1. 16 Aug, 2010 1 commit
  2. 13 Aug, 2010 1 commit
    • John Koleszar's avatar
      move segmentation_common to encoder · 80d3923a
      John Koleszar authored
      vp8_update_gf_useage_maps() is only used by the encoder. This patch
      fixes the ability to build in decode-only or encode-only
      configurations.
      
      Change-Id: I3a5211428e539886ba998e09e8abd747ac55c9aa
      80d3923a
  3. 12 Aug, 2010 4 commits
    • Johann's avatar
      framework for assembly version of the detokenizer · 9602799c
      Johann authored
      adds a compile time option: --enable-arm-asm-detok which pulls in
      vp8/decoder/arm/detokenize.asm
      
      currently about break even speed wise, but changes are pending to
      the fill code (branch and load 3 bytes versus conditionally always
      load one) and the error handling. Currently it doesn't handle zero
      runs or overrunning the buffer.
      
      this is really just so i don't have to rebase my changes all the
      time to run benchmarks - now just need to replace one file!
      
      Change-Id: I56d0e2354dc0ca3811bffd0e88fe1f952fa6c797
      9602799c
    • Johann's avatar
      update structure · 633646b7
      Johann authored
      mode_info_context->mbmi no longer gets copied up a level
      
      Change-Id: Icd2d27d381909721326c34594a1ccdc26d48a995
      633646b7
    • Johann's avatar
      remove unused definition · 1ec7981c
      Johann authored
      asm_offsets contains some definitions which are no longer used. this
      was one of them. v6 build works now
      
      Change-Id: If370cfa8acd145de4fead2d9a11b048fccc090df
      1ec7981c
    • Scott LaVarnway's avatar
      Removed unnecessary MB_MODE_INFO copies · 9c7a0090
      Scott LaVarnway authored
      These copies occurred for each macroblock in the encoder and decoder.
      Thetemp MB_MODE_INFO mbmi was removed from MACROBLOCKD.  As a result,
      a large number compile errors had to be fixed.
      
      Change-Id: I4cf0ffae3ce244f6db04a4c217d52dd256382cf3
      9c7a0090
  4. 11 Aug, 2010 9 commits
    • Scott LaVarnway's avatar
      f5615b61
    • John Koleszar's avatar
      cosmetics: add missing 2D array braces · d22e2968
      John Koleszar authored
      Silences compile warning.
      
      Change-Id: I4b207d97f8570fe29aa2710e4ce4f02e7e43b57a
      d22e2968
    • John Koleszar's avatar
      avoid negative array subscript warnings · 392a9582
      John Koleszar authored
      The mv_ref and sub_mv_ref token encodings are indexed from NEARESTMV
      and LEFT4X4, respectively, rather than being zero-based like the
      other token encodings.
      
      Change-Id: I3699c3f84111209ecfb91097c4b900773e9a3ad5
      392a9582
    • Scott LaVarnway's avatar
      Finished vp8_sixtap_predict4x4_ssse3 function · b07e5b6f
      Scott LaVarnway authored
      Added vp8_filter_block1d4_h6_ssse3 and vp8_filter_block1d4_v6_ssse3
      assembly routines.  Also removed unused assembly.
      
      Change-Id: I01c1021835f2edda9da706822345f217087ca0d0
      b07e5b6f
    • Johann's avatar
      rename DETOK_[AL] · c0ba42d3
      Johann authored
      everything else uses lowercase detok
      
      Change-Id: I9671e2e90eb2961208dfa81c00b3accb5749ec04
      c0ba42d3
    • Scott LaVarnway's avatar
      Moved gf_active code to encoder only · 99f46d62
      Scott LaVarnway authored
      The gf_active code is only used by the encoder, so it was moved from
      common and decoder.
      
      Change-Id: Iada15acd5b2b33ff70c34668ca87d4cfd0d05025
      99f46d62
    • Yaowu Xu's avatar
      Removed duplicate functions · c404fa42
      Yaowu Xu authored
      Change-Id: Ie587972ccefd3c762b8cdf8ef39345cd22924b9b
      c404fa42
    • Yaowu Xu's avatar
      Normalize quantizer's zero bin and rounding factors · 3b95a46c
      Yaowu Xu authored
      This patch changes a few numbers in the two constant arrays
      for quantizer's zerobin and rounding factors, in general to
      make the sum of the two factors for any Q to be 128.  While
      it might be beneficial to calibrate the two arrays for best
      quantizer performance, it is not the purpose of this patch.
      Normalizing the two arrays will enable quick optimization
      of the current faster quantizer, i.e .zerobin check can be
      removed.
      
