Change-Id: Id7d1f25078be92dd6cda246738ad6fb50579f555

Change-Id: I74e50b4dfbe73eb98e1dce1695a9973f637220c0

Approximate the Google style guide[1] so that that there's a written
document to follow and tools to check compliance[2].

[1]: http://google-styleguide.googlecode.com/svn/trunk/cppguide.xml
[2]: http://google-styleguide.googlecode.com/svn/trunk/cpplint/cpplint.py

Change-Id: Idf40e3d8dddcc72150f6af127b13e5dab838685f

This is a code snapshot of experimental work currently ongoing for a
next-generation codec.

The codebase has been cut down considerably from the libvpx baseline.
For example, we are currently only supporting VBR 2-pass rate control
and have removed most of the code relating to coding speed, threading,
error resilience, partitions and various other features.  This is in
part to make the codebase easier to work on and experiment with, but
also because we want to have an open discussion about how the bitstream
will be structured and partitioned and not have that conversation
constrained by past work.

Our basic working pattern has been to initially encapsulate experiments
using configure options linked to #IF CONFIG_XXX statements in the
code. Once experiments have matured and we are reasonably happy that
they give benefit and can be merged without breaking other experiments,
we remove the conditional compile statements and merge them in.

Current changes include:
* Temporal coding experiment for segments (though still only 4 max, it
  will likely be increased).
* Segment feature experiment - to allow various bits of information to
  be coded at the segment level. Features tested so far include mode
  and reference frame information, limiting end of block offset and
  transform size, alongside Q and loop filter parameters, but this set
  is very fluid.
* Support for 8x8 transform - 8x8 dct with 2nd order 2x2 haar is used
  in MBs using 16x16 prediction modes within inter frames.
* Compound prediction (combination of signals from existing predictors
  to create a new predictor).
* 8 tap interpolation filters and 1/8th pel motion vectors.
* Loop filter modifications.
* Various entropy modifications and changes to how entropy contexts and
  updates are handled.
* Extended quantizer range matched to transform precision improvements.

There are also ongoing further experiments that we hope to merge in the
near future: For example, coding of motion and other aspects of the
prediction signal to better support larger image formats, use of larger
block sizes (e.g. 32x32 and up) and lossless non-transform based coding
options (especially for key frames). It is our hope that we will be
able to make regular updates and we will warmly welcome community
contributions.

Please be warned that, at this stage, the codebase is currently slower
than VP8 stable branch as most new code has not been optimized, and
even the 'C' has been deliberately written to be simple and obvious,
not fast.

The following graphs have the initial test results, numbers in the
tables measure the compression improvement in terms of percentage. The
build has  the following optional experiments configured:
--enable-experimental --enable-enhanced_interp --enable-uvintra
--enable-high_precision_mv --enable-sixteenth_subpel_uv

CIF Size clips:
http://getwebm.org/tmp/cif/
HD size clips:
http://getwebm.org/tmp/hd/
(stable_20120309 represents encoding results of WebM master branch
build as of commit#7a159071)

They were encoded using the following encode parameters:
--good --cpu-used=0 -t 0 --lag-in-frames=25 --min-q=0 --max-q=63
--end-usage=0 --auto-alt-ref=1 -p 2 --pass=2 --kf-max-dist=9999
--kf-min-dist=0 --drop-frame=0 --static-thresh=0 --bias-pct=50
--minsection-pct=0 --maxsection-pct=800 --sharpness=0
--arnr-maxframes=7 --arnr-strength=3(for HD,6 for CIF)
--arnr-type=3

Change-Id: I5c62ed09cfff5815a2bb34e7820d6a810c23183c

Remove error concealment code.

Change-Id: I882705174fbfea212e96f7f684e47a671dbe5c67

The error-concealer is plugged in after any motion vectors have been
decoded. It tries to estimate any missing motion vectors from the
motion vectors of the previous frame. Intra blocks with missing
residual are replaced with inter blocks with estimated motion vectors.

This feature was developed in a separate sandbox
(sandbox/holmer/error-concealment).

Change-Id: I5c8917b031078d79dbafd90f6006680e84a23412

Change-Id: I9467d7a50eac32d8e8f3a2f26db818e47c93c94b

This change simply exercises the VP8D_GET_FRAME_CORRUPTED control,
outputting a warning message at the end if the bit was set for any
frames. Should never produce any output for good input.

