group vp8/vp9 only options under CONFIG_*_ENCODER

Change-Id: I331bb154df019b398780be6451355de50657a33e

Putting appropriate check to open_output_file() and close_output_file().
Before that the output file has been opened twice during two-pass encoding.

Change-Id: I290cecf00513d6a31ca3f45bc20fef7efcb10190

rewind() does not work on pipes.

https://code.google.com/p/webm/issues/detail?id=678

Change-Id: I057f1e25c3f5662012d6e33ff4c97c88f50df357

- Add command line args that allow display of warnings without prompting
  for user input.
- Extend warning code to make it somewhat scalable.

Change-Id: I2bad8f9315f6eed120c2e1bbe0a2a5ede15fbf35

The idea here is to allow "in frame" adjustment of the final Q
value used to encode each SB64, using segmentation.

There is also adjustment of the rd mult in regions of overspend.

Activated using aq_mode=2

Change-Id: I2f140cd898c9f877c32cd6d2e667f5e11ada4b1c

- Rename the struct to VpxEncoderConfig.
- The idea behind this is to enable checking the global settings against
  stream specific settings in source files other than vpxenc.c.

Change-Id: Ic736cbb714845b9466acb34671780d65b83ad1a8

Change-Id: I2a08c00e8576099abc84b6ef05cb3567426e29cf

Also, clean up stylistically questionable code near my changes.

Change-Id: I92c96a274cb339b7b74174a608f94ae86aba8354

Change-Id: I57e1ad4bed3487df12893ced77c49093f8755706

- Move IVF reading support into ivfdec.c and ivfdec.h
- Move IVF writing support into ivfenc.c and ivfenc.h
- Removed IVF writing code from the SVC example in favor of ivfenc.

Change-Id: I70adf6240d0320fdd232d8546ed573f0f68dd793

Change-Id: I6b245ef5017c49373ba33e30f8fbf3d1b97409b5

Relocate it to tools_common.h so we can stop duping this code
everywhere.

BUG=https://code.google.com/p/webm/issues/detail?id=660

Change-Id: If8aa49b74d297273cd9fd7006b2767837055a359

Change-Id: Ida0e1b2df89e992b8140672b70517d8623cf9ede

This is mainly a clean up patchset. It moves the WebM writing support
out of vpxenc and into its own source file. Changes to tools_common and
vpxdec result from relocation of shared bits of code.

Change-Id: Iee55d3285f56e0a548f791094fb14c5ac5346a26

First pass does not produce compressed data, therefore encode/decode
match check is not initialized.

Change-Id: I1971a6747337872a850987cc70ba267bd0f1d564

Change-Id: Id0bfaedf54ff3f59d4cf361c170a0b5a5711e5f2

The FrameRate element has been deprecated.

Change-Id: I68ac496e7b33685a100a45d2772e0ff30eb6a811

Change-Id: I76f440a917832c02d7a727697b225bac66b99f56

Change-Id: Id9ce44f3364dd57b30ea491d956a2a0d6186be05

Adds a new end-usage option for constant quality encoding in vpx. This
first version implemented for VP9, encodes all regular inter frames
using the quality specified in the --cq-level= option, while encoding
all key frames and golden/altref frames at a quality better than that.

The current performance on derfraw300 is +0.910% up from bitrate control,
but achieved without multiple recode loops per frame.

The decision for qp for each altref/golden/key frame will be improved
in subsequent patches based on better use of stats from the first pass.
Further, the qp for regular inter frames may also be varied around the
provided cq-level.

Change-Id: I6c4a2a68563679d60e0616ebcb11698578615fb3

Currently, the best quality mode in VP9 is not very well developed,
and unnecessarily makes the encode too slow. Hence the command line
default is changed to "good" quality. Also, the number of passes
default is changed to 2 passes as well, since 1-pass encoding is
not very efficient in VP9.

Besides, a number of VP9 defaults are set to the currently
recommended settings. With these changes, vpxenc
run with --codec=vp9 --kf-max-dist=9999 --cpu-used=0 should
work about the same as our borg results.
Note when the --cpu-used=0 option is dropped there will be a slight
difference in the output, because of a difference in the cpu-used
value for the first pass. Specifically, the default when unspecified
is to use cpu_used=1 for the first pass and cpu_used=0 for the
second pass. But when specified, both passes will use the cpu-used
value specified.

Note that this also changes the default for VP8 as being "good"
but other options stay unchanged.

Change-Id: Ib23c1a05ae2f36ee076c0e34403efbda518c5066

write_ivf_file_header would incorrectly skip writing the file header in
the 2nd pass, causing the initial frame header to be overwritten on
close potential causing an overly large frame header to be read and a
crash.

most likely broken since:
9e50ed7f vpxenc: initial implementation of multistream support

fixes issue #585

Change-Id: I7e863e295dd6344c33b3e9c07f9f0394ec496e7b

Thanks to hiiragikei AT gmail.com for the fix.