      Change-Id: If9abfd7929bf4b8e9ecd64a79d817c6728c820bd
      3b95a46c
    • Timothy B. Terriberry's avatar
      Add trellis quantization. · 8fa38096
      Timothy B. Terriberry authored
      Replace the exponential search for optimal rounding during
       quantization with a linear Viterbi trellis and enable it
       by default when using --best.
      Right now this operates on top of the output of the adaptive
       zero-bin quantizer in vp8_regular_quantize_b() and gives a small
       gain.
      It can be tested as a replacement for that quantizer by
       enabling the call to vp8_strict_quantize_b(), which uses
       normal rounding and no zero bin offset.
      Ultimately, the quantizer will have to become a function of lambda
       in order to take advantage of activity masking, since there is
       limited ability to change the quantization factor itself.
      However, currently vp8_strict_quantize_b() plus the trellis
       quantizer (which is lambda-dependent) loses to
       vp8_regular_quantize_b() alone (which is not) on my test clip.
      
      Patch Set 3:
      
      Fix an issue related to the cost evaluation of successor
      states when a coefficient is reduced to zero. With this
      issue fixed, now the trellis search almost exactly matches
      the exponential search.
      
      Patch Set 2:
      
      Overall, the goal of this patch set is to make "trellis"
      search to produce encodings that match the exponential
      search version. There are three main differences between
      Patch Set 2 and 1:
      a. Patch set 1 did not properly account for the scale of
      2nd order error, so patch set 2 disable it all together
      for 2nd blocks.
      b. Patch set 1 was not consistent on when to enable the
      the quantization optimization. Patch set 2 restore the
      condition to be consistent.
      c. Patch set 1 checks quantized level L-1, and L for any
      input coefficient was quantized to L. Patch set 2 limits
      the candidate coefficient to those that were rounded up
      to L. It is worth noting here that a strategy to check
      L and L+1 for coefficients that were truncated down to L
      might work.
      
      (a and b get trellis quant to basically match the exponential
      search on all mid/low rate encodings on cif set, without
      a, b, trellis quant can hurt the psnr by 0.2 to .3db at
      200kbps for some cif clips)
      (c gets trellis quant  to match the exponential search
      to match at Q0 encoding, without c, trellis quant can be
      1.5 to 2db lower for encodings with fixed Q at 0 on most
      derf cif clips)
      
      Change-Id:	Ib1a043b665d75fbf00cb0257b7c18e90eebab95e
      8fa38096
  5. 10 Aug, 2010 2 commits
    • Scott LaVarnway's avatar
      Added ssse3 version of sixtap filters · e4fe8669
      Scott LaVarnway authored
      Improved decoder performance by 9% for the clip used.
      
      Change-Id: I8fc5609213b7bef10248372595dc85b29f9895b9
      e4fe8669
    • Yunqing Wang's avatar
      First modification of multi-thread decoder · ba2e107d
      Yunqing Wang authored
      This is the first modification of VP8 multi-thread decoder, which uses
      same threads to decode macroblocks and then do loopfiltering for each
      frame.
      
      Inspired by Rob Clark, synchronization was done on every 8 macroblocks
      instead of every macroblock to reduce lock contention.
      
      Comparing with the original code, this implementation gave about 15%-
      20% performance gain while decoding my test clips on a Core2 Quad
      platform (Linux).
      
      The work is not done yet.
      
      Test on other platforms are needed.
      
      Change-Id: Ice9ddb0b511af1359b9f71e65066143c04fef3b5
      ba2e107d
  6. 09 Aug, 2010 1 commit
    • John Koleszar's avatar
      Mark loopfilter C functions as static · 618c7d27
      John Koleszar authored
      Clang defaults to C99 mode, and inline works differently in C99.
      (gcc, on the other hand, defaults to a special gnu-style inlining,
      which uses different syntax.)   Making the functions static makes sure
      clang doesn't decide to discard a function because it's too large to
      inline.
      
      Thanks to eli.friedman for the patch.
      
