Change /build to -build to avoid problems when builds are run within
msys bash shells.

Change-Id: Ie68d72f702adad00d99be8a01c7a388c3af7657d

Add targets x86-win32-vs9 and x86_64-win64-vs9 for support of Visual
Studio 2008-- this removes the need to convert the vs8 projects before
using them within the IDE.

Change-Id: Idb83e2ae701e07d98db1be71638280a493d770a2

Change submitted for Adrian Grange. Convert threshold
calculation in ARNR filter to a lookup table.

Change-Id: I12a4bbb96b9ce6231ce2a6ecc2d295610d49e7ec

Change maximum ARNR filter width to 15.

Change-Id: I3b72450ea08e96287445ec18810630ee2292954c

Previously we had assumed that it was necessary to give a full frame's
bit allocation to the alt ref frame if it has been created through temporal
filtering. This is not the case. The active max quantizer control
insures that sufficient bits are allocated if needed and allocating a
full frame's worth of bits creates an excessive overhead for the ARF.

Change-Id: I83c95ed7bc7ce0e53ccae6ff32db5a97f145937a

Change-Id: I37f10fbe4fbb505c1d34980a59af3e817c287e22

Disables the warnings produced for so-called insecure standard C
functions.

Change-Id: I0e6f448e27f899a0eaefc1151185945fbe15718e

The issue was caused by a bad merge in Change I5559d1e8

Change-Id: I6563f652bc1500202de361f8f51d11cc6ddf3331

Signed-off-by: Michael Kohler <michaelkohler@live.com>

Signed-off-by: Michael Kohler <michaelkohler@live.com>

In the case where the best reference mv is not (0,0) a secondary
search is carried out centered on (0,0). However, rather than
sending tmp_err into the search function, motion_error was
inadvertently passed.

As a result tmp_err remains set at INT_MAX and the (0,0)-based
search result will never be selected, even if it is better.

Change-Id: I3c82b246c8c82ba887b9d3fb4c9e0a0f2fe5a76c

Change I9fd1a5a4 updated the multithreaded loopfilter to avoid
reinitializing several parameteres if they haven't changed from the
last frame, but the code to update the last frame's parameters wasn't
invoked in the multithreaded case.

Change-Id: Ia23d937af625c01dd739608e02d110f742b7e1f2

Modified loopfilter initialization to avoid unnecessary operations.

Change-Id: I9fd1a5a49edc1cb8116c2a72a6908b1e437459ec

Restructured and rewrote SSE2 loopfilter functions. Combined u and
v into one function to take advantage of SSE2 128-bit registers.
Tests on test clips showed a 4% decoder performance improvement on
Linux desktop.

Change-Id: Iccc6669f09e17f2224da715f7547d6f93b0a4987

The generated project is vpx.vcproj, change vpx_decoder references to
match. Remove .rules file dependency as it will be pulled from the
source tree.

Change-Id: I679db2748b37adae3bafd764dba8575fc3abde72

Following conversations with Tim T (Derf) I ran a large number of
tests comparing the existing polynomial expression with a simpler
^2 variant. Though the polynomial was sometimes a little better at
the extremes of Q it was possible to get close for most clips and
even a little better on some.

This code also changes the way the RD multiplier is calculated
when the ZBIN is extended to use a variant of the same ^2
expression.

I hope that this simpler expression will be easier to tune further
as we expand our test set and consider adjustments based on content.

Change-Id: I73b2564346e74d1332c33e2c1964ae093437456c

Besides the slight improvement in round trip error. This
also fixes a sign bias in the forward transform, so the
round trip errors are evenly distributed between +1s and
-1s. The old bias seemed to work well with the dc sign bias
in old fdct,  which no longer exist in the improved fdct.

Change-Id: I8635e7be16c69e69a8669eca5438550d23089cef

Corrected setting of "which_buffer" for U & V cases to match that
used for Y, i.e. to refer to the temporally most recent frame of
those to be filtered.

Change-Id: Idf94b287ef47a05f060da3e61134a0b616adcb6b

Change-Id: Ib479210067510162879c368428b92690591120b2

The new fdct lowers the round trip sum squared error for a
4x4 block ~0.12. or ~0.008/pixel. For reference, the old
matrix multiply version has average round trip error 1.46
for a 4x4 block.

Thanks to "derf" for his suggestions and references.

Change-Id: I5559d1e81d333b319404ab16b336b739f87afc79

bestsad needs to be a int and set to INT_MAX because at the end
of the function it is compared to INT_MAX to determine if there
was a match in the function.

Change-Id: Ie80e88e4c4bb4a1ff9446079b794d14d5a219788

bestsad should be an int initialized to INT_MAX.  The optimized
SAD function expects a signed value for bestsad to use for comparison
and early loop termination.  When no match is made, which is
determined by a comparison of bestsad to INT_MAX, INT_MAX is returned.

These are mostly vestigial, it's up to the compiler to decide what
should be inlined, and this collided with certain Windows platform SDKs.

Change-Id: I80dd35de25eda7773156e355b5aef8f7e44e179b

This option is vestigial and is unreferenced.

Change-Id: I8bd27cb674c263e9a86fb43244003a9b9df3ca9c

ivfenc was setting the VPX_KF_FIXED mode when the kf_min_dist and
kf_max_dist parameters were set to each other. This flag actually means
that keyframes are disabled, and that name was deprecated to avoid
confusion such as this. Instead, a new option is exposed for setting the
VPX_KF_DISABLED mode, and the intervals are passed through to the codec,
which will do automatic placement at a fixed interval as expected.

Change-Id: I15abbec5936f39d5901878b4bc154372fbc23a43

1. Unavailability of each reference frame type should be tested
independently,
2. Also, only the VP8_GOLD_FLAG needs to be tested before setting
golden frame specific thresholds, and only VP8_ALT_FLAG needs
testing before setting thresholds relevant to the AltRef frame.
(Raised by gbvalor, in response to Issue 47)

Change-Id: I6a06fc2a6592841d85422bc1661e33349bb6c3b8

Since the intent is
to reset the appropriate bit in ref_frame_flags not to
test a logic condition. Prior result would always have
been ref_frame_flags being set to 0.
(Issue reported by dgohman, issue 47)

Change-Id: I2c12502ed74c73cf38e98c9680e0249c29e16433