1. 27 Jun, 2012 1 commit
    • Adrian Grange's avatar
      Added Prediction Filter to Mode Selection · bbc926dc
      Adrian Grange authored
      Added the ability to optionally filter the prediction data
      when inter modes are selected (excludes SPLITMV, for now).
      
      The mode selection loop considers both the filtered and
      non-filtered prediction data when choosing mode. The filter
      can be turned on/off at the frame-level, or signaled for
      each MB.
      
      Change-Id: I1b783c71d95a361ab36c761b07e8a6b06bc36822
      bbc926dc
  2. 26 Jun, 2012 1 commit
    • Deb Mukherjee's avatar
      Continued adaptive entropy coding · f3dff402
      Deb Mukherjee authored
      Incorporates mv_ref, mbsplit and second_mv into the adaptive
      entropy framework. The mv_ref framework has been modified from
      before.
      
      Adds some clean-ups and fixes.
      
      Results with the adaptive entropy experiment are currently up by
      +1.93% on derf; +2.33% std-hd and +1.87% yt-hd.
      
      Fixed a nasty intermittent bug.
      
      Change-Id: I4b1ac9f9483b48432597595195bfec05f31d1e39
      f3dff402
  3. 25 Jun, 2012 1 commit
  4. 20 Jun, 2012 3 commits
  5. 19 Jun, 2012 3 commits
  6. 18 Jun, 2012 4 commits
  7. 15 Jun, 2012 2 commits
    • Deb Mukherjee's avatar
      Adaptive entropy coding of coefficients, modes, mv. · 1fe85a35
      Deb Mukherjee authored
      This patch incorporates adaptive entropy coding of coefficient tokens,
      and mode/mv information based on distributions encountered in a frame.
      Specifically, there is an initial forward update to the probabilities
      in the bitstream as before for coding the symbols in the frame, however
      at the end of decoding each frame, the forward update to the
      probabilities is reverted and instead the probabilities are updated
      towards the actual distributions encountered within the frame.
      The amount of update is weighted by the number of hits within each
      context.
      
      Results on derf/hd/std-hd are all up by 1.6%.
      
      On derf, the most of the gains come from coefficients, however for the
      hd and std-hd sets, the most of the gains come from the mode/mv
      information updates.
      
      Change-Id: I708c0e11fdacafee04940fe7ae159ba6844005fd
      1fe85a35
    • Daniel Kang's avatar
  8. 12 Jun, 2012 6 commits
    • Daniel Kang's avatar
      Adds x86inc.asm and update idct/dequant mmx · 7a000715
      Daniel Kang authored
      Updates idct/dequant mmx assembly to work with vpnext instead of vp8.
      
      Also adds x86inc.asm
      
      Change-Id: I6e147d5e89177ae449271e97e50d082eb11b078e
      7a000715
    • Yaowu Xu's avatar
      changed to use a fixed number for update probabity · 074a38b1
      Yaowu Xu authored
      This commit is to remove two arrays, which contain the probabilities
      of how likely each probability in coef_probs table is updated. The
      commit changed to use a fixed number "252".
      
      Surprisedly, the overall impact on quality is close to zero, which
      basically says the two big static arrays are not helpful at all.
      derf: -0.016%, -0.020%
      std-hd: 0.000%, -0.013%
      yt: -0.022%, +0.007%
      yt-hd: -0.038%, +0.034%
      
      Change-Id: Ifee94d28a37dcab4f1d2b994bd5b07575be42b72
      074a38b1
    • Yaowu Xu's avatar
      Added the ability to accumulate coef stats across encodings · bb25083d
      Yaowu Xu authored
      This commit added the ability to accumulate the coef stats across
      different encodings using an intermediate binary stats files. The
      accumulation happens only the binary stats file exists in current
      directory. The encoder needs to be built with "ENTROPY_STATS" to
      allow the output. The commit also fixed a few formating issues in
      output stats file.
      
      Change-Id: Ib1a41180aa554845cf51e4421a230b128a3a82b4
      bb25083d
    • Paul Wilkins's avatar
    • Paul Wilkins's avatar
    • Paul Wilkins's avatar
      Merge of further two pass rc clean up and adjustments. · 7eb66d82
      Paul Wilkins authored
      Changes to calculation of  sr_coded_error to include 0,0 case.
      
      Experimental use of sr_coded_error in calculating correction factor
      for estimating the allowable Q range.
      
      Reinstated some code needed for calculating section_intra_rating.
      
      Add flash detection in calculation of KF boost
      
      Increased tolerance in testing candidate key frames (needed with
      longer motion search as this tends to slightly increase inter %.
      
      Zbin changes for 8x8.
      
      Other minor adjustments, refactoring and bug fixes.
      
      Reinstated some motion break out clauses in boost loop
      as their removal hurt a few 50fps  clips badly in the std set.
      It may be possible to remove them again later if a better way
      can be found of preventing overly long gf intervals.
      