Change-Id: Idaf6ba8f53660f47763cd563fa1485938580a37d

Adds following targets to configure script to support RVCT compilation
without operating system support (for Profiler or bare metal images).
 - armv5te-none-rvct
 - armv6-none-rvct
 - armv7-none-rvct

To strip OS specific parts from the code "os_support"-config was added
to script and CONFIG_OS_SUPPORT flag is used in the code to exclude OS
specific parts such as OS specific includes and function calls for
timers and threads etc. This was done to enable RVCT compilation for
profiling purposes or running the image on bare metal target with
Lauterbach.

Removed separate AREA directives for READONLY data in armv6 and neon
assembly files to fix the RVCT compilation. Otherwise
"ldr <reg>, =label" syntax would have been needed to prevent linker
errors. This syntax is not supported by older gnu assemblers.

Change-Id: I14f4c68529e8c27397502fbc3010a54e505ddb43

The sz member of the vpx_codec_stream_info_t structure must be
initialized when passed to vpx_codec_peek_stream_info().

Change-Id: I2d13d287d9639262b932cf44671a595fdf3c38ef

Debugging in postproc needs more flags to allow for specific
block types to be turned on or off in the visualizations.

Must be enabled with --enable-postproc-visualizer during
configuration time.

Change-Id: Ia74f357ddc3ad4fb8082afd3a64f62384e4fcb2d

If this function fails silently, the nestegg context is destroyed and
future nestegg calls will segfault.

Change-Id: Ie6a0ea284ab9ddfa97b1843ef8030a953937c8cd

STDIO streams are opened in text mode by default on Windows. This patch
changes the stdin/stdout streams to be in binary mode if they are being
used for I/O from the vpxenc or vpxdec tools.

Fixes issue #216. Thanks to mw AT hesotech.de for the fix.

Change-Id: I34525b3ce2a4a031d5a48d36df4667589372225b

This eliminates a large set of warnings exposed by the Mozilla build
 system (Use of C++ comments in ISO C90 source, commas at the end of
 enum lists, a couple incomplete initializers, and signed/unsigned
 comparisons).
It also eliminates many (but not all) of the warnings expose by newer
 GCC versions and _FORTIFY_SOURCE (e.g., calling fread and fwrite
 without checking the return values).
There are a few spurious warnings left on my system:

../vp8/encoder/encodemb.c:274:9: warning: 'sz' may be used
 uninitialized in this function
gcc seems to be unable to figure out that the value shortcut doesn't
 change between the two if blocks that test it here.

../vp8/encoder/onyx_if.c:5314:5: warning: comparison of unsigned
 expression >= 0 is always true
../vp8/encoder/onyx_if.c:5319:5: warning: comparison of unsigned
 expression >= 0 is always true
This is true, so far as it goes, but it's comparing against an enum,
 and the C standard does not mandate that enums be unsigned, so the
 checks can't be removed.

Change-Id: Iead6cd561a2afaa3d801fd63f1d8d58953da7426

This eliminates a large set of warnings exposed by the Mozilla build
 system (Use of C++ comments in ISO C90 source, commas at the end of
 enum lists, a couple incomplete initializers, and signed/unsigned
 comparisons).
It also eliminates many (but not all) of the warnings expose by newer
 GCC versions and _FORTIFY_SOURCE (e.g., calling fread and fwrite
 without checking the return values).
There are a few spurious warnings left on my system:

../vp8/encoder/encodemb.c:274:9: warning: 'sz' may be used
 uninitialized in this function
gcc seems to be unable to figure out that the value shortcut doesn't
 change between the two if blocks that test it here.

../vp8/encoder/onyx_if.c:5314:5: warning: comparison of unsigned
 expression >= 0 is always true
../vp8/encoder/onyx_if.c:5319:5: warning: comparison of unsigned
 expression >= 0 is always true
This is true, so far as it goes, but it's comparing against an enum, and the C
 standard does not mandate that enums be unsigned, so the checks can't be
 removed.

Change-Id: Iaf689ae3e3d0ddc5ade00faa474debe73b8d3395

Specifiying the output file is meaningless when we're not writing to
it.

