOM_TEST_DATA_PATH."
     return 1
   fi
 }

test/tools_common.sh

@@ -118,12 +118,12 @@ test_env_var_dir() {
 }
 
 # This script requires that the LIBVPX_BIN_PATH, LIBVPX_CONFIG_PATH, and
-# LIBVPX_TEST_DATA_PATH variables are in the environment: Confirm that
+# LIBAOM_TEST_DATA_PATH variables are in the environment: Confirm that
 # the variables are set and that they all evaluate to directory paths.
 verify_vpx_test_environment() {
   test_env_var_dir "LIBVPX_BIN_PATH" \
     && test_env_var_dir "LIBVPX_CONFIG_PATH" \
-    && test_env_var_dir "LIBVPX_TEST_DATA_PATH"
+    && test_env_var_dir "LIBAOM_TEST_DATA_PATH"
 }
 
 # Greps vpx_config.h in LIBVPX_CONFIG_PATH for positional parameter one, which
@@ -293,7 +293,7 @@ cat << EOF
     \$LIBVPX_CONFIG_PATH and then the current directory.
 
     When the -test-data-path option is not specified the script attempts to use
-    \$LIBVPX_TEST_DATA_PATH and then the current directory.
+    \$LIBAOM_TEST_DATA_PATH and then the current directory.
 EOF
 }
 
@@ -302,7 +302,7 @@ EOF
 vpx_test_check_environment() {
   if [ -z "${LIBVPX_BIN_PATH}" ] || \
      [ -z "${LIBVPX_CONFIG_PATH}" ] || \
-     [ -z "${LIBVPX_TEST_DATA_PATH}" ]; then
+     [ -z "${LIBAOM_TEST_DATA_PATH}" ]; then
     return 1
   fi
 }
@@ -330,7 +330,7 @@ while [ -n "$1" ]; do
       exit
       ;;
     --test-data-path)
-      LIBVPX_TEST_DATA_PATH="$2"
+      LIBAOM_TEST_DATA_PATH="$2"
       shift
       ;;
     --prefix)
@@ -358,7 +358,7 @@ done
 # the tests on *nix/macosx.
 LIBVPX_BIN_PATH="${LIBVPX_BIN_PATH:-.}"
 LIBVPX_CONFIG_PATH="${LIBVPX_CONFIG_PATH:-.}"
-LIBVPX_TEST_DATA_PATH="${LIBVPX_TEST_DATA_PATH:-.}"
+LIBAOM_TEST_DATA_PATH="${LIBAOM_TEST_DATA_PATH:-.}"
 
 # Create a temporary directory for output files, and a trap to clean it up.
 if [ -n "${TMPDIR}" ]; then
@@ -383,19 +383,19 @@ if [ "$(is_windows_target)" = "yes" ]; then
 fi
 
 # Variables shared by tests.
-VP8_IVF_FILE="${LIBVPX_TEST_DATA_PATH}/vp80-00-comprehensive-001.ivf"
-VP9_IVF_FILE="${LIBVPX_TEST_DATA_PATH}/vp90-2-09-subpixel-00.ivf"
+VP8_IVF_FILE="${LIBAOM_TEST_DATA_PATH}/vp80-00-comprehensive-001.ivf"
+VP9_IVF_FILE="${LIBAOM_TEST_DATA_PATH}/vp90-2-09-subpixel-00.ivf"
 
-VP9_WEBM_FILE="${LIBVPX_TEST_DATA_PATH}/vp90-2-00-quantizer-00.webm"
-VP9_FPM_WEBM_FILE="${LIBVPX_TEST_DATA_PATH}/vp90-2-07-frame_parallel-1.webm"
-VP9_LT_50_FRAMES_WEBM_FILE="${LIBVPX_TEST_DATA_PATH}/vp90-2-02-size-32x08.webm"
+VP9_WEBM_FILE="${LIBAOM_TEST_DATA_PATH}/vp90-2-00-quantizer-00.webm"
+VP9_FPM_WEBM_FILE="${LIBAOM_TEST_DATA_PATH}/vp90-2-07-frame_parallel-1.webm"
+VP9_LT_50_FRAMES_WEBM_FILE="${LIBAOM_TEST_DATA_PATH}/vp90-2-02-size-32x08.webm"
 