      Change-Id: Iee686d0c31072828bb1ccd2bc63f5f1c7c548ea2
      7eb66d82
  9. 08 Jun, 2012 1 commit
    • Paul Wilkins's avatar
      Key frame and GF sizing changes. · 0cb4985b
      Paul Wilkins authored
      Changes to the equations for kf and gf minQ and to
      the boost calculations for kg and gf
      
      Change-Id: I312031c910e6a575334f49075c32f49a8dfff239
      0cb4985b
  10. 31 May, 2012 1 commit
    • Adrian Grange's avatar
      Fixed bug where invalid pointer is dereferenced · 04fa2ecd
      Adrian Grange authored
      Variables m & mi were being dereferenced when they might
      hold invalid values.
      
      The fix is simply to move these dereferences to after the
      point at which mb_row and mb_col are tested for validity.
      
      Change-Id: Ib16561efa9792dc469759936189ea379d374ad20
      04fa2ecd
  11. 30 May, 2012 1 commit
    • Paul Wilkins's avatar
      Rate control fix. · b8c36905
      Paul Wilkins authored
      This fix addresses some problems with very complex clips like
      handling of flashes on clips like crew (which was made worse
      by an earlier patch (derf and std-hd)).
      
      Most clips a small effect but some between 1 & 2%
      
      Derf +0.039, +0.211%
      YT +0.042, +0.083%
      
      Change-Id: I65fc7c13afc31482040068544dd65b8808f5cb4a
      b8c36905
  12. 29 May, 2012 2 commits
  13. 26 May, 2012 1 commit
    • Yaowu Xu's avatar
      fixed one more compiling issue with VC · 2722cfb4
      Yaowu Xu authored
      One more compiling issue, only happened in Visual C under a specific
      combination of experiments.
      
      Change-Id: Iba0775dc0ea7342b556348a9cdf60a05a59e0241
      2722cfb4
  14. 25 May, 2012 2 commits
  15. 23 May, 2012 1 commit
    • Yaowu Xu's avatar
      changed the way that default probs for 8x8 is set. · e9818bb6
      Yaowu Xu authored
      The commit changed how baseline 8x8 coefficient probabilities are
      initialized, to be consistent with the initialization of baseline
      4x4 coefficient probabilities.
      
      The commit does not have any effect on compression.
      
      Change-Id: Ifb3902b5dc0b0c2e6dc3aa5d4a6589d528e58355
      e9818bb6
  16. 18 May, 2012 1 commit
  17. 17 May, 2012 2 commits
  18. 15 May, 2012 7 commits
    • Ronald S. Bultje's avatar
      Rewrite reference frame costing in the RD loop. · 0b8a95a0
      Ronald S. Bultje authored
      I now see I didn't write a very long description, so let's do it
      here then. We took a pretty big quality hit (0.1-0.2%) from my
      recent fix of the inversion of arguments to vp8_cost_bit() in the
      RD reference frame costing. I looked into it and basically the
      costing prevented us from switching reference frames. This is of
      course silly, since each frame codes its own prob_intra_coded, so
      using last frame cost indications as a limiting factor can never
      be right.
      
      Here, I've rewritten that code to estimate costings based partially
      on statistics from progress on current frame encoding. Overall,
      this gives us a ~0.2%-0.3% improvement over what we had previously
      before my argument-inversion-fix, and thus about ~0.4% over current
      git (on derf-set), and a little more (0.5-1.0%) on HD/STD-HD/YT.
      
      Change-Id: I79ebd4ccec4d6edbf0e152d9590d103ba2747775
      0b8a95a0
    • Paul Wilkins's avatar
      Further firstpass.c changes. · acf3c729
      Paul Wilkins authored
      base the static image test off a measure of 0,0 motion
      instead of the decay accumulator value.
      
      Change "transition to still detection" to compare the
      decay rate from successive frames.
      
      Minor tweak to the arf extra boost given based on the
      number of frames affected.
      
      Removed unused variable mod_err_per_mb_accumulator.
      
      Change-Id: Idd8360083ad409e45f133ce97dd2488259003e64
      acf3c729
    • Deb Mukherjee's avatar
      Adds new Directional Intra prediction modes. · c5ddb7f0
      Deb Mukherjee authored
      Adds 6 directional intra predictiom modes for 16x16 and 8x8 blocks.
      
      Change-Id: I25eccc0836f28d8d74922e4e9231568a648b47d1
      c5ddb7f0
    • Paul Wilkins's avatar
      520a7a25
    • Paul Wilkins's avatar
      545bc721
    • Paul Wilkins's avatar
      a1680ad3
    • Yaowu Xu's avatar
      Changed to use integer 8x8 dct · b22cc559
      Yaowu Xu authored
      The commit added an integer version of 8x8 forward DCT, based on the
      orginal forward DCT from VP6. The constants, roundings, and shifts
      were adjusted to improve the accuracy. The latest patch has a very
      similar accuracy in term of round trip error against the floating
      point version.
      
      It should be noted here that the purpose of the patch is to help
      encoding speed and facilitate all other experiments. There will be
      futher review in combination with inverse DCT before finalization.
      
      configure with "--enable--int_8x8fdct" to use the integer version
      
      Change-Id: I5a4f80507429f0e07cf02a13768ec81cbfddc5bc
      b22cc559