Also fix unit testing.

Change-Id: Iacdc6f1ec53388e093cda1c13e4379e83d4a6535

Added the ability to optionally filter the prediction data
when inter modes are selected (excludes SPLITMV, for now).

The mode selection loop considers both the filtered and
non-filtered prediction data when choosing mode. The filter
can be turned on/off at the frame-level, or signaled for
each MB.

Change-Id: I1b783c71d95a361ab36c761b07e8a6b06bc36822

Change-Id: I27c98025b2857e2911005a52dd57c46e2524e815

Incorporates mv_ref, mbsplit and second_mv into the adaptive
entropy framework. The mv_ref framework has been modified from
before.

Adds some clean-ups and fixes.

Results with the adaptive entropy experiment are currently up by
+1.93% on derf; +2.33% std-hd and +1.87% yt-hd.

Fixed a nasty intermittent bug.

Change-Id: I4b1ac9f9483b48432597595195bfec05f31d1e39

Change-Id: I6cbd4de96f9dcc783cef170bfd7652f6cbee36a2

Change-Id: I3582c64200eed3606a4b57a9f78624ec46041461

Change-Id: I45ea0369ad489080c2505269855a46ca1d3624f7

Change-Id: I883b4f63559c1cf66a25016e946b1b1ae98a20da

This was accidently disabled in 1fe85a35.

Change-Id: I09dbfecfe45b28dec75b27a627e3065f9c7dc8b2

Change-Id: I6802731a4d15feef5ce62993dc505ded55c40f7e

Change-Id: Iec81423e8e6c50acd9e10f69bc99ad0e9058517d

Change-Id: I97aa175346683184f9430d880593b291a563e04f

This patch incorporates adaptive entropy coding of coefficient tokens,
and mode/mv information based on distributions encountered in a frame.
Specifically, there is an initial forward update to the probabilities
in the bitstream as before for coding the symbols in the frame, however
at the end of decoding each frame, the forward update to the
probabilities is reverted and instead the probabilities are updated
towards the actual distributions encountered within the frame.
The amount of update is weighted by the number of hits within each
context.

Results on derf/hd/std-hd are all up by 1.6%.

On derf, the most of the gains come from coefficients, however for the
hd and std-hd sets, the most of the gains come from the mode/mv
information updates.

Change-Id: I708c0e11fdacafee04940fe7ae159ba6844005fd

Updates idct/dequant mmx assembly to work with vpnext instead of vp8.

Also adds x86inc.asm

Change-Id: I6e147d5e89177ae449271e97e50d082eb11b078e

This commit is to remove two arrays, which contain the probabilities
of how likely each probability in coef_probs table is updated. The
commit changed to use a fixed number "252".

Surprisedly, the overall impact on quality is close to zero, which
basically says the two big static arrays are not helpful at all.
derf: -0.016%, -0.020%
std-hd: 0.000%, -0.013%
yt: -0.022%, +0.007%
yt-hd: -0.038%, +0.034%

Change-Id: Ifee94d28a37dcab4f1d2b994bd5b07575be42b72

This commit added the ability to accumulate the coef stats across
different encodings using an intermediate binary stats files. The
accumulation happens only the binary stats file exists in current
directory. The encoder needs to be built with "ENTROPY_STATS" to
allow the output. The commit also fixed a few formating issues in
output stats file.

Change-Id: Ib1a41180aa554845cf51e4421a230b128a3a82b4

Changes to calculation of  sr_coded_error to include 0,0 case.

Experimental use of sr_coded_error in calculating correction factor
for estimating the allowable Q range.

Reinstated some code needed for calculating section_intra_rating.

Add flash detection in calculation of KF boost

Increased tolerance in testing candidate key frames (needed with
longer motion search as this tends to slightly increase inter %.

Zbin changes for 8x8.

Other minor adjustments, refactoring and bug fixes.

Reinstated some motion break out clauses in boost loop
as their removal hurt a few 50fps  clips badly in the std set.
It may be possible to remove them again later if a better way
can be found of preventing overly long gf intervals.

Change-Id: Iee686d0c31072828bb1ccd2bc63f5f1c7c548ea2

Changes to the equations for kf and gf minQ and to
the boost calculations for kg and gf

Change-Id: I312031c910e6a575334f49075c32f49a8dfff239

Variables m & mi were being dereferenced when they might
hold invalid values.

The fix is simply to move these dereferences to after the
point at which mb_row and mb_col are tested for validity.

Change-Id: Ib16561efa9792dc469759936189ea379d374ad20

This fix addresses some problems with very complex clips like
handling of flashes on clips like crew (which was made worse
by an earlier patch (derf and std-hd)).

Most clips a small effect but some between 1 & 2%

Derf +0.039, +0.211%
YT +0.042, +0.083%

Change-Id: I65fc7c13afc31482040068544dd65b8808f5cb4a

Removed the local scaling factor est_max_qcorrection_factor
and related code to simplify estimateq calculation (little effect
anyway)

Cap range of total correction factor.

Slight change to break out case to turn off arf.

Change-Id: I748187737ba93cfadf016f3dfdf8d2741934067f

One more compiling issue, only happened in Visual C under a specific
combination of experiments.

Change-Id: Iba0775dc0ea7342b556348a9cdf60a05a59e0241

the commit fixed a number of compiling issues when some epxeriments
are turned on at the same time.

Change-Id: Idb15b215e2d2a7d25f2707f99ef55a34e7301ce7

The commit changed how baseline 8x8 coefficient probabilities are
initialized, to be consistent with the initialization of baseline
4x4 coefficient probabilities.

The commit does not have any effect on compression.

Change-Id: Ifb3902b5dc0b0c2e6dc3aa5d4a6589d528e58355

Remove dependency on amount and speed of motion as this
may not behave well across different image sizes.

Tweak impact of % inter.

Add in experimental adjustment based on relative quality of an
older second reference frame.

Cap range of decay values allowed.

Some small + effect on derf but -ve on yt & hd at this stage.

Change-Id: I390d6f6ebe67a2eb0b834980d0d4650124980d3e

I now see I didn't write a very long description, so let's do it
here then. We took a pretty big quality hit (0.1-0.2%) from my
recent fix of the inversion of arguments to vp8_cost_bit() in the
RD reference frame costing. I looked into it and basically the
costing prevented us from switching reference frames. This is of
course silly, since each frame codes its own prob_intra_coded, so
using last frame cost indications as a limiting factor can never
be right.

Here, I've rewritten that code to estimate costings based partially
on statistics from progress on current frame encoding. Overall,
this gives us a ~0.2%-0.3% improvement over what we had previously
before my argument-inversion-fix, and thus about ~0.4% over current
git (on derf-set), and a little more (0.5-1.0%) on HD/STD-HD/YT.

Change-Id: I79ebd4ccec4d6edbf0e152d9590d103ba2747775

base the static image test off a measure of 0,0 motion
instead of the decay accumulator value.

Change "transition to still detection" to compare the
decay rate from successive frames.

Minor tweak to the arf extra boost given based on the
number of frames affected.

Removed unused variable mod_err_per_mb_accumulator.

Change-Id: Idd8360083ad409e45f133ce97dd2488259003e64