      Fixes http://code.google.com/p/webm/issues/detail?id=114
      
      Change-Id: If3c1c3c176eb855a584a60007237283b0cc631a4
      618c7d27
  7. 02 Aug, 2010 7 commits
  8. 29 Jul, 2010 2 commits
  9. 28 Jul, 2010 2 commits
    • Frank Galligan's avatar
      Removed two unused global variables. · 062e6c18
      Frank Galligan authored
      Removed the global variables vp8_an and vp8_cd. vp8_an was causing problems
      because it was increasing the .bss by 1572864 bytes.
      
      Change-Id: I6c12e294133c7fb6e770c0e4536d8287a5720a87
      062e6c18
    • Yaowu Xu's avatar
      Enable the switch between two versions of quantizer · f95c80b6
      Yaowu Xu authored
      To facilitate more testing related to quantizer and rate
      control, the old version quantizer is added back. old and
      new quantizer can be switched back and forth by define or
      un-define the macro "EXACT_QUANT".
      
      Change-Id: Ia77e687622421550f10e9d65a9884128a79a65ff
      f95c80b6
  10. 27 Jul, 2010 5 commits
    • John Koleszar's avatar
      configure: pass original arguments through to make dist · 23d68a5f
      John Koleszar authored
      When running configure automatically through the make dist target,
      reuse the arguments passed to the original configure command.
      
      Change-Id: I40e5b8384d6485a565b91e6d2356d5bc9c4c5928
      23d68a5f
    • John Koleszar's avatar
      Merge "msvs: fix install of codec sources" · aa82363c
      John Koleszar authored
      aa82363c
    • Johann's avatar
      x86/sse2: disable asm quantizer · a570bbd4
      Johann authored
      follow up to Change I0e51492d: neon: disable asm quantizer
      
      Now x86 doesn't segfault with --disable-runtime-cpu-detect and -p=2
      
      Change-Id: I8ca127bb299198efebbcbd5a661e81788361933f
      a570bbd4
    • Johann's avatar
      Fix build w/o RTCD · b9a038a5
      Johann authored
      So many places to update ...
      
      Change-Id: Ide957b40cc833f99c2d1849acade6850fbf7585d
      b9a038a5
    • John Koleszar's avatar
      neon: disable asm quantizer · d8009c07
      John Koleszar authored
      The assembly version of the quantizer has not been updated to match
      the new exact quantizer introduced in commit e04e2935. That commit tried
      to disable this code but missed the non-RTCD case.
      
      Thanks to David Baker <david.baker at openmarket.com> for isolating the
      issue and testing this fix.
      
      Change-Id: I0e51492dc6f8e44d2c10b587427448bf94135c65
      d8009c07
  11. 26 Jul, 2010 3 commits
    • Fritz Koenig's avatar
      Merge "update arm idct functions" · 1743f948
      Fritz Koenig authored
      1743f948
    • Fritz Koenig's avatar
      Merge changes I896fe6f9,I90d8b167 · 3de8a958
      Fritz Koenig authored
      * changes:
        Change the x86 idct functions to do reconstruction at the same time
        Combine idct and reconstruction steps
      3de8a958
    • Johann's avatar
      update arm idct functions · 56f5a9a0
      Johann authored
      Jeff Muizelaar posted some changes to the idct/reconstruction c code.
      This is the equivalent update for the arm assembly.
      
      This shows a good boost on v6, and a minor boost on neon.
      Here are some numbers for highway in qcif, 2641 frames:
      HEAD neon: ~161 fps
      new neon:  ~162 fps
      HEAD v6:   ~102 fps
      new v6:    ~106 fps
      
      The following functions have been updated for armv6 and neon:
      vp8_dc_only_idct_add
      vp8_dequant_idct_add
      vp8_dequant_dc_idct_add
      
      Conflicts:
      
      	vp8/decoder/arm/armv6/dequantdcidct_v6.asm
      	vp8/decoder/arm/armv6/dequantidct_v6.asm
      
      Resolved by removing these files. When I rewrote the functions, I also
      moved the files to dequant_dc_idct_v6.asm/dequant_idct_v6.asm
      
      Change-Id: Ie3300df824d52474eca1a5134cf22d8b7809a5d4
      56f5a9a0
  12. 23 Jul, 2010 3 commits