1. 12 Feb, 2013 4 commits
  2. 11 Feb, 2013 5 commits
  3. 09 Feb, 2013 6 commits
  4. 08 Feb, 2013 9 commits
    • John Koleszar's avatar
      Pass macroblock index to pick inter functions · 6125a1ed
      John Koleszar authored
      Pass the current mb row and column around rather than the
      recon_yoffset and recon_uvoffset, since those offsets will
      change from predictor to predictor, based on the reference
      frame selection.
      
      Change-Id: If3f9df059e00f5048ca729d3d083ff428e1859c1
      6125a1ed
    • John Koleszar's avatar
      Merge changes Icd1a2a5a,I204d17a1,I3ed92117 into experimental · 6dfc95fe
      John Koleszar authored
      * changes:
        Initial support for resolution changes on P-frames
        Avoid allocating memory when resizing frames
        Adds a test for the VP8E_SET_SCALEMODE control
      6dfc95fe
    • John Koleszar's avatar
      Merge changes Ife0d8147,I7d469716,Ic9a5615f into experimental · 3de8ee6b
      John Koleszar authored
      * changes:
        Restore SSSE3 subpixel filters in new convolve framework
        Convert subpixel filters to use convolve framework
        Add 8-tap generic convolver
      3de8ee6b
    • John Koleszar's avatar
      Initial support for resolution changes on P-frames · 393b4856
      John Koleszar authored
      Allows inter-frames to change resolution. Currently these are
      almost equivalent to keyframes, as only intra prediction modes
      are allowed, but without the other context resets that occur on
      keyframes.
      
      Change-Id: Icd1a2a5af0d9462cc792588427b0a1f5b12e40d3
      393b4856
    • John Koleszar's avatar
      Avoid allocating memory when resizing frames · c03d45de
      John Koleszar authored
      As long as the new frame is smaller than the size that was originally
      allocated, we don't need to free and reallocate the memory allocated.
      Instead, do the allocation on the size of the first frame. We could
      make this passed in from the application instead, if we wanted to
      support external upscaling.
      
      Change-Id: I204d17a130728bbd91155bb4bd863a99bb99b038
      c03d45de
    • John Koleszar's avatar
      Adds a test for the VP8E_SET_SCALEMODE control · 88f99f4e
      John Koleszar authored
      Tests that the external interface to set the internal codec scaling
      works as expected. Also updates the test to pull the height from
      the decoded frame size rather than parsing the keyframe header,
      in anticipation of allowing resolution changes on non-keyframes.
      
      Change-Id: I3ed92117d8e5288fbbd1e7b618f2f233d0fe2c17
      88f99f4e
    • John Koleszar's avatar
      Restore SSSE3 subpixel filters in new convolve framework · 29d47ac8
      John Koleszar authored
      This commit adds the 8 tap SSSE3 subpixel filters back into the code
      underneath the convolve API. The C code is still called for 4x4
      blocks, as well as compound prediction modes. This restores the
      encode performance to be within about 8% of the baseline.
      
      Change-Id: Ife0d81477075ae33c05b53c65003951efdc8b09c
      29d47ac8
    • Yunqing Wang's avatar
      Integerization of dct32x32 · dbccffe2
      Yunqing Wang authored
      Test on derf set showed 0.047% overall psnr change.
      
      Change-Id: Id16c276c251a3943850ac9b95e9b09a56cf42b19
      dbccffe2
    • Paul Wilkins's avatar
      Nearest / Zero Mv default entropy tweak. · bbede82f
      Paul Wilkins authored
      Tweak to default mode context to account for the fact
      that when there are no non zero motion candidates
      Nearest is now the preferred mode for coding a 0,0
      vector.
      
      Also resolve duplicate function name and typos.
      
      Change-Id: I76802788d46c84e3d1c771be216a537ab7b12817
      bbede82f
  5. 07 Feb, 2013 5 commits
    • Yaowu Xu's avatar
      move dct/idct constants to a header file · e6ad9ab0
      Yaowu Xu authored
      also removed some un-unsed functions.
      
      Change-Id: Ie363bcc8d94441d054137d2ef7c4fe59f56027e5
      e6ad9ab0
    • Jingning Han's avatar
      Butterfly ADST based hybrid transform · d15e1da4
      Jingning Han authored
      Refactor the 8x8 inverse hybrid transform. It is now consistent
      with the new inverse DCT. Overall performance loss (due to the
      use of this variant ADST, and the rounding errors in the butterfly
      implementation) for std-hd is -0.02.
      
      Fixed BUILD warning.
      
