Removed the experimental flag from around the prediction filter.

Change-Id: Ic1dd2db8fe8ac17ed5129f83094d4c5cdd5527d2

This prevents ill-defined behaviour, such as setting x->skip for a mode
that is excluded because of frame-level flags (e.g. filter selection,
compound prediction selection), then not breaking out of the RD loop
because the mode is not allowed, but keeping the flag on. Whatever mode
is iterated through next in the RD loop will then carry this flag, and
all sort of bad stuff happens, such as x->skip being set on intra pred
modes.

Change-Id: I5bec46b36e38292174acb1c564b3caf00a9b4b9a

Previous commit does not build cleanly on Jenkins with the DWT/DCT
hybrid experiment enabled (--enable-dwtdcthybrid).

Change-Id: Ia67e8f59d17ef2d5200ec6b90dfe6711ed6835a5

Fixes some scaling issues. Adds an option to only compute the
dct on the low-low subband for 32x32 and 64x64 blocks using
only a single 16x16 dct after 1 and 2 wavelet decomposition
levels respectively. Also adds an option to use a 8x8 dct
as building block.

Currenlty with the 2/6 filter and with a single 16x16 dct on
the low low band, the reuslts compared to full 32x32 dct is
as follows:
derf: -0.15%
yt: -0.29%
std-hd: -0.18%
hd: -0.6%
These are my current recommended settings, since the 2/6 filter
is very simple.

Results with 8x8 dct are about 0.3% worse.

Change-Id: I00100cdc96e32deced591985785ef0d06f325e44

and vp9_mb_lpf_vertical_edge_w_sse2.  This was quickly done so we can
run some tests over the weekend.  Future commits will optimize/refactor these
functions further.

The decoder performance improved by ~17% for the clip used.

Change-Id: I612687cd5a7670ee840a0cbc3c68dc2b84d4af76

On block boundary within a MB when 8x8 block boundary only is filtered
for Y.

Change-Id: Ie1c804c877d199e78e2fecd8c2d3f1e114ce9ec1

See https://codereview.chromium.org/11875006/

Change-Id: Ied2a17df2b3222635f84aef120eaa9feb53750d2

Updated the rtcd_defs and used the sse2 uv version
of the loopfilter.  The performance improved by ~8%
for the test clip used.

Change-Id: I5a0bca3b6674198d40ca4a77b8cc722ddde79c36

Replace INT64_MAX references with LLONG_MAX
for windows build.

Change-Id: Ib8b45c1e9c15c043b2f54c27ed83b8682b2be34f

Change-Id: I8826bcdcf72ba6d86bde31cd13902a710399805c

The commit changed to not to use wider lpf within a superblock when
32x32 transform is used for the block.

The commit also changed to use the shorter version of loop filtering:
for UV planes.

Change-Id: I344c1fb9a3be9d1200782a788bcb0b001fedcff8

Change-Id: Id9474a1686daebfa3d004e21823bf1888ec9e534

Change-Id: I615651e4c7b09e576a341ad425cf80c393637833

Change-Id: If6c88752dffdb566f8d4322f135145270716fb8e

when larger transforms are used

Change-Id: I25251442b44bf251df4c25a1c1fcf71fb2ad913b

This patch removes the old pred-filter experiment and replaces it
with one that is implemented using the switchable filter framework.

If the pred-filter experiment is enabled, three interopolation
filters are tested during mode selection; the standard 8-tap
interpolation filter, a sharp 8-tap filter and a (new) 8-tap
smoothing filter.

The 6-tap filter code has been preserved for now and if the
enable-6tap experiment is enabled (in addition to the pred-filter
experiment) the original 6-tap filter replaces the new 8-tap smooth
filter in the switchable mode.

The new experiment applies the prediction filter in cases of a
fractional-pel motion vector. Future patches will apply the filter
where the mv is pel-aligned and also to intra predicted blocks.

Change-Id: I08e8cba978f2bbf3019f8413f376b8e2cd85eba4

This is to add to the 64x64 transform experiment as an alternative to
a 64x64 DCT.
Two levels of wavelet decomposition is used on a 64x64 block, followed
by 16x16 DCT on the four lowest subbands. The highest three subbands
are left untransformed after the first level DWT.

Change-Id: I3d48d5800468d655191933894df6b46e15adca56

Change-Id: I0df99742029834a85c4933652b0587cf5b6b2587

About 5% decoder speedup.

Change-Id: Ib6687d337af758a536a0e7e289f400990f1f9794

Incorportate vp9-preview changes by merging master branch into experimental.

Conflicts:
	test/test.mk
	vp9/common/vp9_filter.c
	vp9/common/vp9_idctllm.c
	vp9/common/vp9_invtrans.h
	vp9/common/vp9_mbpitch.c
	vp9/common/vp9_rtcd_defs.sh
	vp9/common/vp9_systemdependent.h
	vp9/common/vp9_type_aliases.h
	vp9/common/x86/vp9_asm_stubs.c
	vp9/common/x86/vp9_subpixel_mmx.asm
	vp9/decoder/vp9_decodframe.c
	vp9/decoder/vp9_dequantize.c
	vp9/decoder/vp9_dequantize.h
	vp9/decoder/vp9_onyxd_int.h
	vp9/encoder/vp9_bitstream.c
	vp9/encoder/vp9_encodeframe.c
	vp9/encoder/vp9_rdopt.c

Change-Id: I17f51c3666d1b59cf1a699f87607cbc5d30a87c5

This is to fix a decoder crash when decoder skips a number of frame to
continue decoding from a later key frame.

Change-Id: I3ba116eba6c3440e0528a21f53745f694302e4ad

This commit did a couple of minor cleanup/refactoring to prepare for
futher loop filter experiments. It merged y_only version of loop filter
function into the regular one, which makes sure that same logic is used
for functions for picking level and for actual loop filtering.

Change-Id: Id10c94dccd45f58e5310bacfdf6ee63cbb60b86f

Also reindent a block of code that was misindented after addition of
the tx32x32 experiment.

Change-Id: Ic3e4aae3effd8a40136da68c9f382af03632ba08

Change-Id: Ibd7380f478d3127f9db91d0a4fd2fd0dfde961ab

Change-Id: Ib674e0153ca360867ab7a20ba291ac9171a01250

3.2% gains on std/hd, 1.0% gains on hd.

Change-Id: I481d5df23d8a4fc650a5bcba956554490b2bd200

Mode selection for SBs could enter an infinite loop because
the interpolation filter mode index was not being reset
correctly.

Change-Id: I4bbe726f29ef5b6836e94884067c46084713cc11

This experimental change reorders the search so
that all possible references that match the target
reference frame are tested first and these in order
of distance from the current block. These will usually
be the highest scoring candidates.

If we do not find enough good candidates this way
we try non matching cases. These will usually be lower
scoring candidates.

The change in order together with breakouts when
we have found enough candidates should reduce
the computational cost and especially reduce the number
of sort operations.

Quality Results:
Std Hd +0.228%, Hd +0.074%, YT +0.046%, derf +0.137%

This effect is probably due to the fact that more distant
weak candidates are now less likely to get "promoted" over
near candidates even if they are repeated.

Change-Id: Iec37e77d88a48ad0ee1f315b14327a95d63f81f6

Use the proper seg/mode/ref filter offsets when selecting the
frame loop filter level for fast mode (pick_filter_level_fast).

Change-Id: I2473e2131c800ad19755cb6211ad735fecfe2ac0