-YUV_RAW_INPUT="${LIBVPX_TEST_DATA_PATH}/hantro_collage_w352h288.yuv"
+YUV_RAW_INPUT="${LIBAOM_TEST_DATA_PATH}/hantro_collage_w352h288.yuv"
 YUV_RAW_INPUT_WIDTH=352
 YUV_RAW_INPUT_HEIGHT=288
 
-Y4M_NOSQ_PAR_INPUT="${LIBVPX_TEST_DATA_PATH}/park_joy_90p_8_420_a10-1.y4m"
-Y4M_720P_INPUT="${LIBVPX_TEST_DATA_PATH}/niklas_1280_720_30.y4m"
+Y4M_NOSQ_PAR_INPUT="${LIBAOM_TEST_DATA_PATH}/park_joy_90p_8_420_a10-1.y4m"
+Y4M_720P_INPUT="${LIBAOM_TEST_DATA_PATH}/niklas_1280_720_30.y4m"
 
 # Setup a trap function to clean up after tests complete.
 trap cleanup EXIT
@@ -403,7 +403,7 @@ trap cleanup EXIT
 vlog "$(basename "${0%.*}") test configuration:
   LIBVPX_BIN_PATH=${LIBVPX_BIN_PATH}
   LIBVPX_CONFIG_PATH=${LIBVPX_CONFIG_PATH}
-  LIBVPX_TEST_DATA_PATH=${LIBVPX_TEST_DATA_PATH}
+  LIBAOM_TEST_DATA_PATH=${LIBAOM_TEST_DATA_PATH}
   VP8_IVF_FILE=${VP8_IVF_FILE}
   VP9_IVF_FILE=${VP9_IVF_FILE}
   VP9_WEBM_FILE=${VP9_WEBM_FILE}

test/twopass_encoder.sh

@@ -18,7 +18,7 @@
 # Environment check: $YUV_RAW_INPUT is required.
 twopass_encoder_verify_environment() {
   if [ ! -e "${YUV_RAW_INPUT}" ]; then
-    echo "Libvpx test data must exist in LIBVPX_TEST_DATA_PATH."
+    echo "Libvpx test data must exist in LIBAOM_TEST_DATA_PATH."
     return 1
   fi
 }

test/video_source.h

@@ -24,22 +24,22 @@
 
 namespace libvpx_test {
 
-// Helper macros to ensure LIBVPX_TEST_DATA_PATH is a quoted string.
+// Helper macros to ensure LIBAOM_TEST_DATA_PATH is a quoted string.
 // These are undefined right below GetDataPath
-// NOTE: LIBVPX_TEST_DATA_PATH MUST NOT be a quoted string before
+// NOTE: LIBAOM_TEST_DATA_PATH MUST NOT be a quoted string before
 // Stringification or the GetDataPath will fail at runtime
 #define TO_STRING(S) #S
 #define STRINGIFY(S) TO_STRING(S)
 
 // A simple function to encapsulate cross platform retrieval of test data path
 static std::string GetDataPath() {
-  const char *const data_path = getenv("LIBVPX_TEST_DATA_PATH");
+  const char *const data_path = getenv("LIBAOM_TEST_DATA_PATH");
   if (data_path == NULL) {
-#ifdef LIBVPX_TEST_DATA_PATH
+#ifdef LIBAOM_TEST_DATA_PATH
     // In some environments, we cannot set environment variables
     // Instead, we set the data path by using a preprocessor symbol
     // which can be set from make files
-    return STRINGIFY(LIBVPX_TEST_DATA_PATH);
+    return STRINGIFY(LIBAOM_TEST_DATA_PATH);
 #else
     return ".";
 #endif