Change-Id: I271e1d3ae1994d79f0773747477124600f98ca58

This allows multiple post processor debug levels to be overlayed.
i.e. can show colored reference blocks and visual motion vectors.

Change-Id: Ic4a1df438445b9f5780fe73adb3126e803472e53

This patch reworks the default behavior of the tool to output Y4M
instead of writing individual raw frames. The relevant controls are
now:
  --yv12, --i420  - These options change the output format to be
                    raw planar data. The output will be Y4M unless
                    one of these options is specified.

  --flipuv        - Swaps the chroma planes. Works with Y4M output.

  -o, --output    - Sets the output filename. Defaults to stdout if
                    not specified. Supports escape character
                    expansion for frame width (%w) height (%h) and
                    sequence number (%1..%9). The --prefix option
                    has been removed in favor of this escape
                    expansion.

Since the output defaults to stdout if -o is not specified, an
error will be thrown if stdout is not connected to a pipe. This
can be overridden by specifying '-o -'.

Change-Id: I94e42c57ca75721fdd57a6129e79bcdb2afe5d4d

Be quiet by default, to play nicer with scripts.

Change-Id: I68f6c88411fd5487566f268fb73b4e55ae64410c

Update the timing information in-place for the --progress
option.

Change-Id: I8efea57050db72963c0bc5c994425e7e692d1502

The new WebM output support should be preferred to IVF, but we can't
change the default behavior of the ivf* tools. There are a few other
default behaviors for these tools that are counterintuitive for
historical reasons, and changing the binary name provides the
opportunity to clean those up as well. This patch takes the first
step by renaming the binaries.

Change-Id: I647008ae37cc352dd27ec1da7ed13489e0609b24

The width and height needed to write the Y4M header can be found by
probing the stream with vpx_codec_peek_stream_info(). This also
has the consequence of supporting multiple codecs from raw files
with automatic detections, should we add additional codecs in the
future.

Change-Id: I7522a8f4c7577b6ed9876d744c59cd86d30c6049

This patch enables ivfdec to decode WebM files. WebM demuxing is
provided by the Matthew Gregan's Nestegg library.

This patch also makes minor changes to the timebase->framerate
handling when doing Y4M output. For WebM files, the framerate is
guessed by looking at the first second of video. For IVF files,
the timebase=1/(2*fps) hack is still in place, but is only used
if the timebase denominator is less than 1000. This is in anticipation
of change I8d25b5b, which introduces the distinction between
framerate and timebase to ivfenc. In the case of high resolution
timebases, like 100ns, we would have to guess the framerate
like we do for WebM, but since WebM support in ivfenc will
deprecate IVF output, we just assume 30fps rather than writing the
lookahead code.

Change-Id: I1dd8600f13bf6071533d2816f005da9ede4f60a2

An earlier automatic transform changed eg '\nOptions' to '\n_options'
which is incorrect in these printfs. Fix these.

Change-Id: I7e0f37931ef82b79fadddd7058ce0df5572e2ca1

Changes 'The VP8 project' to 'The WebM project', for consistency
with other webmproject.org repositories.

Fixes issue #97.

Change-Id: I37c13ed5fbdb9d334ceef71c6350e9febed9bbba

When the license headers were updated, they accidentally contained
trailing whitespace, so unfortunately we have to touch all the files
again.

Change-Id: I236c05fade06589e417179c0444cb39b09e4200d

The RSA Data Security, Inc. implementation license bears a requirement
similar to the old problematic BSD license with advertising clause.

Change-Id: I877b71ff0548934b1c4fd87245696f53dedbdf26

Change-Id: Ieebea089095d9073b3a94932791099f614ce120c

These files can be played back directly in most major open-source media
 frameworks without the need for additional patches or parameters.

Change-Id: I59f98c1658298245c688f7d107cf393445e470d5

The PLANE_{PACKED,Y,U,V,ALPHA} macros should be renamed to be within the
VPX_ namespace.

Fixes #27

This renames the vpx_codec/ directory to vpx/, to allow applications
to more consistently reference these includes with the vpx/ prefix.
This allows the includes to be installed in /usr/local/include/vpx
rather than polluting the system includes directory with an
excessive number of includes.

Change-Id: I7b0652a20543d93f38f421c60b0bbccde4d61b4f