      Devise a variant of the original ADST, which allows butterfly
      computation structure. This new transform has kernel of the
      form: sin((2k+1)*(2n+1) / (4N)). One of its butterfly structures
      using floating-point multiplications was reported in Z. Wang,
      "Fast algorithms for the discrete W transform and for the discrete
      Fourier transform", IEEE Trans. on ASSP, 1984.
      
      This patch includes the butterfly implementation of the inverse
      ADST/DCT hybrid transform of dimension 8x8.
      
      Change-Id: I3533cb715f749343a80b9087ce34b3e776d1581d
      d15e1da4
    • Paul Wilkins's avatar
      Added skip switches for SB32 and SB64 · 29731308
      Paul Wilkins authored
      Added switches and code to skip/breakout from
      doing SB32 and SB64 tests based on whether
      the 16x16 MB tests used split modes. Also to
      optionally skip 64x64 if 16x16 was chosen over
      32x32.
      
      Impact varies depending on clip from a few %
      up to almost 50% on encode speed. Only the
      split mode breakout is currently enabled.
      
      Change-Id: Ib5836140b064b350ffa3057778ed2cadcc495cf8
      29731308
    • Ronald S. Bultje's avatar
      Use fdct8x4 instead of fdct4x4 where the block size allows it. · 5cfd82bc
      Ronald S. Bultje authored
      This allows for faster SIMD implementations in the future (currently
      there is no speed impact).
      
      Change-Id: I732647e9148b5dcb44e6bc8728138f0141218329
      5cfd82bc
    • Ronald S. Bultje's avatar
      Use configure checks for various inline keywords. · aac73df1
      Ronald S. Bultje authored
      Change-Id: I8508f1a3d3430f998bb9295f849e88e626a52a24
      aac73df1
  6. 06 Feb, 2013 6 commits
  7. 05 Feb, 2013 5 commits
    • Ronald S. Bultje's avatar
      [WIP] Add column-based tiling. · 1407bdc2
      Ronald S. Bultje authored
      This patch adds column-based tiling. The idea is to make each tile
      independently decodable (after reading the common frame header) and
      also independendly encodable (minus within-frame cost adjustments in
      the RD loop) to speed-up hardware & software en/decoders if they used
      multi-threading. Column-based tiling has the added advantage (over
      other tiling methods) that it minimizes realtime use-case latency,
      since all threads can start encoding data as soon as the first SB-row
      worth of data is available to the encoder.
      
      There is some test code that does random tile ordering in the decoder,
      to confirm that each tile is indeed independently decodable from other
      tiles in the same frame. At tile edges, all contexts assume default
      values (i.e. 0, 0 motion vector, no coefficients, DC intra4x4 mode),
      and motion vector search and ordering do not cross tiles in the same
      frame.
      t log
      
      Tile independence is not maintained between frames ATM, i.e. tile 0 of
      frame 1 is free to use motion vectors that point into any tile of frame
      0. We support 1 (i.e. no tiling), 2 or 4 column-tiles.
      
      The loopfilter crosses tile boundaries. I discussed this briefly with Aki
      and he says that's OK. An in-loop loopfilter would need to do some sync
      between tile threads, but that shouldn't be a big issue.
      
      Resuls: with tiling disabled, we go up slightly because of improved edge
      use in the intra4x4 prediction. With 2 tiles, we lose about ~1% on derf,
      ~0.35% on HD and ~0.55% on STD/HD. With 4 tiles, we lose another ~1.5%
      on derf ~0.77% on HD and ~0.85% on STD/HD. Most of this loss is
      concentrated in the low-bitrate end of clips, and most of it is because
      of the loss of edges at tile boundaries and the resulting loss of intra
      predictors.
      
      TODO:
      - more tiles (perhaps allow row-based tiling also, and max. 8 tiles)?
      - maybe optionally (for EC purposes), motion vectors themselves
        should not cross tile edges, or we should emulate such borders as
        if they were off-frame, to limit error propagation to within one
        tile only. This doesn't have to be the default behaviour but could
        be an optional bitstream flag.
      
      Change-Id: I5951c3a0742a767b20bc9fb5af685d9892c2c96f
      1407bdc2
    • Ronald S. Bultje's avatar
    • Yaowu Xu's avatar
    • Yaowu Xu's avatar
      c9ae73b2
    • Ronald S. Bultje's avatar
      Add SSE3 versions for sad{32x32,64x64}x4d functions. · 58c983d1
      Ronald S. Bultje authored
      Overall encoding about 15% faster.
      
      Change-Id: I176a775c704317509e32eee83739721804120ff2
      58c983d1