Change-Id: Iab6c0822593fc5557d86efbb014ff6409ff05b35

Looks like test code.

Change-Id: I5deae2bf14ea6fdcbb9b9d993966c9abef95eb2e

These files can stand in until we get proper syntax vectors. They
should provide some additional assurance against inadvertant
bitstream changes.

Change-Id: I12f6c9a5f054e30df40a7ff1f33145abf7e1d59d

Fixes a condition where the address of the mismatching pixels was not
being found/printed.

Change-Id: Ifac5cd3471bc2437448128591eea7c7b87e2d8fe

Change-Id: Iffe7c2e6c6cb14b637420ffc368a5003f5db42fa

Adds a new experiment CONFIG_NON420 that allows other chroma subsamplings
to be passed to the codec. This commit allows the data to be passed from
a y4m input file through vpxenc to the codec, where they're currently
rejected. Later commits will finish support for this inside the codec.

Change-Id: Ib3aac604d8cad9e24cef395fa1067f16ba7e8e43

Clamp only the motion vectors inferred from neighboring reference
macroblocks. The motion vectors obtained through motion search in
NEWMV mode are constrained during the search process, which allows
a relatively larger referencing region than the inferred mvs.
Hence further clamping the best mv provided by the motion search may
affect the efficacy of NEWMV mode.

Synchronized the decoding process. The decoded mvs in NEWMV modes
should be guaranteed to fit in the effective range. Put a mv range
clamping function there for security purpose.

This improves the coding performance of high motion sequences, e.g.,
derf set:
foreman 0.233%
husky   0.175%
icd     0.135%
mother_daughter 0.337%
pamphlet        0.561%

stdhd set:
blue_sky 0.408%
city     0.455%
also saw sunflower goes down by -0.469%.

Change-Id: I3fcbba669e56dab779857a8126a91b926e899cb5

Restore ABI compatibility with the master branch.

Change-Id: Ic57e7e1de09ab33bd37990e52a63ba7c8f1432a4

Adds an experiment to use a weighted prediction of two INTER
predictors, where the weight is one of (1/4, 3/4), (3/8, 5/8),
(1/2, 1/2), (5/8, 3/8) or (3/4, 1/4), and is chosen implicitly
based on consistency of the predictors to the already
reconstructed pixels to the top and left of the current macroblock
or superblock.

Currently the weighting is not applied to SPLITMV modes, which
default to the usual (1/2, 1/2) weighting. However the code is in
place controlled by a macro. The same weighting is used for Y and
UV components, where the weight is derived from analyzing the Y
component only.

Results (over compound inter-intra experiment)
derf: +0.18%
yt: +0.34%
hd: +0.49%
stdhd: +0.23%

The experiment suggests bigger benefit for explicitly signaled weights.

Change-Id: I5438539ff4485c5752874cd1eb078ff14bf5235a

Changing 0x00 ('') fourcc byte to 0x30 ('0'). For VP8 from
0x00385056 to 0x30385056, for VP9 from 0x00395056 to 0x30395056.

Change-Id: I26b1b603c20dd41f7aeabf8cd7893dfd5b1c8b59

This is like VP8_COPY_REFERENCE, but returns a pointer to the reference
frame rather than a copy of it. This is useful when the application
doesn't know what the size of the reference is, as is the case when
scaling is in effect.

Change-Id: I63667109f65510364d0e397ebe56217140772085

Account for skipped input frames when calculating frame rates, ETA.

Fixes https://code.google.com/p/webm/issues/detail?id=556

Change-Id: I9c8b51e02e9ff0ab2cf6f16fc9382fc7f6c77b80

Because ctx->err is not set in that case, it will not report the error
on stderr.

Change-Id: Ifacbf5a03e676fd56522b03c0281d6c723c563ee

Fixes a rollover of the cx_time variable for encodes that take
over ~4200 seconds. Also enable the time estimate in first pass.

Change-Id: Ib5a98ee71bccd79a804d709cec7260651d0b7141

Scales the input of the encoder using libyuv's "box filter". Each stream
may have a different width and height specified. If the width (or
height) parameter is missing (or is explicitly set to 0) then the value
will be calculated based on the specified height (or width) and the
input file's dimensions, preserving its aspect ratio. Leaving the height
unspecified behaves similarly.

Change-Id: I700ef89ce54fb87588420a71c39c0e3e73b1a40e

Allows the user to specify whether decode errors should be fatal or not.
Also makes mismatches optionally fatal.

Change-Id: I58cff4a82f3d42f5653b91cf348a7f669377e632

Make the progress line more useful by providing per-frame updates of
processing frame rate and estimated time remaining.

Fixes issue #534.

Change-Id: Ic91551878ff4b2f5db1cedaafb588add220cfa52

Fixes a rollover of the cx_time variable for encodes that take
over ~4200 seconds. Also enable the time estimate in first pass.

Change-Id: Ib5a98ee71bccd79a804d709cec7260651d0b7141