test/vp8_multi_resolution_encoder.sh

@@ -19,7 +19,7 @@
 vp8_multi_resolution_encoder_verify_environment() {
   if [ "$(vpx_config_option_enabled CONFIG_MULTI_RES_ENCODING)" = "yes" ]; then
     if [ ! -e "${YUV_RAW_INPUT}" ]; then
-      elog "Libvpx test data must exist in LIBVPX_TEST_DATA_PATH."
+      elog "Libvpx test data must exist in LIBAOM_TEST_DATA_PATH."
       return 1
     fi
     local readonly app="vp8_multi_resolution_encoder"

test/vp8cx_set_ref.sh

@@ -18,7 +18,7 @@
 # Environment check: $YUV_RAW_INPUT is required.
 vp8cx_set_ref_verify_environment() {
   if [ ! -e "${YUV_RAW_INPUT}" ]; then
-    echo "Libvpx test data must exist in LIBVPX_TEST_DATA_PATH."
+    echo "Libvpx test data must exist in LIBAOM_TEST_DATA_PATH."
     return 1
   fi
 }

test/vp9_spatial_svc_encoder.sh

@@ -18,7 +18,7 @@
 # Environment check: $YUV_RAW_INPUT is required.
 vp9_spatial_svc_encoder_verify_environment() {
   if [ ! -e "${YUV_RAW_INPUT}" ]; then
-    echo "Libvpx test data must exist in LIBVPX_TEST_DATA_PATH."
+    echo "Libvpx test data must exist in LIBAOM_TEST_DATA_PATH."
     return 1
   fi
 }

test/vpx_temporal_svc_encoder.sh

@@ -18,7 +18,7 @@
 # Environment check: $YUV_RAW_INPUT is required.
 vpx_tsvc_encoder_verify_environment() {
   if [ ! -e "${YUV_RAW_INPUT}" ]; then
-    echo "Libvpx test data must exist in LIBVPX_TEST_DATA_PATH."
+    echo "Libvpx test data must exist in LIBAOM_TEST_DATA_PATH."
     return 1
   fi
   if [ "$(vpx_config_option_enabled CONFIG_TEMPORAL_DENOISING)" != "yes" ]; then

test/vpxdec.sh

@@ -19,7 +19,7 @@ vpxdec_verify_environment() {
   if [ ! -e "${VP8_IVF_FILE}" ] || [ ! -e "${VP9_WEBM_FILE}" ] || \
     [ ! -e "${VP9_FPM_WEBM_FILE}" ] || \
     [ ! -e "${VP9_LT_50_FRAMES_WEBM_FILE}" ] ; then
-    elog "Libvpx test data must exist in LIBVPX_TEST_DATA_PATH."
+    elog "Libvpx test data must exist in LIBAOM_TEST_DATA_PATH."
     return 1
   fi
   if [ -z "$(vpx_tool_path vpxdec)" ]; then

test/vpxenc.sh

@@ -20,13 +20,13 @@ readonly TEST_FRAMES=10
 # Environment check: Make sure input is available.
 vpxenc_verify_environment() {
   if [ ! -e "${YUV_RAW_INPUT}" ]; then
-    elog "The file ${YUV_RAW_INPUT##*/} must exist in LIBVPX_TEST_DATA_PATH."
+    elog "The file ${YUV_RAW_INPUT##*/} must exist in LIBAOM_TEST_DATA_PATH."
     return 1
   fi
   if [ "$(vpxenc_can_encode_vp9)" = "yes" ]; then
     if [ ! -e "${Y4M_NOSQ_PAR_INPUT}" ]; then
       elog "The file ${Y4M_NOSQ_PAR_INPUT##*/} must exist in"
-      elog "LIBVPX_TEST_DATA_PATH."
+      elog "LIBAOM_TEST_DATA_PATH."
       return 1
     fi
   fi